http://bugs.freedesktop.org/show_bug.cgi?id=12552
--- Comment #32 from Lucas <[EMAIL PROTECTED]> 2008-01-25 08:16:05 PST --- Created an attachment (id=13949) --> (http://bugs.freedesktop.org/attachment.cgi?id=13949) xorg log with external plugged in Wow, lots of news to say, with the external diplay plugged in. I didn't made the colortilling options now I will test that after. Here is the test : Start normally : (second monitor out) Plug the monitor and restart X. The LVDS starts at 1400x 1050 while the other one starts at 1280x1024 with missing part on the bottom and missing the black stripe. Then I switch off LVDS : The black stripe is stile there but, this time the desktop is fully displayed. (the bottom isn't missing and the right part that was missing is displayed at the left of the black stripe). So the desktop is a little bit streched in. Then I do xrandr --output VGA-0 --mode 1024x768 and now the desktop is fully displayed and use the whole screen. (perfect but not at the right resolution) Then I do xrandr --output VGA-0 --auto and the black stripe is back, but the bottom is still displayed. Then I do xrandr --output LVDS --auto and the bottom goes out of the external display. Next step: redo all of this but with the suggested options. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
