Hi, thanks for looking at this .. comments inline
Michel Dänzer wrote: > On Tue, 2008-06-10 at 21:45 +0400, Alex Tomas wrote: >> Michel Dänzer wrote: >>> On Mon, 2008-06-09 at 10:58 +0400, Alex Tomas wrote: >>>> I've got couple movies which lockup (almost) system in a second. >>>> if I disable DRI the problem disappear, >>> What if you don't specify Option "AGPMode" instead, and possibly play >>> with the AGP settings in the BIOS setup? Or if you use Option "BusType" >>> "PCI"? >> Tried with "PCI" in xorg.conf - same result. > > Did you verify in the log file that the option was recognized as > intended? (II) RADEON(0): PCI card detected (**) RADEON(0): Forced into PCI mode looks correct? >>>> but then I can't use hw scaling. >>> Why not? >> If I disable DRI -vo xv doesn't work anymore. > > Define "doesn't work". It should work regardless with your card. 1) EXA is not enabled, DRI is disabled VO: [xv] 720x304 => 720x304 Planar YV12 X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 2) EXA is not enabled, DRI is enabled VO: [xv] 720x304 => 720x304 Planar YV12 X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0 3) EXA is enabled, DRI is enabled the card locks up, radeon is spinning in that routine. 4) EXA is enabled, DRI is enabled, PCI forced the card locks up 5) EXA is enabled, DRI is disabled, PCI forced (EE) RADEON(0): Idle timed out, resetting engine... (EE) RADEON(0): Idle timed out, resetting engine... thanks, Alex _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
