Update. I found the other dynamic options in the source. When I do: xrandr --output S-video --set tv_horizontal_size -5 or: xrandr --output S-video --set tv_horizontal_position -5
The picture does shrink/move but it is still truncated. Alon. On 9/11/08, Alon Bar-Lev <[EMAIL PROTECTED]> wrote: > > Hello, > > I wasn't aware that TV out was merged... I noticed the S-video interface at > xrandr and thought I should check it. > > I could not make the Gatos work for me... So something must be fixed now. > > Thank you! > > The problem is that about 25 pixels are missing from the right part of the > display. As a result the picture is truncated. > > I tried every TVStandard option available and no change. > I also tried a few Modeline from past and no change. > I tried dynamic and static configurations and no change. > > Does anyone has a clue? > > I use: > xf86-video-ati-6.9.0 > 01:00.0 0300: 1002:4e50 VGA compatible controller: ATI Technologies Inc > RV350 [Mobility Radeon 9600 M10] > > xrandr output: > > Screen 0: minimum 320 x 200, current 800 x 600, maximum 1400 x 1200 > VGA-0 disconnected (normal left inverted right x axis y axis) > DVI-0 disconnected (normal left inverted right x axis y axis) > LVDS connected 800x600+0+0 (normal left inverted right x axis y axis) 0mm x > 0mm > 1400x1050 60.2 + > 1280x1024 60.0 > 1280x960 60.0 > 1024x768 60.0 59.9 > 800x600 60.3* 59.9 > 640x480 59.9 > S-video connected 800x600+0+0 (normal left inverted right x axis y axis) 0mm > x 0mm > 800x600 59.9*+ > > Following relevant xorg.conf sections: > > --- > > Section "Device" > Option "TVDACLoadDetect" "on" > Option "DefaultTVDACAdj" "on" > Option "TVStandard" "pal" > Option "monitor-S-video" "TV-monitor" > > Identifier "TV" > Driver "radeon" > VendorName "ATI Technologies Inc" > BoardName "RV350 [Mobility Radeon 9600 M10]" > BusID "PCI:1:0:0" > EndSection > > Section "Monitor" > Identifier "TV" > > Option "PreferredMode" "800x600" > # Modeline "800x600" 37.44 800 816 928 1072 600 600 605 626 > # Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 > +HSync +VSync > # Modeline "800x600" 43.68 800 816 928 1072 600 600 610 626 > # Modeline "800x600" 49.92 800 816 928 1072 600 600 610 626 > # Modeline "800x600" 56.16 800 816 928 1072 600 600 610 626 > # Modeline "800x600" 62.40 800 816 928 1112 600 600 610 626 > > EndSection > > Section "Screen" > Identifier "TV" > Device "TV" > Monitor "TV" > > DefaultDepth 24 > SubSection "Display" > Depth 24 > Modes "800x600" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "TV" > Screen "TV" > InputDevice "Mouse1" "CorePointer" > InputDevice "Keyboard1" "CoreKeyboard" > EndSection > > --- > > Thank you, > > Alon Bar-Lev. > _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
