On Mon, Feb 16, 2009 at 12:54 PM, Miloslav Semler <[email protected]> wrote: > Thanks a lot for your tip. So it works only with 1 and 2 agp mode. >
I've pushed a quirk to ati git master: 036a17bec5dabbb91640b907811da060dac154d6 Alex >> On Sun, Feb 15, 2009 at 4:49 PM, Miloslav Semler <[email protected]> wrote: >>> Package: xserver-xorg-video-radeon >>> Version: 1:6.9.0-1+lenny4 >>> Severity: important >>> >>> Hello, >>> I have an problem with driver xserver-xorg-video-radeon. If I start >>> x.org with this driver, it consumes 95+% cpu and do nothing. Instead of >>> continuing in boot, it hangs and shut down monitor to DMPS. I tested >>> older kernel, which worked ok, but now it does same. The problem was >>> occured when I upgraded from sarge to lenny. Xserver is binary >>> distribution, drivers and kernel too. I also tested default x.org >>> configuration, but there was same results. Now I must use >>> framebuffer. It works, but performace is very poor. >>> >> >> Sounds like an AGP problem. Try setting another AGP mode. Add the >> following option to the device section of your config: >> Option "AGPMode" "X" >> where X = 1 or 2 or 4 or 8. >> When you find an AGP mode that works, let me know and I'll add a quirk >> to the driver. >> >> Alex > > _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
