http://bugs.freedesktop.org/show_bug.cgi?id=21050
--- Comment #9 from Phil Armstrong <[email protected]> 2009-04-06 08:31:58 PST --- I can give it a go. BTW, according to xrandr, coherent mode is set on for both output ports: $ xrandr --prop DVI-1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 546mm x 352mm EDID_DATA: 00ffffffffffff0022f0f72601010101 2912010380362378eece50a3544c9926 0f5054a56b808140a900a940b300d100 010101010101283c80a070b023403020 360022602100001a000000fc00485020 4c5032343735770a2020000000fd0030 551e5e11000a202020202020000000ff 00435a43383431303635480a20200066 dvi_monitor_type: auto scaler: full coherent_mode: 1 (0x00000001) range: (0,1) load_detection: 1 (0x00000001) range: (0,1) 1920x1200 60.0*+ 1600x1200 60.0 1680x1050 59.9 1600x1000 60.0 1280x1024 75.0 1280x960 60.0 1152x864 75.0 1024x768 75.0 60.0 832x624 74.6 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 DVI-0 disconnected (normal left inverted right x axis y axis) dvi_monitor_type: auto scaler: full coherent_mode: 1 (0x00000001) range: (0,1) load_detection: 1 (0x00000001) range: (0,1) -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
