Alex Deucher wrote:
On Wed, May 20, 2009 at 3:50 AM, Paul Jones <[email protected]> wrote:
Michel Dänzer wrote:
On Tue, 2009-05-19 at 03:35 -0400, Paul Jones wrote:
Hi everyone, I'm using an ATI Radeon X1650 8x AGP card with a Pentium 4
board. When gdm is about to start X, I get a blank screen and a totally
unresponsive computer, no ctrl-alt-backspace or anything, and the
monitor turns off because it is receiving no input. I need to hard reboot.
I just started using this new ASRock motherboard because the usb ports
on my old motherboard were shot, but the 3D acceleration did work on the
old motherboard.
Everything works fine when I boot with DRI disabled. These problems only
occur when I try 3D.
I've tried several things, like switching between XXA and EXA, forcing
PCI mode, bypassing gdm and typing X in a virtual terminal, adding no
options to the device section, none of it makes a difference.
Can you provide log files from trying with either of
Option "BusType" "PCI"
Option "AGPMode" "4"
? (Please attach the files directly to your post rather than referencing
a pastebin site)
Thanks for responding. I just upgrade to the version in git, and applied
the patches that were attached in the bug report of random X hard lockups.
This did not resolve my problem.
Here are the respective log problems asked for. They are quite similar.
Does the system still hang with those options?
Would it be helpful if I provided a backtrace from a ssh. I remember being
asked to do this before and succeeding, I just need to follow the guide.
Please.
Alex
Yes, the system hangs as soon as gdm starts X. Hard Locks regardless of
what options I use or do not use.
I can't get a backtrace with ssh because X isn't running when I ssh in.
Sometimes the computer itself is completely unresponsive and I can't ssh
at all.
On very rare occaissions, I can get it started with dri enabled, but X
will eventually hang anyway.
I'm attaching a gdb that I collected using the single machine method
from the affected machine.
By the way I go by "ZitZ" in the #radeon irc.
PJ
[Thread debugging using libthread_db enabled]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-686 i686 Debian
Current Operating System: Linux Paul 2.6.29-2-686 #1 SMP Sun May 17 17:56:29
UTC 2009 i686
Build Date: 14 May 2009 05:49:41PM
xorg-server 2:1.6.1.901-2 ([email protected])
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 20 13:36:11 2009
(==) Using config file: "/etc/X11/xorg.conf"
[tcsetpgrp failed in terminal_inferior: Operation not permitted]
[New Thread 0xb7b07720 (LWP 2984)]
(EE) Failed to load module "freetype" (module does not exist, 0)
(EE) Failed to load module "type1" (module does not exist, 0)
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_KLDSCP_DAC2
DFP1: INTERNAL_KLDSCP_TMDS1
DDC reg: 0x7e50
finished output detect: 0
Dac detection success
Unhandled monitor type 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
Dac detection success
Unhandled monitor type 0
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Mode 1280x1024 - 1688 1066 5
freq: 108000000
best_freq: 108000000
best_feedback_div: 48
best_frac_feedback_div: 0
best_ref_div: 2
best_post_div: 6
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DAC1 setup success
Output CRT1 enable success
Enable CRTC 0 success
Unblank CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
SELinux: Disabled on system, not enabling in X server
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
_______________________________________________
xorg-driver-ati mailing list
[email protected]
http://lists.x.org/mailman/listinfo/xorg-driver-ati
