http://bugs.freedesktop.org/show_bug.cgi?id=24604
--- Comment #4 from V0id <[email protected]> 2009-10-18 16:52:51 PST --- Ok. With the first modeline that you suggested it works fine, but it is really more mensurable for eyes to work with 100Hz refresh rate on CRT monitor, so I tried to generate new modelines (modeline from my xorg.conf with working form me for years without any problems) with cvt and gtf: # 1024x768 99.97 Hz (CVT) hsync: 81.58 kHz; pclk: 112.25 MHz Modeline "1024x768_100.00cvt" 112.25 1024 1096 1200 1376 768 771 775 816 -hsync +vsync # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz Modeline "1024x768_100.00gtf" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync Both producing same distortion as I described in my initial post. Then I switched back to your modeline ("1024x768_85.00cvt") to get good screen and then tried to switch to 800x600 mode with systemsettings from kde4 (it's really annoying to restart X every time, moreover it is refuses to start after two restarts and I have to reboot my computer). In 800x600 mode screen is also distorted. Here is a modeline from xvidtune: "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync After switching back to 1024x...@85 it works fine again. P.S. I'm sure that my monitor and videocard is fine as it was working fine in 1024x...@100 mode for years in Linux and still working fine in this mode in Windows. So it's really desirable to get back 1024x...@100 in Linux. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
