On Sat, Dec 26, 2009 at 3:19 AM, Alberto Hernando <[email protected]> wrote: > Hi all. > > Here I come again with this that I've never been be able to make work. But > now, I've read in the list about people that have their asus pundit-r > working nicely with tv-out and the radeon driver, so I must too ;) > > Well, I built a new lfs-6.5 with: > xf86-video-ati-6.12.4 > xorg-server-1.7.1
Only NTSC works on pre-AVIVO IGP chips at the moment. I figured out the plls for PAL on older IGPs, but never got the crtc timing sorted out. Alex > > This is the xorg.conf file I'm using, mostly created by xorg itself: > > Section "ServerLayout" > Identifier "X.org Configured" > Screen 0 "Screen0" 0 0 > # InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > ModulePath "/usr/lib/X11/modules" > FontPath "/usr/lib/X11/fonts/misc/" > FontPath "/usr/lib/X11/fonts/TTF/" > FontPath "/usr/lib/X11/fonts/OTF" > FontPath "/usr/lib/X11/fonts/Type1/" > FontPath "/usr/lib/X11/fonts/100dpi/" > FontPath "/usr/lib/X11/fonts/75dpi/" > EndSection > > Section "Module" > Load "extmod" > Load "dri" > Load "dbe" > Load "dri2" > Load "glx" > # Load "record" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > EndSection > > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "auto" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5 6 7" > EndSection > > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "Monitor Model" > EndSection > > > Section "Device" > # lots of commented options > Option "ForceTVOut" "True" > Option "TVStandard" "pal" > Identifier "Card0" > Driver "radeon" > VendorName "Unknown Vendor" > BoardName "Unknown Board" > BusID "PCI:1:5:0" > EndSection > > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 16 > SubSection "Display" > Viewport 0 0 > Depth 1 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 4 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 8 > EndSubSection > SubSection "Display" > : Viewport 0 0 > Depth 15 > EndSubSection > SubSection "Display" > Viewport 0 0 > Modes "800x600" > Depth 16 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 24 > EndSubSection > EndSection > > > And what I get is a dark and out-of-sync image. I use x11vnc to check what I > should be seeing, and twm works, even glxgears works with DRI. I also get > this log: > > X.Org X Server 1.7.1 > Release Date: 2009-10-23 > X Protocol Version 11, Revision 0 > Build Operating System: Linux 2.6.31.6-tgl2 i686 > Current Operating System: Linux tinglao 2.6.31.6-tgl2 #1 SMP PREEMPT Fri Dec > 11 21:54:05 CET 2009 i686 > Kernel command line: auto BOOT_IMAGE=2.6.31.6-tgl2 ro root=303 > Build Date: 12 December 2009 01:23:45PM > > Current version of pixman: 0.15.20 > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 26 09:14:26 2009 > (==) Using config file: "/etc/X11/xorg.conf" > NTSC PAL PAL-M NTSC-J > XRANDR name: VGA-0 > Connector: VGA > CRT1: INTERNAL_DAC2 > DDC reg: 0x60 > XRANDR name: DVI-0 > Connector: DVI-D > DFP2: INTERNAL_DVO1 > DDC reg: 0x6c > XRANDR name: S-video > Connector: S-video > TV1: INTERNAL_DAC2 > DDC reg: 0x0 > finished output detect: 0 > finished output detect: 1 > finished output detect: 2 > finished all detect > before xf86InitialConfiguration > after xf86InitialConfiguration > Entering TV Save > Save TV timing tables > saveTimingTables: reading timing tables > TV Save done > disable TV > disable TVDAC > disable FP2 > disable TV > disable TV > init memmap > init common > init crtc1 > init pll1 > freq: 38250000 > best_freq: 38240909 > best_feedback_div: 235 > best_ref_div: 11 > best_post_div: 8 > restore memmap > restore common > restore crtc1 > restore pll1 > finished PLL1 > set RMX > set TV > computeRestarts: def = 696700, h = 0, v = 0, p1=124f, p2=1b22, restart = > 696700 > computeRestarts: F/H/V=0,609,4 > computeRestarts: hSize=0,hInc=1301 > Entering Restore TV > Restore TV PLL > Restore TVHV > Restore TV Restarts > Restore Timing Tables > Restore TV standard > Leaving Restore TV > enable TV > disable FP2 > computeRestarts: def = 696700, h = 0, v = 0, p1=124f, p2=1b22, restart = > 696700 > computeRestarts: F/H/V=0,609,4 > computeRestarts: hSize=0,hInc=1301 > computeRestarts: def = 696700, h = 0, v = 0, p1=124f, p2=1b22, restart = > 696700 > computeRestarts: F/H/V=0,609,4 > computeRestarts: hSize=0,hInc=1301 > computeRestarts: def = 696700, h = 0, v = 0, p1=124f, p2=1b22, restart = > 696700 > computeRestarts: F/H/V=0,609,4 > computeRestarts: hSize=0,hInc=1301 > > I'm using s-video, because it's what seems to work to other people. But I > also tried composite video and I get the same image. > Any hope? > > thanks a lot > Alberto > > _______________________________________________ > xorg-driver-ati mailing list > [email protected] > http://lists.x.org/mailman/listinfo/xorg-driver-ati > > _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
