https://bugs.freedesktop.org/show_bug.cgi?id=28328
--- Comment #26 from Alex Deucher <[email protected]> 2010-06-01 23:56:11 PDT --- (In reply to comment #25) > I pulled out the add-on card, and tried configuring a dual-head setup on the > onboard card. I failed ;) Could you please take a look at > xrandr-verbose.out[1of2] and Xorg.0.log_1of2. When the system turns on or > boots the monitor connected to DVI-1 remains blank. If I boot Embedded XP it > turns the DVI1 output on... Since it's an embedded board, I suspect the i2c lines used for DDC are not connected to anything or they use some hardcoded mapping rather than what is specified in the bios tables which is what causes DDC to fail resulting in the driver not being able to detect any attached monitors. On newer xservers you can force the monitors on by adding the relevent sync ranges and modelines to the monitor sections and setting the enable option in the monitor sections, e.g., Option "Enable" True" -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
