On Sat, Oct 16, 2010 at 3:44 AM, Satz Klauer <[email protected]> wrote: > Hi, > > so is there a chance to get rid of the black strip at the bottom of the TV > screen at least?
Once someone implements the feature. Alex > Mike > On Mon, Oct 11, 2010 at 6:23 PM, Alex Deucher <[email protected]> wrote: >> >> On Mon, Oct 11, 2010 at 3:31 AM, Satz Klauer <[email protected]> >> wrote: >> > Hi, >> > >> > I'm using Fedora 13s radeon driver together with a Radeon HD 4350 that >> > has a >> > TV-out connector which is connected to a PAL TV set. Within my xorg.conf >> > I >> > have set the following additional options but I do not get a real PAL >> > signal >> > with PAL resolution out of the card: >> > Option "VGAAccess" "FALSE" >> > Option "TVDACLoadDetect" "TRUE" >> > Option "ForceTVOut" "TRUE" >> > Option "TVStandard" "pal" >> > Option "DefaultTVDACAdj" "TRUE" >> > Option "ATOMTVOut" "TRUE" >> > >> > Unfortunately the Xorg.log tells me that most these options are not >> > used: >> > [ 1654.824] (WW) RADEON(0): Color tiling is not yet supported on >> > R600/R700 >> > [ 1654.925] (WW) RADEON(0): Option "VGAAccess" is not used >> > [ 1654.925] (WW) RADEON(0): Option "TVDACLoadDetect" is not used >> > [ 1654.925] (WW) RADEON(0): Option "ForceTVOut" is not used >> > [ 1654.925] (WW) RADEON(0): Option "DefaultTVDACAdj" is not used >> > [ 1654.925] (WW) RADEON(0): Option "ATOMTVOut" is not used >> > >> > And what I get out of the TV connector does not seem to be a real PAL >> > signal: >> > - I can't use the correct resolution of 720x576, the X-server starts >> > with >> > 1024x768 when I set this resolution in section "Screen" >> > - I don't get a real overscan picture, when I use a resolution of >> > 800x600 >> > (which is not really PAL) most parts of this screen are visible, >> > overscan >> > does not work >> > - I have a small but ugly black strip on bottom of my screen (with a >> > height >> > of about 10..20 pixels), where no picture is displayed >> > Hacking the display with xvidtune also does not work, it simply does not >> > react to any of my changes. >> > So how can I really get TV out working on this card? >> >> The card always outputs native PAL or NTSC, etc. timing. The "modes" >> provided by xrandr just define the desktop size that is downscaled to >> the native tv timing. Changing the mode doesn't change the timing, >> only, the desktop size and scaling factor. To adjust the tv settings, >> use xrandr, e.g., >> xrandr --output DIN --set "tv standard" pal >> To see all the properties for your connectors, run: >> xrandr --verbose >> >> Adjustable over/underscan support has not been implemented with tv-out >> at the moment. >> >> Alex >> >> > Mike >> > >> > >> > _______________________________________________ >> > xorg-driver-ati mailing list >> > [email protected] >> > http://lists.x.org/mailman/listinfo/xorg-driver-ati >> > >> > > > _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
