https://bugs.freedesktop.org/show_bug.cgi?id=33968
--- Comment #1 from Brian Hall <[email protected]> 2011-02-06 09:18:14 PST --- # get-edid | parse-edid parse-edid: parse-edid version 2.0.0 get-edid: get-edid version 2.0.0 Performing real mode VBE call Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0 Function supported Call successful VBE version 300 VBE string at 0xc01cc "ATI ATOMBIOS" VBE/DDC service about to be called Report DDC capabilities Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0 Function supported Call successful Monitor and video card combination does not support DDC1 transfers Monitor and video card combination supports DDC2 transfers 0 seconds per 128 byte EDID block transfer Screen is not blanked during DDC transfer Reading next EDID block VBE/DDC service about to be called Read EDID Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0 Function supported Call successful parse-edid: EDID checksum passed. # EDID version 1 revision 3 Section "Monitor" # Block type: 2:0 3:fd # Block type: 2:0 3:fc Identifier "X203H" VendorName "ACR" ModelName "X203H" # Block type: 2:0 3:fd HorizSync 31-83 VertRefresh 56-76 # Max dot clock (video bandwidth) 170 MHz # Block type: 2:0 3:fc # Block type: 2:0 3:ff # DPMS capabilities: Active off:no Suspend:yes Standby:yes Mode "1600x900" # vfreq 59.978Hz, hfreq 55.540kHz DotClock 97.750000 HTimings 1600 1648 1680 1760 VTimings 900 903 908 926 Flags "-HSync" "+VSync" EndMode # Block type: 2:0 3:fd # Block type: 2:0 3:fc # Block type: 2:0 3:ff EndSection -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
