https://bugs.freedesktop.org/show_bug.cgi?id=42004
--- Comment #8 from Alex Deucher <[email protected]> 2011-10-20 12:39:28 PDT --- (In reply to comment #6) > Created attachment 52606 [details] [review] > Xorg.log.0 > > In xorg.conf, I added a modeline and a preferred mode to the monitor section > (inspired by edid info): > > # 1368x768 @ 70.00 Hz (GTF) hsync: 56.00 kHz; pclk: 101.70 MHz > Modeline "1368x768_70.00" 101.70 1368 1448 1592 1816 768 769 772 800 > -HSync +Vsync > > And the following options in the device section: > Option "PanelSize" "1368x768" > Option "IgnoreLidStatus" "True" > Option "Enable" "True" # this one is from > http://wiki.debian.org/XStrikeForce/HowToRandR12 > > > Excerpt from attached log: > [ 34912.978] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR > disabled message. > [ 34912.978] (WW) RADEON(0): Option "PanelSize" is not used > [ 34912.978] (WW) RADEON(0): Option "IgnoreLidStatus" is not used > [ 34912.978] (WW) RADEON(0): Option "Enable" is not used > [ 34912.978] (WW) RADEON(0): Option "PreferredMode" is not used > [ 34912.978] (--) RandR disabled Those options are for UMS only. They are not relevant for KMS. You log is from the discrete card which, as I said earlier, is not attached to any displays. You need to start X on the APU to use the displays. You probably is probably related to the DP bridge chips which are not always very reliable at the moment. -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
