On Tue, Nov 1, 2011 at 7:18 AM, Andy Furniss <[email protected]> wrote: > James Cloos wrote: >> >> I grabbed your edid from the hex dump in the log and passed it through >> the update to edit-decode I've been hacking on. It reports: > > Nice, this is far more readable. > > I don't know what's right or wrong, but can see a couple of discrepancies > between this and what is printed in my xorg log. > > Modeline "1440x288"x0.0 and Modeline "1440x240"x0.0 are not shown in CEA. I > don't think I've ever tested these - should get time tonight. > > The interlaced modes > >> Detailed mode: Clock 74.250 MHz, 698 mm x 392 mm >> 1920 2448 2492 2640 hborder 0 >> 540 542 547 562 vborder 0 >> +hsync +vsync interlaced >> Detailed mode: Clock 74.250 MHz, 698 mm x 392 mm >> 1920 2008 2052 2200 hborder 0 >> 540 542 547 562 vborder 0 >> +hsync +vsync interlaced > > show half height, in the log and xrandr they are printed as full height. >
Interlaced HDTV modes tend to treat the height field as field height rather than frame height. Alex _______________________________________________ xorg-driver-ati mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-ati
