info: [drm] Radeon Display Connectors
info: [drm] Connector 0:
info: [drm] VGA-1
info: [drm] DDC: no ddc bus - possible BIOS bug - please report to
[email protected]
info: [drm] Encoders:
info: [drm] CRT2: INTERNAL_KLDSCP_DAC2
info: [drm] Connector 1:
info: [drm] HDMI-A-1
info: [drm] HPD1
info: [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
info: [drm] Encoders:
i don't know is it a error? i don't have a lot of exp with freebsd? (i come
from the windows site...) ;)
best regards
David
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 21:02:49 UTC 2014
[email protected]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Pentium(R) D CPU 3.40GHz (3400.20-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf65 Family = 0xf Model = 0x6 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe49d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4108394496 (3918 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <FSC APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
acpi0: <PTLTD XSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> on acpi0
device_attach: hpet0 attach returned 12
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf008-0xf00b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xe0000000-0xefffffff,0xf0100000-0xf010ffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI RV770 HDA Controller> mem 0xf0110000-0xf0113fff irq 17 at device 0.1 on pci1
hdac1: <Intel 82801G HDA Controller> mem 0xf0000000-0xf0003fff irq 18 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x00a002> mem 0xf0200000-0xf020ffff irq 16 at device 0.0 on pci5
bge0: CHIP ID 0x0000a002; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5755 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:30:05:fa:49:3e
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci7: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x2000-0x201f irq 23 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2400-0x241f irq 22 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2800-0x281f irq 21 at device 29.2 on pci0
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2c00-0x2c1f irq 20 at device 29.3 on pci0
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xf0004000-0xf00043ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib5
pci9: <serial bus, FireWire> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3400-0x340f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0x3430-0x3437,0x3424-0x3427,0x3428-0x342f,0x3420-0x3423,0x3410-0x341f mem 0xf0004400-0xf00047ff irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf1: <ACPI CPU Frequency Control> on cpu1
acpi_perf1: failed in PERF_STATUS attach
device_attach: acpi_perf1 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 112600001126
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_perf1: <ACPI CPU Frequency Control> on cpu1
acpi_perf1: failed in PERF_STATUS attach
device_attach: acpi_perf1 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 112600001126
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC260 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC260 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC260 (Analog 2.0+HP/2.0)> at nid 15,21 and 18,20 on hdaa1
pcm2: <Realtek ALC260 (Rear Digital)> at nid 24 on hdaa1
pcm3: <Realtek ALC260 (Front Analog Mic)> at nid 19 on hdaa1
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen3.1: <Intel> at usbus3
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel> at usbus2
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7170A 1.85> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata0 bus 0 scbus0 target 1 lun 0
cd1: <SAMSUNG DVD-ROM SD-616T F310> Removable CD-ROM SCSI-0 device
cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present
ada0 at ata2 bus 0 scbus1 target 0 lun 0
ada0: <ST3808110AS PN 3.BUC> ATA-7 SATA 1.x device
ada0: Serial Number 9LR2TJ8X
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 78167MB (160086528 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ata2 bus 0 scbus1 target 1 lun 0
ada1: <ST3808110AS PN 3.BUC> ATA-7 SATA 1.x device
ada1: Serial Number 5LRDSX7L
ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada1: 78167MB (160086528 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad5
ada2 at ata3 bus 0 scbus2 target 0 lun 0
ada2: <SAMSUNG HD322HJ 1AC01110> ATA-7 SATA 2.x device
ada2: Serial Number S17AJ9AQ413671
ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada2: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad6
ada3 at ata3 bus 0 scbus2 target 1 lun 0
ada3: <ST3750640AS Q 3.BTG> ATA-7 SATA 2.x device
ada3: Serial Number 3QD0S6DH
ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada3: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad7
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1700098132 Hz quality 1000
GEOM_MIRROR: Cancelling unmapped because of ada1p1.
GEOM_MIRROR: Cancelling unmapped because of ada0p1.
GEOM_MIRROR: Device mirror/boot launched (2/2).
GEOM_MIRROR: Cancelling unmapped because of ada1p2.
GEOM_MIRROR: Cancelling unmapped because of ada0p2.
GEOM_MIRROR: Device mirror/swap launched (2/2).
GEOM_MIRROR: Cancelling unmapped because of ada1p3.
GEOM_MIRROR: Cancelling unmapped because of ada0p3.
GEOM_MIRROR: Device mirror/root launched (1/2).
GEOM_MIRROR: Device root: rebuilding provider ada0p3.
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/mirror/root [rw]...
WARNING: / was not properly dismounted
ugen2.2: <Logitech> at usbus2
WARNING: / was not properly dismounted
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/54.00, addr 2> on usbus2
ums0: 8 buttons and [XYZT] coordinates ID=0
bge0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...103 1 1 1 1 1 1 1 1 0 0 done
All buffers synced.
Uptime: 18m47s
GEOM_MIRROR: Device root: rebuilding provider ada0p3 stopped.
GEOM_MIRROR: Device swap: provider mirror/swap destroyed.
GEOM_MIRROR: Device root: provider mirror/root destroyed.
GEOM_MIRROR: Device swap destroyed.
GEOM_MIRROR: Device root destroyed.
GEOM_MIRROR: Device boot: provider mirror/boot destroyed.
GEOM_MIRROR: Device boot destroyed.
Rebooting...
cpu_reset: Stopping other CPUs
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 21:02:49 UTC 2014
[email protected]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Pentium(R) D CPU 3.40GHz (3400.19-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf65 Family = 0xf Model = 0x6 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe49d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4108394496 (3918 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <FSC APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
acpi0: <PTLTD XSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> on acpi0
device_attach: hpet0 attach returned 12
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf008-0xf00b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xe0000000-0xefffffff,0xf0100000-0xf010ffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI RV770 HDA Controller> mem 0xf0110000-0xf0113fff irq 17 at device 0.1 on pci1
hdac1: <Intel 82801G HDA Controller> mem 0xf0000000-0xf0003fff irq 18 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x00a002> mem 0xf0200000-0xf020ffff irq 16 at device 0.0 on pci5
bge0: CHIP ID 0x0000a002; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5755 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:30:05:fa:49:3e
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci7: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x2000-0x201f irq 23 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2400-0x241f irq 22 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2800-0x281f irq 21 at device 29.2 on pci0
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2c00-0x2c1f irq 20 at device 29.3 on pci0
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xf0004000-0xf00043ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib5
pci9: <serial bus, FireWire> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3400-0x340f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0x3430-0x3437,0x3424-0x3427,0x3428-0x342f,0x3420-0x3423,0x3410-0x341f mem 0xf0004400-0xf00047ff irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf1: <ACPI CPU Frequency Control> on cpu1
acpi_perf1: failed in PERF_STATUS attach
device_attach: acpi_perf1 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 112600001126
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_perf1: <ACPI CPU Frequency Control> on cpu1
acpi_perf1: failed in PERF_STATUS attach
device_attach: acpi_perf1 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 112600001126
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC260 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC260 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC260 (Analog 2.0+HP/2.0)> at nid 15,21 and 18,20 on hdaa1
pcm2: <Realtek ALC260 (Rear Digital)> at nid 24 on hdaa1
pcm3: <Realtek ALC260 (Front Analog Mic)> at nid 19 on hdaa1
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen3.1: <Intel> at usbus3
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel> at usbus2
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7170A 1.85> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata0 bus 0 scbus0 target 1 lun 0
cd1: <SAMSUNG DVD-ROM SD-616T F310> Removable CD-ROM SCSI-0 device
cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present
ada0 at ata2 bus 0 scbus1 target 0 lun 0
ada0: <ST3808110AS PN 3.BUC> ATA-7 SATA 1.x device
ada0: Serial Number 9LR2TJ8X
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 78167MB (160086528 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ata2 bus 0 scbus1 target 1 lun 0
ada1: <ST3808110AS PN 3.BUC> ATA-7 SATA 1.x device
ada1: Serial Number 5LRDSX7L
ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada1: 78167MB (160086528 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad5
ada2 at ata3 bus 0 scbus2 target 0 lun 0
ada2: <SAMSUNG HD322HJ 1AC01110> ATA-7 SATA 2.x device
ada2: Serial Number S17AJ9AQ413671
ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada2: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad6
ada3 at ata3 bus 0 scbus2 target 1 lun 0
ada3: <ST3750640AS Q 3.BTG> ATA-7 SATA 2.x device
ada3: Serial Number 3QD0S6DH
ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada3: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad7
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1700096449 Hz quality 1000
GEOM_MIRROR: Cancelling unmapped because of ada1p1.
GEOM_MIRROR: Cancelling unmapped because of ada0p1.
GEOM_MIRROR: Device mirror/boot launched (2/2).
GEOM_MIRROR: Cancelling unmapped because of ada1p2.
GEOM_MIRROR: Cancelling unmapped because of ada0p2.
GEOM_MIRROR: Device mirror/swap launched (2/2).
GEOM_MIRROR: Cancelling unmapped because of ada1p3.
GEOM_MIRROR: Cancelling unmapped because of ada0p3.
GEOM_MIRROR: Device mirror/root launched (1/2).
GEOM_MIRROR: Device root: rebuilding provider ada0p3.
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/mirror/root [rw]...
WARNING: / was not properly dismounted
ugen2.2: <Logitech> at usbus2
WARNING: / was not properly dismounted
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/54.00, addr 2> on usbus2
ums0: 8 buttons and [XYZT] coordinates ID=0
bge0: link state changed to UP
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <ATI Radeon 4800 Series> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (RV770 0x1002:0x9440 0x1043:0x0378).
info: [drm] register mmio base: 0xF0100000
info: [drm] register mmio size: 65536
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=9440
info: [drm] radeon_atrm_get_bios: Get ACPI device handle
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xe0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800e0000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x2070
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes)
info: [drm] ATOM BIOS:
drmn0: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
drmn0: info: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
info: [drm] Detected VRAM RAM=1024M, BAR=256M
info: [drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 2083856 kiB
[TTM] Initializing pool allocator
info: [drm] radeon: 1024M of VRAM memory ready
info: [drm] radeon: 512M of GTT memory ready.
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] radeon: irq initialized.
info: [drm] GART: num cpu pages 131072, num gpu pages 131072
info: [drm] probing gen 2 caps for device 8086:277d = 1/0
info: [drm] Loading RV770 Microcode
info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
drmn0: info: WB enabled
drmn0: info: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff8008d179c00
drmn0: info: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff8008d179c0c
info: [drm] ring test on 0 succeeded in 1 usecs
info: [drm] ring test on 3 succeeded in 1 usecs
info: [drm] ib test on ring 0 succeeded in 0 usecs
info: [drm] ib test on ring 3 succeeded in 0 usecs
info: [drm] radeon_device_init: Taking over the fictitious range 0xe0000000-0xf0000000
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb1 addr 0x0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb2 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on iicbb3 addr 0x0
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb4 addr 0x0
iic4: <I2C generic I/O> on iicbus4
info: [drm] Radeon Display Connectors
info: [drm] Connector 0:
info: [drm] VGA-1
info: [drm] DDC: no ddc bus - possible BIOS bug - please report to [email protected]
info: [drm] Encoders:
info: [drm] CRT2: INTERNAL_KLDSCP_DAC2
info: [drm] Connector 1:
info: [drm] HDMI-A-1
info: [drm] HPD1
info: [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
info: [drm] Encoders:
info: [drm] DFP1: INTERNAL_UNIPHY
info: [drm] Connector 2:
info: [drm] DVI-I-1
info: [drm] HPD2
info: [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
info: [drm] Encoders:
info: [drm] CRT1: INTERNAL_KLDSCP_DAC1
info: [drm] DFP2: INTERNAL_KLDSCP_LVTMA
info: [drm] Internal thermal controller with fan control
info: [drm] radeon: power management initialized
info: [drm] fb mappable at 0xE0142000
info: [drm] vram apper at 0xE0000000
info: [drm] size 8294400
info: [drm] fb depth is 24
info: [drm] pitch is 7680
fbd0 on drmn0
info: [drm] Initialized radeon 2.29.0 20080528
ugen4.2: <Kingston> at usbus4
umass0: <Kingston DataTraveler 3.0, class 0/0, rev 2.10/1.00, addr 2> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:3:0:-1: Attached to scbus3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Kingston DataTraveler 3.0 PMAP> Removable Direct Access SCSI-6 device
da0: Serial Number 00190F0C0295BE3119986338
da0: 40.000MB/s transfers
da0: 15004MB (30728832 512 byte sectors: 255H 63S/T 1912C)
da0: quirks=0x2<NO_6_BYTE>
GEOM_MIRROR: Device root: rebuilding provider ada0p3 finished.
ugen4.2: <Kingston> at usbus4 (disconnected)
umass0: at uhub4, port 1, addr 2 (disconnected)
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Kingston DataTraveler 3.0 PMAP> s/n 00190F0C0295BE3119986338 detached
(da0:umass-sim0:0:0:0): Periph destroyed
ugen4.2: <Corsair> at usbus4
umass0: <Corsair Slider 3.0, class 0/0, rev 2.10/0.00, addr 2> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:3:0:-1: Attached to scbus3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Corsair Slider 3.0 1.00> Removable Direct Access SCSI-4 device
da0: Serial Number 22091404110000030031
da0: 40.000MB/s transfers
da0: 15300MB (31334400 512 byte sectors: 255H 63S/T 1950C)
da0: quirks=0x2<NO_6_BYTE>
ugen4.2: <Corsair> at usbus4 (disconnected)
umass0: at uhub4, port 2, addr 2 (disconnected)
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Corsair Slider 3.0 1.00> s/n 22091404110000030031 detached
(da0:umass-sim0:0:0:0): Periph destroyed
_______________________________________________
xorg-driver-ati mailing list
[email protected]
http://lists.x.org/mailman/listinfo/xorg-driver-ati
