On 05/08/08 12:50 -0400, Gideon Romm wrote: > Just reporting: > > On Geode GX2 units with CS5535 companion board, the geode driver breaks > with: > > "Could not find the GPIO I/O base" > > Inspection of the code reveals that this is because the CS5536 GPIO > registers are hard coded in geode_ddc.c. On a CS5535-based unit, this > causes the complete system to hang. The "amd" driver previously and the > current "nsc" driver do not have this issue. > > I wonder why it was necessary to introduce the hard code for the CS5536. > Also, I do not see any xorg.conf flag or option to disable the DDC probing. > I think disabling the DDC probe for now, would allow me to use the geode > driver on this board.
Please confirm that this commit solves the problem: http://gitweb.freedesktop.org/?p=xorg/driver/xf86-video-geode.git;a=commit;h=316e89aa58f4d7f3cb4513a6decb035e99abc7d6 Jordan -- Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc. _______________________________________________ Xorg-driver-geode mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-geode
