On Thursday 12 February 2009 17:07:08 Mart Raudsepp wrote:
> Hello,
>
> As I don't see answers from others, I can mostly only suggest trying a
> newer geode driver and xorg-server, as I don't have experience with the
> older ones.
>
> However, the log says that it finds a [email protected], and I don't see
> it rejecting it. Maybe it just doesn't pick it as default without
> manually (or through desktop environment) instructing different but it's
> available for runtime changing? A newer driver version might behave
> different in that regard.
> What does the "xrandr" output tell? From the log I can see that the
> virtual framebuffer size is 1920x1080, so 1360x768 should fit fine in
> there.
> Perhaps xrandr lists 1360x768 still but as non-default right now?
>
> Do you have a visible wrong resolution picture working or can run it
> remotely over ssh or some such with DISPLAY=:0 xrandr?
>
>
> Regards,
> Mart Raudsepp
>
Hi Mart,
we have started now the system with a Xubuntu live and have switched the
resolution with the xrandr command to 1360x768.
I have attached the xorg.conf and Xorg.0.log from the test. As you can see on
the "screenshot" ( http://sigma.cte.lu/~goebelch/PICT0062.JPG ) the display is
working but is distorted.
X11 thinks the resolution is 1360x768 but the screen displays 1360x'+/-600'...
--
Christian Goebel
_______________________________________________
Centre de Technologie de l'Education
29 avenue John F. Kennedy
L-1855 Luxembourg-Kirchberg
tél.: +352 247-85975
fax: +352 333797
_______________________________________________
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux ubuntu 2.6.27-7-generic #1 SMP Fri Oct 24 06:42:44 UTC 2008 i586
Build Date: 24 October 2008 08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 ([email protected])
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 13 08:26:37 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0...@0:1:1) Advanced Micro Devices [AMD] Geode LX Video rev 0, Mem @ 0xe8000000/0, 0xefff0000/0, 0xeffec000/0, 0xeffe8000/0, 0xefff8000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched geode from file name geode.ids
(==) Matched geode for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "geode"
(II) Loading /usr/lib/xorg/modules/drivers//geode_drv.so
(II) Module geode: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 2.10.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX
(II) Primary Device is: PCI 0...@00:01:1
AmdPciProbe: Probing for supported devices!
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) GEODE(0): AmdPciProbe: CPUDetected 32!
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(WW) System lacks support for changing MTRRs
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
Unable to open /dev/cpu/0/msr: 2
(II) GEODE(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 16/16
(==) GEODE(0): Depth 16, (==) framebuffer bpp 16
(==) GEODE(0): RGB weight 565
(==) GEODE(0): Default visual is TrueColor
(==) GEODE(0): Using gamma correction (1.0, 1.0, 1.0)
(==) GEODE(0): No DCON is present
(II) GEODE(0): LX output options:
(II) GEODE(0): CRT: YES
(II) GEODE(0): PANEL: NO
(II) GEODE(0): DCON: NO
(II) GEODE(0): VGA: YES
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) GEODE(0): Primary V_BIOS segment is: 0xc000
(II) GEODE(0): I2C bus "CS5536 DDC BUS" initialized.
(II) GEODE(0): I2C device "CS5536 DDC BUS:ddc2" registered at address 0xA0.
(II) GEODE(0): I2C bus "CS5536 DDC BUS" removed.
(II) GEODE(0): Manufacturer: SAM Model: 434 Serial#: 1296511794
(II) GEODE(0): Year: 2008 Week: 46
(II) GEODE(0): EDID Version: 1.3
(II) GEODE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) GEODE(0): Sync: Separate Composite SyncOnGreen
(II) GEODE(0): Max Image Size [cm]: horiz.: 70 vert.: 39
(II) GEODE(0): Gamma: 2.20
(II) GEODE(0): DPMS capabilities: Off; RGB/Color Display
(II) GEODE(0): First detailed timing is preferred mode
(II) GEODE(0): redX: 0.640 redY: 0.330 greenX: 0.280 greenY: 0.600
(II) GEODE(0): blueX: 0.150 blueY: 0.060 whiteX: 0.280 whiteY: 0.290
(II) GEODE(0): Supported VESA Video Modes:
(II) GEODE(0): 720x...@70hz
(II) GEODE(0): 640x...@60hz
(II) GEODE(0): 640x...@67hz
(II) GEODE(0): 640x...@72hz
(II) GEODE(0): 640x...@75hz
(II) GEODE(0): 800x...@56hz
(II) GEODE(0): 800x...@60hz
(II) GEODE(0): 800x...@72hz
(II) GEODE(0): 800x...@75hz
(II) GEODE(0): 832x...@75hz
(II) GEODE(0): 1024x...@60hz
(II) GEODE(0): 1024x...@70hz
(II) GEODE(0): 1024x...@75hz
(II) GEODE(0): 1280x1...@75hz
(II) GEODE(0): 1152x...@75hz
(II) GEODE(0): Manufacturer's mask: 0
(II) GEODE(0): Supported Future Video Modes:
(II) GEODE(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) GEODE(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) GEODE(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) GEODE(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) GEODE(0): Supported additional Video Mode:
(II) GEODE(0): clock: 85.5 MHz Image Size: 697 x 392 mm
(II) GEODE(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
(II) GEODE(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
(II) GEODE(0): Supported additional Video Mode:
(II) GEODE(0): clock: 138.5 MHz Image Size: 697 x 392 mm
(II) GEODE(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) GEODE(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) GEODE(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz
(II) GEODE(0): Monitor name: SyncMaster
(II) GEODE(0): EDID (in hex):
(II) GEODE(0): 00ffffffffffff004c2d34043233474d
(II) GEODE(0): 2e1201030e4627782aee9da354479926
(II) GEODE(0): 0f474abfef80a94081808140714f0101
(II) GEODE(0): 010101010101662150b051001b304070
(II) GEODE(0): 3600b9882100001e1a3680a070381f40
(II) GEODE(0): 30203500b9882100001a000000fd0038
(II) GEODE(0): 4b1e5111000a202020202020000000fc
(II) GEODE(0): 0053796e634d61737465720a20200018
(II) GEODE(0): EDID vendor "SAM", prod id 1076
(II) GEODE(0): Using EDID range info for horizontal sync
(II) GEODE(0): Using EDID range info for vertical refresh
(II) GEODE(0): Printing DDC gathered Modelines:
(II) GEODE(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
(II) GEODE(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz)
(II) GEODE(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) GEODE(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) GEODE(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) GEODE(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) GEODE(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) GEODE(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) GEODE(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) GEODE(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) GEODE(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) GEODE(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) GEODE(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) GEODE(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) GEODE(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) GEODE(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) GEODE(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) GEODE(0): Modeline "1600x1200"x60.0 160.96 1600 1704 1880 2160 1200 1201 1204 1242 -hsync +vsync (74.5 kHz)
(II) GEODE(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) GEODE(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz)
(II) GEODE(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz)
(II) GEODE(0): Configured Monitor: Using hsync range of 30.00-81.00 kHz
(II) GEODE(0): Configured Monitor: Using vrefresh range of 56.00-75.00 Hz
(II) GEODE(0): Configured Monitor: Using maximum pixel clock of 170.00 MHz
(II) GEODE(0): Estimated virtual size for aspect ratio 1.7949 is 1920x1080
(II) GEODE(0): Clock range: 25.18 to 229.50 MHz
(II) GEODE(0): Not using default mode "640x350" (unknown reason)
(II) GEODE(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x400" (unknown reason)
(II) GEODE(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "720x400" (unknown reason)
(II) GEODE(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x480" (unknown reason)
(II) GEODE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x480" (vrefresh out of range)
(II) GEODE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "800x600" (vrefresh out of range)
(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (unknown reason)
(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (vrefresh out of range)
(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x960" (unknown reason)
(II) GEODE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x960" (unknown reason)
(II) GEODE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) GEODE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) GEODE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) GEODE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) GEODE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) GEODE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) GEODE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "832x624" (unknown reason)
(II) GEODE(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (vrefresh out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (vrefresh out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1360x768" (unknown reason)
(II) GEODE(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1360x768" (unknown reason)
(II) GEODE(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (unknown reason)
(II) GEODE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (unknown reason)
(II) GEODE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (unknown reason)
(II) GEODE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (unknown reason)
(II) GEODE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1440x900" (unknown reason)
(II) GEODE(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1024" (unknown reason)
(II) GEODE(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1080" (unknown reason)
(II) GEODE(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1200" (height too large for virtual size)
(II) GEODE(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) GEODE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) GEODE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) GEODE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) GEODE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GEODE(0): Not using driver mode "1600x1200" (height too large for virtual size)
(--) GEODE(0): Virtual size is 1920x1080 (pitch 1920)
(**) GEODE(0): *Driver mode "1920x1080": 138.5 MHz, 66.6 kHz, 59.9 Hz
(II) GEODE(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz)
(**) GEODE(0): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) GEODE(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) GEODE(0): *Driver mode "1280x1024": 108.9 MHz, 63.6 kHz, 60.0 Hz
(II) GEODE(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(**) GEODE(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) GEODE(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) GEODE(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) GEODE(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) GEODE(0): *Driver mode "1280x960": 102.1 MHz, 59.6 kHz, 60.0 Hz
(II) GEODE(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz)
(**) GEODE(0): *Driver mode "1360x768": 85.5 MHz, 47.7 kHz, 60.0 Hz
(II) GEODE(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
(**) GEODE(0): *Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) GEODE(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(**) GEODE(0): *Driver mode "1152x864": 105.0 MHz, 67.7 kHz, 75.0 Hz
(II) GEODE(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz)
(**) GEODE(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) GEODE(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(**) GEODE(0): *Default mode "1152x864": 105.0 MHz, 67.6 kHz, 75.0 Hz
(II) GEODE(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.6 kHz)
(**) GEODE(0): *Default mode "1152x864": 96.8 MHz, 63.0 kHz, 70.0 Hz
(II) GEODE(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz)
(**) GEODE(0): *Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
(II) GEODE(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
(**) GEODE(0): *Driver mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) GEODE(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(**) GEODE(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) GEODE(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(**) GEODE(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) GEODE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) GEODE(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) GEODE(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(**) GEODE(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) GEODE(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(**) GEODE(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) GEODE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) GEODE(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) GEODE(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(**) GEODE(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) GEODE(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) GEODE(0): *Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) GEODE(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) GEODE(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) GEODE(0): *Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) GEODE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) GEODE(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) GEODE(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) GEODE(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) GEODE(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) GEODE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) GEODE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) GEODE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) GEODE(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) GEODE(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) GEODE(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) GEODE(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(**) GEODE(0): *Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
(II) GEODE(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(**) GEODE(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) GEODE(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) GEODE(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) GEODE(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) GEODE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) GEODE(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) GEODE(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(**) GEODE(0): Display dimensions: (700, 390) mm
(**) GEODE(0): DPI set to (69, 70)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) GEODE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) GEODE(0): Geode LX video memory 1e00000 bytes at 0xb5983000
(II) EXA(0): Offscreen pixmap area of 25134336 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) GEODE(0): Backing store disabled
(II) GEODE(0): DPMS enabled
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.99
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device Logitech USB Optical Mouse
(**) Logitech USB Optical Mouse: always reports core events
(**) Logitech USB Optical Mouse: Device: "/dev/input/event2"
(II) Logitech USB Optical Mouse: Found x and y relative axes
(II) Logitech USB Optical Mouse: Found 3 mouse buttons
(II) Logitech USB Optical Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
(**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device CHICONY HP Basic USB Keyboard
(**) CHICONY HP Basic USB Keyboard: always reports core events
(**) CHICONY HP Basic USB Keyboard: Device: "/dev/input/event1"
(II) CHICONY HP Basic USB Keyboard: Found keys
(II) CHICONY HP Basic USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) CHICONY HP Basic USB Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) CHICONY HP Basic USB Keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) CHICONY HP Basic USB Keyboard: xkb_layout: "us"
invalid filter 1
invalid filter 1
_______________________________________________
Xorg-driver-geode mailing list
[email protected]
http://lists.x.org/mailman/listinfo/xorg-driver-geode
