On Fri, Jun 18, 2010 at 5:40 PM, Cui, Hunk <[email protected]> wrote: > > In yesterday's update note, there is one place with connection to X server > lost. I changed it and resend a new one to review. > To repeatedly cycle test, I have written a shell-script to test the rotate. > Now it can properly rotate in Xserver 1.8 (Need add my gamma correction > patch). > Because I have some confuse on memorysize, so I need some time to research > and consider whether this approach is correct. I can not explain too > specific. But it can solve your urgent rotate issue in temporary. > Any other latest update, I will inform.
Hi Hunk, Thanks for the patch. I have tried it out with Xorg server 1.7.5, but it doesn't work. $ xrandr -q | grep connected default connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm So I will use "default". $ xrandr --output default --rotate left xrandr: Configure crtc 0 failed The screen goes black for a moment, then comes back just as before, i.e., not inverted. This happens for "left", "right", and "inverted". There is no flash for "normal", and it returns immediately. This is the same with the add/subtract lx_crtc->rotate_mem->size, and with the add/subtract 1. This message appears in the X log: (EE) GEODE(0): Couldn't allocate the shadow memory for rotation (EE) GEODE(0): You need 0x300000 bytes, but only 0x0 bytes are available Is this because I am using Xorg server 1.7.5? Do you think it would work with 1.8? Is there something I'm doing wrong? I will try 1.8 now. Thank you for your help! Mitch. _______________________________________________ Xorg-driver-geode mailing list [email protected] http://lists.x.org/mailman/listinfo/xorg-driver-geode
