Hi all, I have a motherboard with an intel G45 chipset. When I try to launch an X server with no connected monitor it fails with (other outputs are ignored according to my xorg.conf) :
(II) intel(0): Output HDMI-2 using monitor section Sharp Aquos (**) intel(0): Option "PreferredMode" "1080p" (**) intel(0): Option "Enable" "true" (II) intel(0): I2C bus "HDMIDDC_C" initialized. (II) intel(0): HDMI output 2 detected (II) intel(0): EDID for output HDMI-2 (II) intel(0): Output HDMI-2 enabled by config file (WW) intel(0): Unable to find initial modes (EE) intel(0): Output HDMI-2 enabled but has no modes (EE) intel(0): No valid modes. I have read how to setup dual head at http://intellinuxgraphics.org/dualhead.html and my xorg.conf relevant sections look like this : Section "Device" Identifier "Intel GMA X4500HD" Driver "intel" BusID "PCI:0:2:0" VendorName "Intel" BoardName "G45 [Intel GMA X4500HD]" Option "AccelMethod" "EXA" Option "ModeDebug" "true" Option "monitor-VGA" "ignore" Option "monitor-HDMI-1" "ignore" Option "monitor-HDMI-2" "Sharp Aquos" EndSection Section "Monitor" Identifier "ignore" Option "ignore" "true" EndSection Section "Monitor" Identifier "Sharp Aquos" ModeLine "1080p" 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync VertRefresh 23-61 HorizSync 15-68 Option "PreferredMode" "1080p" Option "enable" "true" EndSection Is there a way to force the driver to use the 1080p mode even when no monitor are connected? thanks in advance. regards, strawks _______________________________________________ xorg mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/xorg
