On Tuesday, January 6, 2009 5:41 pm Mike Lothian wrote: > 2009/1/7 Mike Lothian <m...@fireburn.co.uk>: > > 2009/1/7 Jesse Barnes <jbar...@virtuousgeek.org>: > >> On Tuesday, January 6, 2009 3:53 pm Mike Lothian wrote: > >>> 2009/1/6 Jesse Barnes <jbar...@virtuousgeek.org>: > >>> > On Tuesday, January 6, 2009 2:35 pm Mike Lothian wrote: > >>> >> Hi there > >>> >> > >>> >> Thought I'd send in some info about Xorg with a KMS kernel, libdrm > >>> >> and xf86-video-intel > >>> >> > >>> >> I've attached my dmesg and Xorg.0.log > >>> >> > >>> >> The only outputs are LVDS 15" screen an a disconnected VGA out and > >>> >> HDMI connectors > >>> >> > >>> >> I'll quite happily submit a bug but thought the code was a little > >>> >> too new to harp on about especially if this is a known issue > >>> >> > >>> >> Let me know if I can help further > >>> > > >>> > Looks like the 3D driver init failed... Maybe you need to rebuild > >>> > your DRI driver as well against the same libdrm? > >>> > >>> I rebuild libdrm mesa and xf86-video-intel each time is there > >>> something else I'm missing? > >> > >> This one looks like a Mesa mismatch somehow, so try rebuilding that too. > >> > >> -- > >> Jesse Barnes, Intel Open Source Technology Center > > > > OK I've recompiled libdrm mesa and xf86-video-intel using their master > > tree's and recompiled the head drm-intel-next branch of the kernel the > > versions I were using before were only a few hours old > > > > Good news X starts, bad news is the screen goes black once KDE starts > > to load, pretty sure it's when the compositing is started > > > > Another strange things happened, normally with KMS all my VTs are at > > the laptops native resolution now they're in the top left corner at > > what looks like 800x600 but not streched > > > > Also when booting from a non-KMS but regular GEM kernel UXA doesn't > > work now. I've had to switch back to EXA > > > > I'm attaching my dmesg and Xorg log from the KMS retry > > > > Could any of the problems be caused by: > > > > [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for > > disabled pipe 0 > > > > > > Cheers > > > > Mike > > Oh yes and when X started is went back to the native resolution
The "800x600 but not stretched" issue sounds like it could be related to the initial_config bug I fixed this week. Can you give Dave's latest drm-next tree a try? It fixes that bug (among others). Also the 2D driver needs a few fixes we're still working on. The intel-...@lists.freedesktop.org is a good place to watch for those. -- Jesse Barnes, Intel Open Source Technology Center _______________________________________________ xorg mailing list xorg@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/xorg