Op 04-11-09 05:49, Peter Hutterer schreef:
> Other than that, I'm happy with the patch. Eric - have you managed to test
> this patch yet?
Hello,
This is an update on the status of my testing. Now my laptop is enjoying
xserver 1.7.1, with evdev 1.3.0. Finally, after some lots of
suspends/resumes I've managed to reproduce reliably the bug again (by
restarting the hal deamon before suspending).
I can now confirm that Dmitry's patch is effective, and prevents the bug
from happening :-)
See you,
Eric
X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: Linux_2.6.22.12-server-1mdv Mandriva
Current Operating System: Linux dutifh 2.6.32-rc6-git-eric-00029-g28d85d6 #28
SMP PREEMPT Thu Nov 5 15:23:22 CET 2009 x86_64
Kernel command line: BOOT_IMAGE=2632-rc6-git-eric-00029-g28d85d
root=UUID=01dc5fcc-55d3-4bae-932b-1119dbe7ff0b
resume=UUID=0d777318-dc2d-4ec3-aa25-fbad7e0fa039 splash=silent 3
Build Date: 10 November 2009 06:13:24PM
Current version of pixman: 0.16.2
Before reporting problems, check http://qa.mandriva.com
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 11 23:54:14 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitorLVDS"
(**) | |-->Device "device1"
(**) Option "AllowMouseOpenFail"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d
(**) ModulePath set to
"/usr/lib64/dri/,/usr/lib64/xorg/modules/drivers/,/usr/lib64/xorg/modules/"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable
AllowEmptyInput.
(II) Loader magic: 0x7c5880
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a02:103c:30c9 Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller rev 12, Mem @ 0xe0400000/1048576,
0xd0000000/268435456, I/O @ 0x00002000/8
(--) PCI: (0:0:2:1) 8086:2a03:103c:30c9 Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller rev 12, Mem @ 0xe0500000/1048576
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension Multi-Buffering
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 0...@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(II) intel(0): Output VGA1 using monitor section monitorLVDS
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface
/sys/class/backlight/acpi_video0
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "monitor-LVDS" is not used
(WW) intel(0): Option "monitor-VGA" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib64/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us(alt-intl)"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device HP WMI hotkeys
(**) HP WMI hotkeys: always reports core events
(**) HP WMI hotkeys: Device: "/dev/input/event10"
(II) HP WMI hotkeys: Found keys
(II) HP WMI hotkeys: Configuring as keyboard
(II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us(alt-intl)"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event0"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us(alt-intl)"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event3"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us(alt-intl)"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us(alt-intl)"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.2.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.0
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type:
TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event7"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found relative axes
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) HP WMI hotkeys: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) HP WMI hotkeys: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(II) intel(0): Allocate new frame buffer 800x1280 stride 896
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(II) intel(0): Allocate new frame buffer 800x1280 stride 896
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) HP WMI hotkeys: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(II) intel(0): Allocate new frame buffer 800x1280 stride 896
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) config/hal: Adding input device W595
(**) W595: always reports core events
(**) W595: Device: "/dev/input/event11"
(II) W595: Found 3 mouse buttons
(II) W595: Found relative axes
(II) W595: Found x and y relative axes
(II) W595: Found keys
(II) W595: Configuring as mouse
(II) W595: Configuring as keyboard
(**) W595: YAxisMapping: buttons 4 and 5
(**) W595: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout:
200
(II) XINPUT: Adding extended input device "W595" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us(alt-intl)"
(**) Option "xkb_options" "compose:rwin"
(**) W595: (accel) keeping acceleration scheme 1
(**) W595: (accel) acceleration profile 0
(II) W595: initialized for relative axes.
(II) config/hal: removing device W595
(II) W595: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device W595
(**) W595: always reports core events
(**) W595: Device: "/dev/input/event11"
(II) W595: Found 3 mouse buttons
(II) W595: Found relative axes
(II) W595: Found x and y relative axes
(II) W595: Found keys
(II) W595: Configuring as mouse
(II) W595: Configuring as keyboard
(**) W595: YAxisMapping: buttons 4 and 5
(**) W595: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout:
200
(II) XINPUT: Adding extended input device "W595" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us(alt-intl)"
(**) Option "xkb_options" "compose:rwin"
(**) W595: (accel) keeping acceleration scheme 1
(**) W595: (accel) acceleration profile 0
(II) W595: initialized for relative axes.
(II) config/hal: removing device W595
(II) W595: Close
(II) UnloadModule: "evdev"
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) HP WMI hotkeys: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) HP WMI hotkeys: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(WW) config/hal: device AT Translated Set 2 keyboard already added. Ignoring.
(WW) config/hal: device HP WMI hotkeys already added. Ignoring.
(WW) config/hal: device Sleep Button already added. Ignoring.
(WW) config/hal: device Video Bus already added. Ignoring.
(WW) config/hal: device Power Button already added. Ignoring.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "CMO", prod id 4641
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.39 1280 1320 1346 1412 800 802
807 819 -hsync -vsync (49.1 kHz)
(--) SynPS/2 Synaptics TouchPad: touchpad found
(EE) AT Translated Set 2 keyboard: device key_bitmask has changed
(EE) AT Translated Set 2 keyboard: Device has changed - disabling.
(II) HP WMI hotkeys: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) config/hal: removing device AT Translated Set 2 keyboard
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us(alt-intl)"
(**) Option "xkb_options" "compose:rwin"
_______________________________________________
xorg mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/xorg
