Peter Hutterer wrote: >> Not sure if this is the same, but I tried using an xorg.conf file >> (instead of default: no file): >> >> Section "InputDevice" >> Identifier "Generic Keyboard" >> Driver "kbd" >> Option "XkbRules" "xorg" >> Option "XkbModel" "pc105" >> Option "XkbLayout" "de" >> Option "XkbVariant" "nodeadkeys" >> Option "XkbOptions" "lv3:ralt_switch" >> EndSection >> >> Section "InputDevice" >> Identifier "Configured Mouse" >> Driver "mouse" >> Option "CorePointer" >> Option "Buttons" "3" >> EndSection > > Since 1.5 or so keyboard and mouse xorg.conf sections are ignored when you > have hotplugging enabled to avoid duplicate devices. so this config has no > effect. > > Please try adding Option "AutoAddDevices" "off" to your server layout > section. this disables hotplugging and forces the server to use a > different driver. If that driver works, we can at least narrow down what's > going on here because the log looks normal. > > > Cheers, > Peter
Thanks Peter. I added the Option and now I have no keyboard and no mouse. Looking at the Xorg.0.log this seems to be explained in these lines: (II) LoadModule: "mouse" (WW) Warning, couldn't open module mouse (II) UnloadModule: "mouse" (EE) Failed to load module "mouse" (module does not exist, 0) (EE) No input driver matching `mouse' (II) LoadModule: "kbd" (WW) Warning, couldn't open module kbd (II) UnloadModule: "kbd" (EE) Failed to load module "kbd" (module does not exist, 0) (EE) No input driver matching `kbd' Now, either the driver names have changed or I have a problem in my installation. Full xorg.log is attached. Thanks Michael
X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.26-2-amd64 i686 Debian Current Operating System: Linux NetbookMB 2.6.34-0.slh.11-sidux-686 #1 SMP PREEMPT Sat Jun 26 15:05:51 UTC 2010 i686 Kernel command line: root=LABEL=Linux-System ro lang=de audit=1 enforcing=0 resume=LABEL=Swap vga=0 quiet selinux=0 Build Date: 15 July 2010 04:10:53PM xorg-server 2:1.7.7-3 (Cyril Brulebois <k...@debian.org>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 10 07:59:00 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (**) | |-->Device "Configured Video Device" (**) |-->Input Device "Synaptics Touchpad" (**) Option "AutoAddDevices" "off" (**) Not automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. Entry deleted from font path. (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (==) |-->Input Device "Configured Mouse" (==) |-->Input Device "Generic Keyboard" (==) The core pointer device wasn't specified explicitly in the layout. Using the first core pointer device. (==) The core keyboard device wasn't specified explicitly in the layout. Using the first keyboard device. (II) Loader magic: 0x81eaca0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:27ae:1462:0110 Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xdfe80000/524288, 0xc0000000/268435456, 0xdff00000/262144, I/O @ 0x0000e0f0/8 (--) PCI: (0:0:2:1) 8086:27a6:1462:0110 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xdfe00000/524288 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (==) Matched intel as autoconfigured driver 0 (==) Matched vesa as autoconfigured driver 1 (==) Matched fbdev as autoconfigured driver 2 (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.9.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 0.4.2 ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) LoadModule: "mouse" (WW) Warning, couldn't open module mouse (II) UnloadModule: "mouse" (EE) Failed to load module "mouse" (module does not exist, 0) (II) LoadModule: "kbd" (WW) Warning, couldn't open module kbd (II) UnloadModule: "kbd" (EE) Failed to load module "kbd" (module does not exist, 0) (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 0...@00:02:0 (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.7.7, module version = 0.0.2 ABI class: X.Org Video Driver, version 6.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME (--) intel(0): Chipset: "945GME" (II) intel(0): Output VGA1 using monitor section Configured Monitor (II) intel(0): Output LVDS1 has no monitor section (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 (II) intel(0): EDID for output VGA1 (II) intel(0): EDID for output LVDS1 (II) intel(0): Not using default mode "320x175" (doublescan mode not supported) (II) intel(0): Not using default mode "320x200" (doublescan mode not supported) (II) intel(0): Not using default mode "360x200" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (interlace mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "832x624" (exceeds panel dimensions) (II) intel(0): Not using default mode "416x312" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions) (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Printing probed modes for output LVDS1 (II) intel(0): Modeline "1024x600"x60.0 45.00 1024 1072 1184 1200 600 601 604 625 (37.5 kHz) (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (II) intel(0): Output VGA1 disconnected (II) intel(0): Output LVDS1 connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS1 using initial mode 1024x600 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) UnloadModule: "vesa" (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) UnloadModule: "fbdev" (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) UnloadModule: "fbdevhw" (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so (==) Depth 24 pixmap format is 32 bpp (II) intel(0): [DRI2] Setup complete (**) intel(0): Kernel mode setting active, disabling FBC. (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): No memory allocations (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 270 x 158 (II) Synaptics touchpad driver version 1.2.2 Synaptics Touchpad no synaptics event device found (**) Option "Device" "/dev/psaux" (**) Option "HorizEdgeScroll" "0" Query no Synaptics: 6003C8 (--) Synaptics Touchpad: no supported touchpad found (EE) Synaptics Touchpad Unable to query/initialize Synaptics hardware. (EE) PreInit failed for input device "Synaptics Touchpad" (II) UnloadModule: "synaptics" (II) LoadModule: "mouse" (WW) Warning, couldn't open module mouse (II) UnloadModule: "mouse" (EE) Failed to load module "mouse" (module does not exist, 0) (EE) No input driver matching `mouse' (II) LoadModule: "kbd" (WW) Warning, couldn't open module kbd (II) UnloadModule: "kbd" (EE) Failed to load module "kbd" (module does not exist, 0) (EE) No input driver matching `kbd' (II) config/udev: Adding input device Power Button (/dev/input/event4) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device Video Bus (/dev/input/event5) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device Lid Switch (/dev/input/event1) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device Power Button (/dev/input/event2) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device Sleep Button (/dev/input/event3) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/event7) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/mouse0) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device PC Speaker (/dev/input/event6) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event8) (II) AutoAddDevices is off - not adding device.
_______________________________________________ xorg@lists.freedesktop.org: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.freedesktop.org/mailman/listinfo/xorg Your subscription address: arch...@mail-archive.com
