On Wed, 2016-11-30 at 09:35 -0500, Gene Heskett wrote: > On Wednesday 30 November 2016 06:38:36 Eric Gunther wrote: > > > On Wed, 2016-11-30 at 00:52 -0500, Gene Heskett wrote: > > > Greetings all; > > > > > > I've no clue if any of you are familar with raspian, built for > > > the > > > armhf > > > SBC's.. > > > > > > I just installed it, and I am pleasantly surprised, it does > > > almost > > > everything well, except: > > > > > > When the mouse is moved, there is a huge lag, taking a fat second > > > to > > > move > > > the pointer to the new location, like there is a low pass filter > > > in > > > the > > > data path between the mouses data coming into the usb port, and > > > where its fed into X. There is a tuning utility for kbd and > > > rodent, > > > and it does seem to have some slight effect on how it moves but > > > the > > > extremes of > > > the two sliders have no effect on this moving in cold molasses > > > motion. > > > Its very distracting, taking around 4 to 6 seconds to do > > > something > > > with > > > the mouse, that I can do in a second or less on a Dell 6 feet > > > away > > > running a milling machine. > > > > > > Clues checked, url's read etc. > > > > > > Thanks all. > > > > > > Cheers, Gene Heskett > > > > I think you need to edit cmdline.txt. I believe its in the boot > > directory. It will look like this: > > > > dwc_otg.lpm_enable=0 > > console=ttyAMA0,115200 > > kgdboc=ttyAMA0,115200 > > console=tty1 > > root=/dev/mmcblk0p2 > > rootfstype=ext4 > > elevator=deadline > > rootwait > > Some common options: > > > > dwc_otg.speed=1 > > USB v1 speed > > smsc95xx.turbo_mode=N > > if the raspberrypi freezes after filling the log withe kevent > > dropped. > > smsc95xx.macaddr=B8:27:EB:59:EB:25 > > it will override the default mac adress with the specified one. > > dwc_otg.microframe_schedule=1 > > console=ttyAMA0,115200 > > usbhid.mousepoll=8 > > ip=192.168.0.10 > > > > > > Play with the usbhid.mousepoll=8 options. > > > > references: > > > > http://elinux.org/RPi_cmdline.txt > > > > https://github.com/raspberrypi/linux/issues/642 > > > > > > -eg > > > That "usbhid.mousepoll=0" was not in that file, so I appended it, but > will not reboot until I am at the machine to observe. Thank you very > much. > > I also see that apt is upgrading 9 packages, including the raspberry > kernel. So I will check when its done to see if that option > survived. > > And at the 54% mark of the unpack and install, it has crashed, or > disconnected my ssh login. No, it was installing kernel headers, > which > apparently took several minutes but is now progressing again. And > that > setting survived the update from kernel 4.4.27 v7 to 4.4.34 v7. > Reboot > in progress, uname now shows > > 4.4.34-v7+ #930 SMP Wed Nov 23 15:20:41 GMT 2016 armv7l GNU/Linux > > Looks promising. Mouse is fixed. > > Now I wish for more workspaces. 1 more would be a great help. I am > spoiled with 10 setup on this old relic phenom. :) > > Thanks Eric. > > Cheers, Gene Heskett
your welcome. -eg _______________________________________________ [email protected]: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: https://lists.x.org/mailman/listinfo/xorg Your subscription address: %(user_address)s
