Le 06/03/2018 à 20:12, Cooper, Douglas A. (GRC-FTK0) a écrit :

I would expect the following command to then scale the screen while still occupying only the upper portion of the monitor:

xrandr --fb 1920x540 --output VGA1 --scale 1x.5

However, this ends up scaling the display and occupying the entire monitor.

may be my experience can help you.


I have a 15.6 wide lcd with 1366x768 resolution, and I wanted to display full hd (1920x1080)

I could achieve it after long work with use of virtual console

by the way, the goal was to scale the screen to have smaller characters, specially in decorations, and it works very well

the first part (where is the config stored is important because some tests failed because of other config misplaced

last result if a script

xrandr --newmode "1920x1080" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
xrandr  --addmode VIRTUAL1 1920x1080
xrandr --fb 1920x1080 --dpi 96 --output eDP1 --pos 0x0 --scale-from 1920x1080 --same-as VIRTUAL1


xorg@lists.x.org: X.Org support
Archives: http://lists.freedesktop.org/archives/xorg
Info: https://lists.x.org/mailman/listinfo/xorg
Your subscription address: %(user_address)s

Reply via email to