Hi! It didn't work. same error is coming. plz write a sample static config.
Regards, Arjun Original Message: ----------------- From: Pavlin Radoslavov [EMAIL PROTECTED] Date: Mon, 22 Oct 2007 22:41:08 -0700 To: [EMAIL PROTECTED], [email protected] Subject: Re: [Xorp-hackers] (no subject) [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > Hi all! > > > I tried to configure static routes through CLI but it failed at > creating route on 3rd level > > i.e > level 1 protocols { > level 2 static { > level 3 route 192.168.131.74/24 { > > following error i got at this level 3rd:- > > syntax error, expecting `<IPv4Net>',or `<IPv6Net>'. Try to use 192.168.131.00/24 instead of 192.168.131.74/24. The subnet address should have the bits after the netmask set to zero. Hope that helps, Pavlin > plz write what should be the in 3rd level and onwards > > Thanking u All in advance > Arjun > > > > > -------------------------------------------------------------------- > mail2web - Check your email from the web at > http://link.mail2web.com/mail2web > > > > _______________________________________________ > Xorp-hackers mailing list > [email protected] > http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers -------------------------------------------------------------------- mail2web.com - Microsoft® Exchange solutions from a leading provider - http://link.mail2web.com/Business/Exchange _______________________________________________ Xorp-hackers mailing list [email protected] http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers
