Hi,
I have a gateway that is configured with two interfaces 192.168.21.1 and
192.168.20.1. I want the gateway to distribute both routes into 192.168.20.0
domain. The problem that I am facing is that when
RIP and BGP are configured to distribute routes using {protocol:
"connected"}, the BGP would only distribute 192.168.21.0/24 but not
192.168.20.0/24.
If I set RIP to distribute static route (as define below while BGP
distribute {protocol: "connected"}, then BGP would distribute both
192.168.20.0/24 and 192.168.21.0/24. However RIP will not distribute
192.168.20.0 /24 and 192.168.21.0/24.
Can someone please let know what configuration should I used so BGP and RIP
distribute both routes into domain 192.168.20.0.
Thank you,
Maher
protocols {
static {
route 192.168.20.0/24 {
next-hop: 192.168.20.1
metric: 1
}
route 192.168.21.0/24 {
next-hop: 192.168.20.1
metric: 1
}
}}
_______________________________________________
Xorp-hackers mailing list
[email protected]
http://mailman.ICSI.Berkeley.EDU/mailman/listinfo/xorp-hackers
