Hi,
first of all, thanks for yesterday's quick reply. The errors I was
talking about were in fact solved by the new version. I had a
persistent error in ./autogen.sh that I was only able to solve by
doing `sudo ./autogen.sh` and `sudo make`. However, that works now.
Regarding the problem of the third button, here is the result of `xinput list`:
carlo@med:~$ xinput list
⎡ Virtual core pointer id=2
[master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave
pointer (2)]
⎜ ↳ N-trig DuoSense Pen id=10
[slave pointer (2)]
⎜ ↳ N-trig DuoSense id=11
[slave pointer (2)]
⎜ ↳ Crucialtek co.,LTD Optical Track Pad id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3
[master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Video Bus id=6
[slave keyboard (3)]
↳ Sony Vaio Keys id=7
[slave keyboard (3)]
↳ Power Button id=8
[slave keyboard (3)]
↳ USB2.0 Camera Front id=9 [slave
keyboard (3)]
↳ USB2.0 Camera Rear id=13 [slave
keyboard (3)]
↳ AT Translated Set 2 keyboard id=14 [slave keyboard (3)]
And when I do `xinput test 10` to read the signal sent to the pen
devices, there is no particular signal I receive when using the third
button.
However, the third button is not dead. In fact, if I create the file
/etc/X11/xorg.conf.d/52-wacom.conf and write in it these lines:
Section "InputClass"
Identifier "Wacom N-Trig class"
MatchProduct "ID 1b96:0f04|N-trig DuoSense Pen"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
Option "Button3" "3"
EndSection
Then my xinput --list becomes:
carlo@med:~$ xinput list
⎡ Virtual core pointer id=2
[master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave
pointer (2)]
⎜ ↳ N-trig DuoSense Pen stylus id=10 [slave
pointer (2)]
⎜ ↳ N-trig DuoSense id=11
[slave pointer (2)]
⎜ ↳ Crucialtek co.,LTD Optical Track Pad id=12 [slave pointer (2)]
⎜ ↳ N-trig DuoSense Pen eraser id=15 [slave
pointer (2)]
⎜ ↳ N-trig DuoSense Pen pad id=16 [slave
pointer (2)]
⎣ Virtual core keyboard id=3
[master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave
keyboard (3)]
↳ Video Bus id=6
[slave keyboard (3)]
↳ Sony Vaio Keys id=7
[slave keyboard (3)]
↳ Power Button id=8
[slave keyboard (3)]
↳ USB2.0 Camera Front id=9 [slave
keyboard (3)]
↳ USB2.0 Camera Rear id=13 [slave
keyboard (3)]
↳ AT Translated Set 2 keyboard id=14 [slave
keyboard (3)]
I have more devices now, and if I do `xinput test 15`, i.e. the
eraser, it correctly reports the pressure of my 'third button'. At
the same time, when I touch the third button, the cursor briefly
flickers to the top left corner of the screen, and returns (I'd like
it to stop doing this).
I copied that snippet from this page:
http://ubuntuforums.org/archive/index.php/t-2187064.html which is
about another Sony model.
So, the question is, how do I modify the snippet I put there for my
needs, and moreover, how to convince xournal to use the binding
for the third button (for now it ignores it)?
Thanks again
Carlo Nucera
2015-02-02 10:51 GMT+01:00 Denis Auroux <aur...@math.berkeley.edu>:
> Hi there,
>
> It seems that most of your problems are exactly what's been fixed in the
> CVS/GIT code repositories since release 0.4.8.
> The simplest solution for you is to uninstall the Ubuntu package, download
> the GIT repository, and compile. Roughly:
>
> - go to http://sourceforge.net/p/xournal/code/ci/master/tree/
> click on "download snapshot" in the gray bar at the top of the list of files
> (or run the "git clone" command shown if you have git).
>
> - make sure you have the development packages for gtk2, libgnomecanvas and
> poppler installed (add the packages in your package manager if needed) (in
> Fedora these are called gtk2-devel, libgnomecanvas-devel,
> poppler-glib-devel; not sure what they're called in Ubuntu).
>
> - in the xournal source code directory, run "./autogen.sh". See if there's
> error messages about missing libraries or packages, install them if needed.
>
> - run "make"
> Try going into the src directory and running ./xournal to see if things seem
> to work.
>
> - finally, as root, run "make install" and "make desktop-install"
> (xournal will then live in /usr/local/src/xournal, and might or might not
> need to be manually added to your launcher menus).
>
> You could also request from the Ubuntu package maintainer an update to the
> latest GIT code base because of these bugs.
>
> More in detail:
>
>> 1) I'd like to obtain a setup like the one one-note has, in which I
>> use the hand to move around (hand mode). So, I'm trying to use the
>> button `Designate as touchscreen`, for which I have a number of
>> options:
>>
>> - Virtual Core XTEST pointer
>> - Crucialtek co.,LTD Optical Track Pad
>> - N-Trig Duosense Pen
>> - N-Trig Duosense
>> - Core Pointer
>>
>> I tried to set `N-Trig Duosense` as the touchscreen, but then the
>> option `Touchscreen as Handtool` turns *both* the touch and the pen in
>> the handtool. I'd like the pen to remain usable to write.
>
>
> This is fixed in the CVS/GIT. Release 0.4.8 checked only whether the touch
> device name is a *substring* of the device that is drawing currently (so
> that the default choice "touch" would catch most touchscreens), but since
> "N-Trig Duosense" is a substring of "N-Trig Duosense Pen", the pen also gets
> caught. Because too many users were affected by this problem, we removed
> the behavior and now we need an exact match. So: once you install the latest
> version, select "N-Trig Duosense" and it should work.
>
>> 2) Button 3 mapping. I don't seem to be able to change the function of
>> my third button, which does always what the primary pen is
>> doing. Button 2 map works fine. Are there any ways in which I could
>> troubleshoot this?
>
>
> Do you mean the menu entries under Options just don't work, or do you mean
> that what you select for "Button 3 mapping" doesn't affect what your "third
> button" is doing? The latter is more logical, and would indicate that what
> you think of as your "third button" is not configured as button 3 for
> XInput.
>
> It's very crude, but run "xev" from a terminal, and click with your various
> buttons in the xev window but outside of the small rectangle. It should give
> things like:
>
> ButtonPress event, serial 36, synthetic NO, window 0x1600001,
> root 0xa1, subw 0x0, time 217099480, (114,126), root:(122,210),
> state 0x0, button 1, same_screen YES
>
> ButtonRelease event, serial 36, synthetic NO, window 0x1600001,
> root 0xa1, subw 0x0, time 217099576, (114,126), root:(122,210),
> state 0x100, button 1, same_screen YES
>
> Here "button 1", meaning the button I just pressed is configured as "button
> 1".
>
> There may or may not be configuration options for your device to configure
> the "third button" as a "button 3", look into the xinput options and
> commands. (E.g. start with "xinput --list-props (the device id)"). Or you
> might have a user-friendly configurator in your system config menus, but it
> might not have all the options.
>
>> 3) When I set pen pressure to on, the pen outputs a streak of pressure
>> when I'm about to lift my pen from the tablet (see the attached
>> pdf). This happens if I try to draw a very low pressured line, when I
>> lift the pen from the tablet, and when I handwrite (the end of the
>> letter display a sharp trait). Especially the second problem is a bit
>> unsettling. So, is there a way in which I could tweak the pen output
>> to avoid that? (I could always keep pen pressure off, but that's a
>> shame).
>
>
> This sounds identical to a bug that was fixed since release 0.4.8. Switching
> to the GIT/CVS version should also fix that.
>
> Hope this helps,
> Denis
>
>>
>> Thanks in advance
>> Carlo Nucera
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Dive into the World of Parallel Programming. The Go Parallel Website,
>> sponsored by Intel and developed in partnership with Slashdot Media, is
>> your
>> hub for all things parallel software development, from weekly thought
>> leadership blogs to news, videos, case studies, tutorials and more. Take a
>> look and join the conversation now. http://goparallel.sourceforge.net/
>>
>>
>>
>> _______________________________________________
>> Xournal-devel mailing list
>> Xournal-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/xournal-devel
>>
>
> --
> Denis Auroux
> UC Berkeley, Department of Mathematics aur...@math.berkeley.edu
> Institut Henri Poincare, Paris aur...@ihp.fr
------------------------------------------------------------------------------
Dive into the World of Parallel Programming. The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________
Xournal-devel mailing list
Xournal-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xournal-devel
