Hi!
I've got S3 Trio64V+ (2MB) made by Eagle and X3.3.2.3 on RH5.2.
When I try to swith to a color depth more than 8 bit, fonts quickly destroys
after some operations on windows, bitmaps etc. After some time it becomes
completely impossible to read any text. First time you can see a little box
approximately 80x10 pixels. Then, when you do something with your windows,
menus etc., some font glyphs begin to
Upgrade to 3.3.5 doesn't help.
Here's log file. As I can understand, there's an overlapping of pixmaps' and
fonts' buffers (am I right?). Sorry if there's some solution here and I
didn't find it.
===========================================================================
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.34 i686 [ELF]
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
newmmio, mmio_928, s3_generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc102"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/koi8-collection/75dpi:unscaled,
/usr/X11R6/lib/X11/fonts/koi8-cronyx/misc:unscaled,/usr/X11R6/lib/X11/fonts/mi
sc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/c
yrillic:unscaled,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/koi8-collection/75dp
i,/usr/X11R6/lib/X11/fonts/koi8-cronyx/misc,/usr/X11R6/lib/X11/fonts/75dpi/,/u
sr/X11R6/lib/X11/fonts/cyrillic"
(--) S3: PCI: Trio32/64 rev 44, Linear FB @ 0xf8000000
(--) S3: chipset: Trio64V+ rev. 44
(**) S3: chipset driver: newmmio
(--) S3: card type: PCI
(--) S3: videoram: 2048k
(**) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135 MHz
(**) S3: Using Trio32/64 programmable clock (MCLK 50.114 MHz)
(--) S3: Maximum allowed dot-clock: 95.000 MHz
(**) S3: Mode "800x600": mode clock = 40.000
(**) S3: Mode "640x480": mode clock = 31.500
(**) S3: Using 16 bpp. Color weight: 565
(--) S3: Virtual resolution set to 800x600
(--) S3: Local bus LAW is 0xF8000000
(--) S3: Using a banksize of 2048k, line width of 800
(--) S3: Using a single 64x64 area at (736,601) for expanding pixmaps
(--) S3: Using 16 planes of 736x709 at (0,601) aligned 8 as font cache
=============================================================================
that's the scanpci output:
PCI says configuration type 1
PCI probing configuration type 1
Probing for devices on PCI bus 0:
pci bus 0x0 cardnum 0x00 function 0x0000: vendor 0x10b9 device 0x1521
ALI M1521
pci bus 0x0 cardnum 0x02 function 0x0000: vendor 0x10b9 device 0x1523
ALI M1523
pci bus 0x0 cardnum 0x02 function 0x0001: vendor 0x10b9 device 0x5219
ALI M5219
pci bus 0x0 cardnum 0x04 function 0x0000: vendor 0x5333 device 0x8811
S3 Trio32/64
pci bus 0x0 cardnum 0x06 function 0x0000: vendor 0x1050 device 0x0940
Windbond 89C940 NE2000-PCI
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
