On 0, Matt Piechota <[EMAIL PROTECTED]> wrote: > On Wed, 12 Sep 2001, Subba Rao wrote: > > > There is another identical PC with Slackware 8 Linux running > > X windows successfully. I copied XF86Config to /etc/X11/ and > > I got the errors (after "starttx") listed below. How do I narrow > > down to the required file sets or configuration issues? > > How identical? My experience with that series is PC300GL is a mismash of > parts. Is the 7-digit part number the same? > > The second thing is alot of those had S3 Trio3D chips in them (86c765 or > 766 that I've seen), which don't seem to be terribly well supported by > XFree (which is S3's fault, IIRC). > I don't know about the serial# but both of them have S3 on motherboard. SuperProbe says the second machine has memory 4096K. The strange thing is with "xf86cfg". When I use this tool, X starts with excellent resolution. The configuration window/panel stays there only for a second. -- Subba Rao [EMAIL PROTECTED] http://members.home.net/subba9/ GPG public key ID CCB7344E Key fingerprint = A8DD 4CBA 1E9B D962 A55B 2B55 BAFE 92C5 CCB7 344E _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
