Hi all.
I encountered the problem when using RedHat 7.1 and nVidea Quadro2
chip card. I investigate a lot of documents myselft but only to fail
to find answer... Could you held me...?
[ Symptoms ]
This issue occurs when I set line attribute to be wave
line (LineOnOffDash). Sometimes it works correct sometimes not. it
depends on the combination of an ordinate and abscissa.
normal -> -- -- -- -- -- -- -- -- -- -- -- -- --
this issue -> -- -- -- --
You can see what happend at my place from next URL. Please check it.
I upload snap shots, program file, XF86Config-4 file and
XFree86.0.log file. I am afraid too much file make ML traficc jam...
http://www.rescom-net.com/~hara/nvidia/
I verified next combination do make this problem.
Start point (201, 581)
End point (200,200)
Window size (512,512)
[ Question ]
How can I avoid this problem?? I dont't want to go back to RedHat6.2.
[ Environment ]
Card : ELSA Synergy III ( nVIDIA Quadro2 MXR )
OS : RedHat Linux 7.1
Driver : NVIDIA_GLX-1.0-1512.i386.rpm
NVIDIA_kernel-1.0-1512.rh71up.i386.rpm
XFree86 : XFree86-4.0.3-5
[ Investigation so far ]
1. RedHat Linux 6.2 has no problem. (Exactly into same hard ware!)
2. I removed 'Load "GLCore"' and 'Load "dri"' in XF86Config-4
3. I tried Option 'NoAccel' and 'NoRenderAccel' to On Off both in
XF86Config-4
Thank you for your cooperation in Advance.
-----------------
best regards.
Yuji Hara
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
