Hi
I am having trouble with an AGP ATI Xpert card, which I believe is an
Xpert 2000, with a Rage 128 PF Pro chipset, and a Samsung SyncMaster 170T
flatpanel.
The analogue output of the ATI card works fine, but attempting to use
the digital output causes a total system freeze on starting X.
The XF86Config file is set to use the r128 driver. The AGPMode option
appears to make no difference to the behaviour.
I have tried XFree86 4.1.99 and also a CVS build from a couple of days
ago. In both cases, X -probeonly works successfully, whilst attempting
to run the server properly causes the crash.
The motherboard is an ASUS A7M266; the kernel is 2.4.7.
Relevant output of X is below... any ideas would be appreciated. So far
the only solution I have heard is to use the "vesa" driver!
Mark
--
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:5:0) ATI Rage 128 Pro PF rev 0, Mem @ 0xf0000000/26, 0xef000000/14, I/O @
0xd800/8, BIOS @ 0xeffe0000/17
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(snip)
(II) Module r128: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 4.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE (AGP)
(--) Chipset ATI Rage 128 Pro PF (AGP) found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) R128(0): PCI bus 1 card 5 func 0
(**) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Pro PF (AGP)" (ChipID = 0x5046)
(--) R128(0): Linear framebuffer at 0xf0000000
(--) R128(0): MMIO registers at 0xef000000
(--) R128(0): BIOS at 0xeffe0000
(--) R128(0): VideoRAM: 32768 kByte (64-bit SDR SGRAM 1:1)
(II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=40000; xclk=12000
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE DDC supported
(II) R128(0): Manufacturer: SAM Model: 1e57 Serial#: 1129197879
(II) R128(0): Year: 2001 Week: 30
(II) R128(0): EDID Version: 1.3
(II) R128(0): Digital Display Input
(II) R128(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) R128(0): Gamma: 2.40
(II) R128(0): DPMS capabilities: Off; RGB/Color Display
(II) R128(0): First detailed timing is preferred mode
(II) R128(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
(II) R128(0): blueX: 0.143 blueY: 0.102 whiteX: 0.318 whiteY: 0.339
(II) R128(0): Supported VESA Video Modes:
(II) R128(0): 720x400@70Hz
(II) R128(0): 640x480@60Hz
(II) R128(0): 640x480@67Hz
(II) R128(0): 640x480@72Hz
(II) R128(0): 640x480@75Hz
(II) R128(0): 800x600@56Hz
(II) R128(0): 800x600@60Hz
(II) R128(0): 800x600@72Hz
(II) R128(0): 800x600@75Hz
(II) R128(0): 832x624@75Hz
(II) R128(0): 1024x768@60Hz
(II) R128(0): 1024x768@70Hz
(II) R128(0): 1024x768@75Hz
(II) R128(0): 1280x1024@75Hz
(II) R128(0): 1152x870@75Hz
(II) R128(0): Manufacturer's mask: 0
(II) R128(0): Supported Future Video Modes:
(II) R128(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) R128(0): #1: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) R128(0): #2: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) R128(0): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) R128(0): Supported additional Video Mode:
(II) R128(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) R128(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) R128(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) R128(0): Ranges: V min: 56 V max: 85 Hz, H min: 30 H max: 81 kHz, PixClock max
130 MHz
(II) R128(0): Monitor name: 170T Digital
(II) R128(0): Serial No: H4VR703572
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): Monitor0: Using hsync range of 31.00-80.00 kHz
(II) R128(0): Monitor0: Using vrefresh range of 58.00-75.00 Hz
(II) R128(0): Clock range: 12.50 to 400.00 MHz
(II) R128(0): Not using default mode "640x350" (vrefresh out of range)
(II) R128(0): Not using default mode "640x400" (vrefresh out of range)
(II) R128(0): Not using default mode "720x400" (vrefresh out of range)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "800x600" (vrefresh out of range)
(II) R128(0): Not using default mode "800x600" (vrefresh out of range)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of range)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(--) R128(0): Virtual size is 1280x1024 (pitch 1280)
(**) R128(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(--) R128(0): Display dimensions: (34, 27) cm
(--) R128(0): DPI set to (95, 96)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(**) R128(0): Using AGP 4x mode
--
Mark Shinwell -- http://mrs30.quns.cam.ac.uk/ -- [EMAIL PROTECTED]
Theory and Semantics Group, University of Cambridge Computer Laboratory
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
