I noticed in my previous post that I was using the Matrox mga_hal, and
that people might not want to try to debug a problem with a closed-source
binary-only module present. So I removed mga_hal. The same thing (hang
on startup) happens, though output differs slightly. Here's the log:
=== output starts here ===
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: xx August 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Sep 24 11:25:13 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen1" (0)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(**) Xinerama: enabled
(--) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(0:11:0) Matrox MGA 2164W rev 0, Mem @ 0xe0000000/24, 0xdd800000/14,
0xdd000000/23, BIOS @ 0x000c0000/16
(--) PCI: (1:0:0) Matrox MGA G400 AGP rev 5, Mem @ 0xe2000000/25, 0xdf000000/14,
0xde800000/23
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(WW) MGA: No matching Device section for instance (BusID PCI:0:11:0) found
(--) Chipset mgag400 found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(**) MGA(0): Depth 24, (--) framebuffer bpp 32
(==) MGA(0): RGB weight 888
(WW) Warning, couldn't open module mga_hal
(EE) MGA: Failed to load module "mga_hal" (module does not exist, 0)
(II) MGA(0): Matrox HAL module not found - using builtin mode setup instead
(--) MGA(0): Chipset: "mgag400"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xE2000000
(--) MGA(0): MMIO registers at 0xDF000000
(--) MGA(0): Pseudo-DMA transfer window at 0xDE800000
(WW) MGA(0): Video BIOS info block not detected!
(--) MGA(0): VideoRAM: 32768 kByte
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.2.0
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 300 MHz
(II) MGA(0): Monitor1: Using hsync range of 30.00-96.00 kHz
(II) MGA(0): Monitor1: Using vrefresh range of 70.00-120.00 Hz
(II) MGA(0): Clock range: 12.00 to 300.00 MHz
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "1280x960" (vrefresh out of range)
(II) MGA(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) MGA(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) MGA(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (vrefresh out of range)
(--) MGA(0): Virtual size is 1600x1200 (pitch 1600)
(**) MGA(0): Default mode "1600x1200": 202.5 MHz, 93.8 kHz, 75.0 Hz
(==) MGA(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(--) Depth 24 pixmap format is 32 bpp
=== here is where it hangs ===
I can run it under strace or gdb to try to figure out what it's doing when
it hangs, if that would be at all useful. I'd rather not build from scratch
(I'm using the Debian package), but I will if it would help.
Dan
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert