X server starts and works.
but image is displayed with different X-size than rendered. the effect is
that points look like that:
x
x
x
x
x
instead of
x
x
x
x
x
(shift is quite large, not 1)
in the same time cursor is OK.
what's wrong?!!!!
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: NetBSD/i386 1.5.2 [ELF] The NetBSD Foundation, Inc.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Oct 4 13:07:55 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(--) Using pcvt driver (version 3.32)
(--) PCI:*(0:10:0) Rendition Verite 2100/2200 rev 6, Mem @ 0xe9000000/24,
0xec000000/18, I/O @ 0xdc00/8, BIOS @ 0xea000000/17
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(II) GLINT: driver for 3Dlabs chipsets: gamma, ti_pm2, ti_pm, pm3, pm2v,
pm2, pm, 300sx, 500tx, mx, delta
(II) NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2,
RIVATNT2 (A), RIVATNT2 (B), RIVATNT2 (Ultra), RIVATNT2 (Vanta),
RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR,
Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra,
Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR,
GeForce 2 Go, GeForce3, GeForce3 (rev 1), GeForce3 (rev 2),
GeForce3 (rev 3)
(II) TGA: driver for Digital chipsets: tga, tga2
(II) S3VIRGE: driver (version 1.6.0) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) SIS: driver for SiS chipsets: SIS5597, SIS5598, SIS530, SIS6326,
SIS300, SIS630, SIS540
(II) Rendition: rendition driver (version 4.0) for chipsets: V1000,
V2100/V2200
(II) NEOMAGIC: Driver for Neomagic chipsets: neo2070, neo2090, neo2093,
neo2097, neo2160, neo2200, neo2230, neo2360, neo2380
(II) I740: Driver for Intel i740 chipset: i740 (agp), i740 (pci)
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
3dfx Voodoo3, 3dfx Voodoo5
(II) SAVAGE: driver (version 1.1.16) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister,
TwisterK
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
CL-GD5465, CL-GD7548
(II) VMWARE: driver for VMware SVGA: vmware0405, vmware0710
(II) TSENG: driver for Tseng Labs chipsets: ET4000, ET4000W32, ET4000W32i,
ET4000W32p, ET6000, ET6100
(II) TRIDENT: driver for Trident chipsets: tvga8900d, cyber9320, cyber9388,
cyber9397, cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4,
tgui9420dgi, tgui9440agi, tgui9660, tgui9680, providia9682,
providia9685, cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d,
cyberbladei7, cyberbladei7d, cyberbladei1, cyberbladei1d,
cyberbladeAi1, cyberbladeAi1d, cyberbladeXP, cyberbladeXPm
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) APM: driver for the Alliance chipsets: AP6422, AT24, AT3D
(II) FBDev: driver for framebuffer: fbdev, afb
(II) I128: driver for Number Nine I128 chipsets: i128, i128v2, i128t2r,
i128t2r4
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE (AGP)
(II) ark: driver (version 0.5.0 for ARK Logic chipset: ark1000pv,
ark2000pv, ark2000mt
(II) CYRIX: driver for Cyrix MediaGX Processors: mediagx
(II) Silicon Motion: driver (version 1.2.2) for Silicon Motion Lynx chipsets:
Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(--) Chipset V2100/V2200 found
(--) Rendition(0): VMware Guest X Server 10.4.0 - build=
(EE) Rendition(0): No vmware driver section
(II) Rendition(0): Initializing int10
(II) Rendition(0): Primary V_BIOS segment is: 0xc000
(**) Rendition(0): Depth 24, (--) framebuffer bpp 32
(==) Rendition(0): RGB weight 888
(==) Rendition(0): Default visual is TrueColor
(==) Rendition(0): Using gamma correction (1.0, 1.0, 1.0)
(--) Rendition(0): Chipset: "V2100/V2200".
(--) Rendition(0): Rendition V2100/V2200 @ dc00/e9000000
(**) Rendition(0): Requesting Write-Combined memory access
(WW) Rendition(0): Skipping acceleration
(--) Rendition(0): videoRam: 8192 kBytes
(**) Rendition(0): "Shadow Framebuffer" disabled
(II) Rendition(0): initializing int10
(II) Rendition(0): Primary V_BIOS segment is: 0xc000
(II) Rendition(0): VESA BIOS detected
(II) Rendition(0): VESA VBE DDC supported
(II) Rendition(0): Monitor0: Using hsync range of 30.00-70.00 kHz
(II) Rendition(0): Monitor0: Using vrefresh range of 50.00-150.00 Hz
(II) Rendition(0): Maximum clock: 170.00 MHz
(II) Rendition(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) Rendition(0): Not using default mode "1280x960" (hsync out of range)
(II) Rendition(0): Not using default mode "1280x1024" (vertical timing out of range)
(II) Rendition(0): Not using default mode "1280x1024" (vertical timing out of range)
(II) Rendition(0): Not using default mode "1280x1024" (vertical timing out of range)
(II) Rendition(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) Rendition(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) Rendition(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) Rendition(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) Rendition(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) Rendition(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) Rendition(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) Rendition(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) Rendition(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) Rendition(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) Rendition(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) Rendition(0): Not using default mode "1400x1050" (vertical timing out of range)
(II) Rendition(0): Not using default mode "1400x1050" (vertical timing out of range)
(--) Rendition(0): Virtual size is 1024x768 (pitch 1024)
(**) Rendition(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(==) Rendition(0): DPI set to (75, 75)
(WW) Rendition(0): xf86UnMapVidMem: cannot find region for [0xe9000000,0x2000]
(--) Depth 24 pixmap format is 32 bpp
(==) Rendition(0): Silken mouse enabled
(WW) Rendition(0): Option "DacSpeed" is not used
(**) Mouse0: Protocol: wsmouse
(**) Mouse0: Core Pointer
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
