Hello XPert list,
I am running 4.1.0 on a Dell which has an onboard ATI (which I cant
select in the BIOS ....i.e. the second card becomes the boot graphics
adapter)
Cant do a multihead with onboard ATI(PCI) + extra ATI(PCI), so I just
got an old S3(PCI).
so now I have an extra ATI and an extra S3 to do multihead ..... (I am
ignoring the onboard ATI), but it is still not working.
Each card works when used by itself, together I get a blank screen on
the ATI and no signal from the S3.
here are the error log, and the XF86config file.....
-----------------------------------------------------
...(this is just the end)
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 8, (--) framebuffer bpp 8
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 2.0
(II) ATI(0): VESA VBE Total Mem: 4096 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): VESA VBE OEM Software Rev: 1.0
(II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) ATI(0): VESA VBE OEM Product: MACH64GT
(II) ATI(0): VESA VBE OEM Product Rev: 01.00
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): VESA VBE DDC Level 2
(II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
(II) ATI(0): VESA VBE DDC read failed
(WW) System lacks support for changing MTRRs
(--) ATI(0): ATI 3D Rage IIc graphics controller detected.
(--) ATI(0): Chip type 4756 "GV", version 2, foundry UMC, class 0,
revision 0x01.
(--) ATI(0): PCI bus interface detected; block I/O base is 0xD400.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is PseudoColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Storing hardware cursor image at 0xF23FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xF2000000.
(!!) ATI(0): Virtual resolutions will be limited to 4095 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xF9000400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xF9000000.
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 4096 kB of SDRAM (1:1) detected (using 4095 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(0): Mitsubishi Diamond Plus 200u (NSH1117): Using hsync range
of 30.00-108.00 kHz
(II) ATI(0): Mitsubishi Diamond Plus 200u (NSH1117): Using vrefresh
range of 50.00-160.00 Hz
(II) ATI(0): Maximum clock: 230.00 MHz
(II) ATI(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
(**) ATI(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) ATI(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
772 808 +hsync +vsync
(**) ATI(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604
631 +hsync +vsync
(**) ATI(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484
509 -hsync -vsync
(==) ATI(0): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
S3VPreInit 1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(**) S3VIRGE(1): Depth 8, (--) framebuffer bpp 8
(==) S3VIRGE(1): Default visual is PseudoColor
S3VGetRec
(==) S3VIRGE(1): Using HW Cursor
(==) S3VIRGE(1): Using fb.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) S3VIRGE(1): initializing int10
Fatal server error:
Caught signal 11. Server aborting
------------------------------config file:
# XFree86 4.0 configuration generated by Xconfigurator
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen1"
Screen "Screen0" Relative "Screen1" 100 100
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
# By default, Red Hat Linux 6.0 and later use xfs
Section "Files"
FontPath "unix/:7100"
EndSection
# global values
Section "ServerFlags"
Option "Xinerama" "on"
EndSection
# Module loading section
Section "Module"
Load "dbe" # Double-buffering
Load "GLcore" # OpenGL support
Load "dri" # Direct rendering infrastructure
Load "glx" # OpenGL X protocol interface
Load "extmod" # Misc. required extensions
Load "v4l" # Video4Linux
# Load "pex5" # PHIGS for X 3D environment (obsolete)
# Load "record" # X event recorder
# Load "xie" # X Image Extension (obsolete)
# You only need the following two modules if you do not use xfs.
# Load "freetype" # TrueType font handler
# Load "type1" # Adobe Type 1 font handler
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "on"
Option "ZAxisMapping" "4 5"
EndSection
# Monitor 1
Section "Monitor"
Identifier "Iiyama A701GT, VisionMasterPro 400"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 27.0-96.0
VertRefresh 50.0-160.0
Option "dpms"
EndSection
# Monitor 2
Section "Monitor"
Identifier "Mitsubishi Diamond Plus 200u (NSH1117)"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0-108.0
VertRefresh 50.0-160.0
Option "dpms"
EndSection
# Device 1
Section "Device"
Identifier "S3 ViRGE (generic)"
Driver "s3virge"
BoardName "Unknown"
#Option "xaa_benchmark"
#Option "fifo_moderate"
#Option "pci_burst_on"
#Option "pci_retry"
BusID "PCI:1:8:0"
EndSection
# Device 2
Section "Device"
Identifier "card2"
Driver "ati"
BoardName "Unknown"
BusID "PCI:1:6:0"
EndSection
Section "Device"
Identifier "Linux Frame Buffer"
Driver "fbdev"
BoardName "Unknown"
EndSection
# Screen 1
Section "Screen"
Identifier "Screen0"
Device "S3 ViRGE (generic)"
Monitor "Iiyama A701GT, VisionMasterPro 400"
DefaultDepth 8
Subsection "Display"
Depth 8
Modes "640x480"
EndSubSection
EndSection
# Screen 2
Section "Screen"
Identifier "Screen1"
Device "card2"
Monitor "Mitsubishi Diamond Plus 200u (NSH1117)"
DefaultDepth 8
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
#Virtual 640 1152
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
---------------------------------
etienne
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
