Hi there,
I thgt i should also add some observations from my end regarding the DRI and AGP issue. I was atlast able to get my Radeon driver support for my Laptop. Compaq Presario 1720 US, with RH 7.2, Kernel 2.4.7-10, XFree86 CVS Oct 31st 8 MB Video Ram, ATI Radeon Mobility M6 Observations: 1) When i pass "vga=0x305" to my kernel during bootup (in the lilo.conf). No matter what I do, my X never runs if i use a Radeon driver. I had to use Vesa generic driver to get my X running till now. I have also tried with different options available for the "vga" parameter, but X runs only when i choose "vga=1" option (i.e. 80x25). If i do choose to run with "vga=0x305" kernel option and with "radeon" as my driver for the X, then i am only able to get 640x480 screen and that too in a screwed up manner. 2) So i am able to run the X with a radeon support. Here is where i found some bizzare things: * If i set up my X server to a "1024x768x16", i get AGP 4x and also my DRI is enabled. This information was gathered from XFree.0.log, but when i try to run the "glxinfo" it says that my "Direct Rendering : no". Why is it saying so ??? * When i set my X server to "1024x768x24", i get the display but then my AGP and DRI options are ignored while the X starts. In both cases, glxinfo reports that my "DRI" is disabled irrespective of what is shown in XFree.0.log. And glxgears gives me 250-270 fps. Can anyone tell me what should be the ideal number on would expect to see if everything was working, for a Radeon Mobility M6 chip ? So here are my questions: 1) Can i still pass vga=0x305 (or any other option) and still get Radeon support for my card ? If so what resolutions are we talking abt ? 2)Why isn't the DRI and AGP enabled at 1024x768x24 res. ? And why is glxinfo reporting it incorrectly when i see that DRI is enabled in my XFree.0.log (while using 1024x768x16 res) ? 3)What is the typical fps reported from "glxgears" for this videocard ? Lastly, i was never able to get a higher resolution to work for me unlike what Jean has reported.I will send in log files if someone is curious. Seasons Greetings :)) regards reddy -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jean-Marc Valin Sent: Friday, December 21, 2001 3:25 PM To: Michel Dänzer Cc: [EMAIL PROTECTED] Subject: Re: [Xpert]No AGP and DRI with ATI Radeon Mobility M6 > Just "/dev/agpgart support" is not enough, you also have to select > support for your chipset, but maybe all available support is enabled by > default. OK, I finally got AGP to work, using *only* CONFIG_AGP_INTEL. And I got DRI working at 1280x1024. Unfortunately, I can't get it to work at 1400x1050 (SXGA+), which is my normal LCD resolution. It complains that it can't allocate 8663 kB of memory, which is normal since I only have 8 MB video memory. Is there any way to "save some memory" so that I could get DRI @ 1400x1050? Thanks, Jean-Marc _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert