I'm running Redhat 7.2 (and so XFree86 with Redhat's patches: 4.1.0-3)
on a Dell Inspiron 4100 with an SXGA+ display and the ATI Radeon
Mobility; in the XFree86 log, it's listed as:

  (--) PCI:*(1:0:0) ATI Radeon Mobility M6 LW rev 0, Mem @
  0xe0000000/27, 0xfcff0000/16, I/O @ 0xc000/8

  (--) Chipset ATI Radeon Mobility LY (AGP) found

When I run the machine without an external monitor, things work fine,
both with and without X.  When I connect an external monitor (or
projector), with a resolution of 1024x786, and use Fn-F8 to drive the
external monitor only (in X, first setting the resolution to
1024x768), things work fine.

But a problem occurs when I try to drive the LCD and external monitor
simultaneously: the image on the LCD is fine, but the external monitor
is being driven (according to the monitor diagnostics) at
1280x1024. This happens no matter whether I'm running X or not, and
varying the resolutions in X doesn't seem to have an impact on what
resolution the external monitor is driven at.  Since the monitor only
supports at most 1024x768, some of the pixels in both dimensions are
being lost, and, when I use a projector, the quality is poor.
Unfortunately, I no longer have Windows running on my machine, so it
would be difficult to check whether the problem is Linux specific.

I'd be very grateful for any information or advice about what is going
on here.  Even though it doesn't appear to be an X-specific problem,
I've included my XFree86 logs below.  I only really care how things
work under X, so if there is a way of compensating for this problem in
X, I'd be very interested in that, too.

Allen Stoughton
[EMAIL PROTECTED]

------------------------------------------------------------------------------
Log, starting X with projector already plugged in, with 1024x768 mode
------------------------------------------------------------------------------

XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] 
Build Host: stripples.devel.redhat.com
 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan  7 13:58:34 2002
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) ServerLayout "Layout1"
(**) |-->Screen "Screen1" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "ATI Radeon (generic)"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) XKB: disabled
(++) FontPath set to "/usr/X11R6/lib/X11/fonts/75dpi:unscaled,unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) ATI Radeon Mobility M6 LW rev 0, Mem @ 0xe0000000/27, 0xfcff0000/16, 
I/O @ 0xc000/8
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.0.2
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 4.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
        ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
        ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
        ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
        ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
        ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
        ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
        ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
        ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
        ATI Radeon Mobility LZ (AGP)
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon Mobility LY (AGP) found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility LY (AGP)" (ChipID = 0x4c59)
(--) RADEON(0): Linear framebuffer at 0xe0000000
(--) RADEON(0): MMIO registers at 0xfcff0000
(--) RADEON(0): VideoRAM: 16384 kByte (64-bit DDR SDRAM)
(II) RADEON(0): Primary Display == Type 2
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.2.0
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): I2C device "DDC:ddc2" registered.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) RADEON(0): VESA BIOS detected
(II) RADEON(0): VESA VBE DDC supported
(==) RADEON(0): Write-combining range (0xe0000000,0x1000000)
(II) RADEON(0): Detected panel size: 1400x1050
(II) RADEON(0): PLL parameters: rf=2700 rd=60 min=12000 max=35000; xclk=16600
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(--) RADEON(0): Virtual size is 1024x768 (pitch 1040)
(**) RADEON(0): Mode "1024x768"
(**) RADEON(0): Display dimensions: (285, 215) mm
(**) RADEON(0): DPI set to (91, 90)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) RADEON(0): Depth moves disabled by default
(--) Depth 24 pixmap format is 32 bpp
(==) RADEON(0): Write-combining range (0xe0000000,0x1000000)
/lib/modules/2.4.7-10/kernel/drivers/char/agp/agpgart.o: init_module: No such device
/lib/modules/2.4.7-10/kernel/drivers/char/agp/agpgart.o: insmod 
/lib/modules/2.4.7-10/kernel/drivers/char/agp/agpgart.o failed
/lib/modules/2.4.7-10/kernel/drivers/char/agp/agpgart.o: insmod agpgart failed
[drm] failed to load kernel module "agpgart"
(II) RADEON(0): [drm] loaded kernel module "radeon"
(II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:0:0"
(II) RADEON(0): [drm] added 4096 byte SAREA at 0xd08bf000
(II) RADEON(0): [drm] mapped SAREA 0xd08bf000 to 0x40017000
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(EE) RADEON(0): [agp] AGP not available
(EE) RADEON(0): [drm] failed to remove DRM signal handler
(II) RADEON(0): [drm] removed 1 reserved context for kernel
DRIUnlock called when not locked
(II) RADEON(0): [drm] unmapping 4096 bytes of SAREA 0xd08bf000 at 0x40017000
(II) RADEON(0): Memory manager initialized to (0,0) (1040,4032)
(II) RADEON(0): Reserved area from (0,768) to (1040,770)
(II) RADEON(0): Largest offscreen area available: 1040 x 3262
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Dashed Lines
        Scanline Image Writes
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                18 256x256 slots
                6 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): Using hardware cursor (scanline 3080)
(II) RADEON(0): Largest offscreen area available: 1040 x 3260
(II) RADEON(0): Direct rendering disabled
(**) Mouse0: Protocol: "PS/2"
(**) Mouse0: Core Pointer
(==) Mouse0: Buttons: 3
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)

------------------------------------------------------------------------------
Log, starting X without projector plugged in, with 1400x1050 mode
------------------------------------------------------------------------------

XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] 
Build Host: stripples.devel.redhat.com
 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan  7 14:01:28 2002
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "ATI Radeon (generic)"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) XKB: disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) ATI Radeon Mobility M6 LW rev 0, Mem @ 0xe0000000/27, 0xfcff0000/16, 
I/O @ 0xc000/8
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.0.2
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 4.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
        ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
        ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
        ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
        ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
        ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
        ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
        ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
        ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
        ATI Radeon Mobility LZ (AGP)
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon Mobility LY (AGP) found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility LY (AGP)" (ChipID = 0x4c59)
(--) RADEON(0): Linear framebuffer at 0xe0000000
(--) RADEON(0): MMIO registers at 0xfcff0000
(--) RADEON(0): VideoRAM: 16384 kByte (64-bit DDR SDRAM)
(II) RADEON(0): Primary Display == Type 2
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.2.0
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): I2C device "DDC:ddc2" registered.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) RADEON(0): VESA BIOS detected
(II) RADEON(0): VESA VBE DDC supported
(==) RADEON(0): Write-combining range (0xe0000000,0x1000000)
(II) RADEON(0): Detected panel size: 1400x1050
(II) RADEON(0): PLL parameters: rf=2700 rd=60 min=12000 max=35000; xclk=16600
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(--) RADEON(0): Virtual size is 1400x1050 (pitch 1408)
(**) RADEON(0): Mode "1400x1050"
(**) RADEON(0): Display dimensions: (285, 215) mm
(**) RADEON(0): DPI set to (124, 124)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) RADEON(0): Depth moves disabled by default
(--) Depth 24 pixmap format is 32 bpp
(==) RADEON(0): Write-combining range (0xe0000000,0x1000000)
(WW) RADEON(0): Static buffer allocation failed -- need at least 17325 kB video memory
(II) RADEON(0): Memory manager initialized to (0,0) (1408,2978)
(II) RADEON(0): Reserved area from (0,1050) to (1408,1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 1926
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Dashed Lines
        Scanline Image Writes
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                13 256x256 slots
                5 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): Using hardware cursor (scanline 4208)
(II) RADEON(0): Largest offscreen area available: 1408 x 1924
(II) RADEON(0): Direct rendering disabled
(**) Mouse0: Protocol: "PS/2"
(**) Mouse0: Core Pointer
(==) Mouse0: Buttons: 3
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert

Reply via email to