Peter Kaminski wrote: > > > I'm running XFree86 4.1.0.1 on Debian 2.4.13 (woody). I've got a S3 > Trio3D/2X (86C368) card, and I'm running the s3virge driver. > > DGA full-screen doesn't seem to work, with either Tombs' dga test utility, > or with VMware 3.0 (Debian host, Win98 guest with VMware Tools). I've > tried 15- and 16-bit 1024x768 modes. I'd appreciate any suggestions or > guidance on how to debug it further or get it to work. > > The DGA extension is being loaded -- no omit-DGA directive, and it appears > to be loading in the log: > > <snip> > (II) Loading extension XFree86-DGA > <snip> > S3VDGAInit > S3VDGAInit firstone vpWid=1024, vpHgt=768, Bpp=2, mdbitsPP=16 > <snip> > > When I run the dga util, nothing happens visually to the screen, no matter > which keys I push. It runs very slowly, too -- if I press "q" right after > running it, it takes about 5 seconds to quit. Pushing more keys adds more > seconds. If I push "b" then "q" right after running it, it returns (after > about 11 seconds): > > 1 addr:0x4022a000, width 1024, bank size 4194304, depth 15 planes > Framebuffer write speed: 1083K/s > Framebuffer write speed: 909K/s > > When I run VMware, nothing happens to the screen, and I get a register dump > in the logs: > > S3VMdInit - cr3a: 91 (probe) > S3VMdInit - cr3a: 91 (new) > S3VModeInit dclk=78800 > S3VInitSTREAMS > S3VWriteMode > S3VGEReset sub_stat=1100b000 > S3VWrMode - cr3a: 91 (set 3a) > S3VWrMode - restoring cr3a: 91 (adding 0x80) > S3VGEReset sub_stat=1100b000 > (II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers: > (II) S3VIRGE(0): START register dump ------------------ > Misc Out[3CC] > 2f > > CR[00-2f] > 9f 7f 7f 82 82 8e 1e f5 00 60 00 00 00 00 00 00 > 01 24 ff 00 00 ff 1e c3 ff ff ff ff ff ff ff ff > ff 00 00 00 00 00 00 00 00 00 00 00 00 8a 13 02 > > SR[00-27] > 03 01 0f 00 0e 05 06 07 06 00 02 00 0c 00 00 00 > 42 63 81 40 00 83 00 00 00 00 0c 00 00 00 04 00 > 00 00 c2 36 c2 3d 40 08 > > Gr Cont GR[00-0f] > 00 00 00 00 00 40 05 0f ff f9 fa fb fc fd fe ff > > Att Cont AR[00-1f] > 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f > 41 00 0f 00 00 35 36 37 41 00 0f 00 00 3d 3e 3f > > CR[30-6f] > e1 8c 40 20 00 00 1f 9f 5b bd 95 91 4f 00 2c 00 > 00 04 04 00 00 00 01 fc f9 78 00 ff ff ff c0 c0 > 00 10 90 08 00 10 00 00 13 f0 00 00 00 00 40 40 > 05 05 05 08 08 10 99 34 ff e0 c0 01 09 01 ff f8 > > (II) S3VIRGE(0): END register dump -------------------- > > Any help appreciated... > > Pete
What are your driver options? What does a full log file look like? -- Kevin _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
