I picked up a second Voodoo3 card today (ontop of my other PCI one and an AGP Matrox G400 DH), and was about ready to set it up to work in XFree86-4.1.0 (havent installed 4.2 yet, will test it there as well in a while).
Unfortunatly, it seems that int10 was unable to softboot the second voodoo3 (at PCI:0:19:0). It would boot the first just fine (at PCI:0:18:0), even when the first wasn't setup by the bios (my original setting). The second would load perfectly when it was the only PCI video card (both setup/not setup by the bios). XFree86 would still continue to load and allocate memory and screen realestate to the non-booted video card (and I presume draw to it as well, but I'm not quite certain of that.) even though the card wasn't booted, and no signal was being shoved out of it. I suspect that this is just a bug in the int10 module that hasn't been discovered yet because few people are working with 4 heads... but I could be mistaken. (Like the boot signal is being sent to the wrong card as it tries to boot the second card... although it does correctly report a boot failure...) What should I do now? (Has this problem been adressed in 4.2.0 or cvs?) Don Armstrong -- Always try to do things in chronological order. It's less confusing that way. http://www.donarmstrong.com http://www.anylevel.com http://rzlab.ucr.edu _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
