There was a discussion about this in a FreeBSD group a while back,
and somebody posted an excellent summary of it, but i haven't been able
to find the message since ... :-(
in a nutshell, the problem seems to be that the kernel is
allocating some memory for the graphics card, and when the X server
shuts down, it tries to reallcoate more memory, without freeing up the
old stuff, or something along those lines.
The net result is that the graphics subsystem can't access video
memory any more, and you end up with a screwed up display. amazingly
enough, on my Dell C400, I can restart the X server just fine (although
I still can only do 640x480 or 1024 at 8bit colour :-(). Other users
have reported complete siezure of the console ....
My summary is certainly bad, and I'll try to find the real article
again sometime ...
marc.
> -----------------------------
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Subject: [Xpert]Xfree86 4.2.0 and an Intel 830M
> Sent: 02/27/2002 01:12>
>
>
> Hi,
>
> I've been having a problem with Xfree86 4.2.0 and my Intel 830M video
card, X
> works perfectly, until I logout of an X session, upon which my lcd
> hemorrhages, and the entire system locks up. Previously, Xfree would
> hemorrhage at startup, and lock the system, so that I was unable to
use X
> windows at all. I have managed, after a month, to move those symptoms
to the
> end of the session...
>
> How would I go about configuring X, so that it doesn't hemorrhage at
all?
>
> Enclosed are my XF86Config, and test.log
>
> # File generated by xf86config.
>
> #
> # Copyright (c) 1999 by The XFree86 Project, Inc.
> #
> # Permission is hereby granted, free of charge, to any person
obtaining a
> # copy of this software and associated documentation files (the
"Software"),
> # to deal in the Software without restriction, including without
limitation
> # the rights to use, copy, modify, merge, publish, distribute,
sublicense,
> # and/or sell copies of the Software, and to permit persons to whom
the
> # Software is furnished to do so, subject to the following
conditions:
> #
> # The above copyright notice and this permission notice shall be
included in
> # all copies or substantial portions of the Software.
> #
> # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR
> # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY,
> # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL
> # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY,
> # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF
> # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE
> # SOFTWARE.
> #
> # Except as contained in this notice, the name of the XFree86 Project
shall
> # not be used in advertising or otherwise to promote the sale, use or
other
> # dealings in this Software without prior written authorization from
the
> # XFree86 Project.
> #
>
> #
**********************************************************************
> # Refer to the XF86Config(4/5) man page for details about the format
of
> # this file.
> #
**********************************************************************
>
> # This XF86Config file is designed for use with the Linux framebuffer
console.
> # This generic interface should work with nearly all video cards
(although
> # not every card will support every resolution). To use the Linux
framebuffer
> # console, you need to enable these kernel options:
> # Using 'make menuconfig', in 'console drivers', enable:
> # [*] VGA text console
> # [*] Video mode selection support
> # [*] Support for frame buffer devices (EXPERIMENTAL)
> # [*] VESA VGA graphics console
> # [*] Advanced low level driver options
> # <*> 8 bpp packed pixels support
> # <*> 16 bpp packed pixels support
> # <*> 24 bpp packed pixels support
> # <*> 32 bpp packed pixels support
> # <*> VGA characters/attributes support
> # [*] Select compiled-in fonts
> # [*] VGA 8x8 font
> # [*] VGA 8x16 font
> # If you have a Matrox or ATI Mach64, you might try enabling the
options having
> # to do with those cards as well. However, if the card is VESA
compliant, you
> # don't really need to (and it might cause problems, possibly)
> #
> # Next, if this file is not already named /etc/X11/XF86Config, make a
copy
> # with that name. This file ships with the name XF86Config-fbdev to
avoid
> # overwriting an existing config file.
> #
> # To get the kernel to start in VESA framebuffer mode, you need to
pass it
> # a vga= init string at boot time. For example, if you use LILO
you'll
> # probably find a vga=normal string in your /etc/lilo.conf. If you
edit that
> # to one of the values in this table:
> #
> # Colours 640x480 800x600 1024x768 1280x1024 1600x1200
> # --------+---------------------------------------------
> # 256 | 769 771 773 775 796
> # 32,768 | 784 787 790 793 797
> # 65,536 | 785 788 791 794 798
> # 16.8M | 786 789 792 795 799
> #
> # ...such as this for 1024x768x64k:
> # vga = 791
> # and then reinstall LILO by running 'lilo' as root, then at the
next boot
> # Linux should start in a VESA framebuffer console mode.
> #
> # For more information on how to activate the Linux frame buffer, see
> # /usr/src/linux/Documentation/fb/vesafb.txt.
> #
> # Enjoy! :)
> # -- [EMAIL PROTECTED]
> #
>
> #
**********************************************************************
> # Module section -- this section is used to specify
> # which dynamically loadable modules to load.
> #
**********************************************************************
> #
> Section "Module"
>
> # This loads the DBE extension module.
>
> Load "dbe" # Double buffer extension
>
> # This loads the miscellaneous extensions module, and disables
> # initialisation of the XFree86-DGA extension within that module.
> SubSection "extmod"
> Option "omit xfree86-dga" # don't initialise the DGA
extension
> EndSubSection
>
> # This loads the font modules
> Load "type1"
> Load "freetype"
> Load "speedo"
>
> # This loads the GLX module
> Load "glx"
> Load "drm"
> Load "dri"
> EndSection
>
> Section "DRI"
> Mode 0660
> EndSection
>
> #
**********************************************************************
> # Files section. This allows default font and rgb paths to be set
> #
**********************************************************************
>
> Section "Files"
>
> # The location of the RGB database. Note, this is the name of the
> # file minus the extension (like ".txt" or ".db"). There is normally
> # no need to change the default.
>
> RgbPath "/usr/X11R6/lib/X11/rgb"
>
> # Multiple FontPath entries are allowed (which are concatenated
together),
> # as well as specifying multiple comma-separated entries in one
FontPath
> # command (or a combination of both methods)
> #
> # If you don't have a floating point coprocessor and emacs, Mosaic or
other
> # programs take long to start up, try moving the Type1 and Speedo
directory
> # to the end of this list (or comment them out).
> #
>
> FontPath "/usr/X11R6/lib/X11/fonts/local/"
> FontPath "/usr/X11R6/lib/X11/fonts/misc/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
> FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
>
> # The module search path. The default path is shown here.
>
> # ModulePath "/usr/X11R6/lib/modules"
>
> EndSection
>
> #
**********************************************************************
> # Server flags section.
> #
**********************************************************************
>
> Section "ServerFlags"
>
> # Uncomment this to cause a core dump at the spot where a signal is
> # received. This may leave the console in an unusable state, but may
> # provide a better stack trace in the core dump to aid in debugging
>
> # Option "NoTrapSignals"
>
> # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
> # This allows clients to receive this key event.
>
> # Option "DontZap"
>
> # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode
switching
> # sequences. This allows clients to receive these key events.
>
> # Option "Dont Zoom"
>
> # Uncomment this to disable tuning with the xvidtune client. With
> # it the client can still run and fetch card and monitor attributes,
> # but it will not be allowed to change them. If it tries it will
> # receive a protocol error.
>
> # Option "DisableVidModeExtension"
>
> # Uncomment this to enable the use of a non-local xvidtune client.
>
> # Option "AllowNonLocalXvidtune"
>
> # Uncomment this to disable dynamically modifying the input device
> # (mouse and keyboard) settings.
>
> # Option "DisableModInDev"
>
> # Uncomment this to enable the use of a non-local client to
> # change the keyboard or mouse settings (currently only xset).
>
> # Option "AllowNonLocalModInDev"
>
> EndSection
>
> #
**********************************************************************
> # Input devices
> #
**********************************************************************
>
> #
**********************************************************************
> # Core keyboard's InputDevice section
> #
**********************************************************************
>
> Section "InputDevice"
>
> Identifier "Keyboard1"
> Driver "Keyboard"
> # For most OSs the protocol can be omitted (it defaults to
"Standard").
> # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
> # uncomment the following line.
>
> # Option "Protocol" "Xqueue"
>
> Option "AutoRepeat" "500 30"
>
> # Specify which keyboard LEDs can be user-controlled (eg, with
xset(1))
> # Option "Xleds" "1 2 3"
>
> # Option "LeftAlt" "Meta"
> # Option "RightAlt" "ModeShift"
>
> # To customise the XKB settings to suit your keyboard, modify the
> # lines below (which are the defaults). For example, for a non-U.S.
> # keyboard, you will probably want to use:
> # Option "XkbModel" "pc102"
> # If you have a US Microsoft Natural keyboard, you can use:
> # Option "XkbModel" "microsoft"
> #
> # Then to change the language, change the Layout setting.
> # For example, a german layout can be obtained with:
> # Option "XkbLayout" "de"
> # or:
> # Option "XkbLayout" "de"
> # Option "XkbVariant" "nodeadkeys"
> #
> # If you'd like to switch the positions of your capslock and
> # control keys, use:
> # Option "XkbOptions" "ctrl:swapcaps"
>
> # These are the default XKB settings for XFree86
> # Option "XkbRules" "xfree86"
> # Option "XkbModel" "pc101"
> # Option "XkbLayout" "us"
> # Option "XkbVariant" ""
> # Option "XkbOptions" ""
>
> # Option "XkbDisable"
>
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc101"
> Option "XkbLayout" "us"
>
> EndSection
>
>
> #
**********************************************************************
> # Core Pointer's InputDevice section
> #
**********************************************************************
>
> Section "InputDevice"
>
> # Identifier and driver
>
> Identifier "Mouse1"
> Driver "mouse"
> # The available mouse protocols types that you can set below are:
> # Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
> # Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
> # MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
> # ThinkingMouse ThinkingMousePS/2 Xqueue
> Option "Protocol" "PS/2"
> Option "Device" "/dev/mouse"
> # Option "Device" "/dev/psaux"
> # Option "Device" "/dev/ttyS0"
> # Option "Device" "/dev/ttyS1"
>
> # When using XQUEUE, comment out the above two lines, and uncomment
> # the following line.
>
> # Option "Protocol" "Xqueue"
>
> # Baudrate and SampleRate are only for some Logitech mice. In
> # almost every case these lines should be omitted.
>
> # Option "BaudRate" "9600"
> # Option "SampleRate" "150"
>
> # Emulate3Buttons is an option for 2-button Microsoft mice
> # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
>
> # Option "Emulate3Buttons"
> # Option "Emulate3Timeout" "50"
>
> # ChordMiddle is an option for some 3-button Logitech mice
>
> # Option "ChordMiddle"
>
> EndSection
>
>
> #
**********************************************************************
> # Other input device sections
> # this is optional and is required only if you
> # are using extended input devices. This is for example only. Refer
> # to the XF86Config man page for a description of the options.
> #
**********************************************************************
> #
> # Section "InputDevice"
> # Identifier "Mouse2"
> # Driver "mouse"
> # Option "Protocol" "MouseMan"
> # Option "Device" "/dev/mouse2"
> # EndSection
> #
> # Section "InputDevice"
> # Identifier "spaceball"
> # Driver "magellan"
> # Option "Device" "/dev/cua0"
> # EndSection
> #
> # Section "InputDevice"
> # Identifier "spaceball2"
> # Driver "spaceorb"
> # Option "Device" "/dev/cua0"
> # EndSection
> #
> # Section "InputDevice"
> # Identifier "touchscreen0"
> # Driver "microtouch"
> # Option "Device" "/dev/ttyS0"
> # Option "MinX" "1412"
> # Option "MaxX" "15184"
> # Option "MinY" "15372"
> # Option "MaxY" "1230"
> # Option "ScreenNumber" "0"
> # Option "ReportingMode" "Scaled"
> # Option "ButtonNumber" "1"
> # Option "SendCoreEvents"
> # EndSection
> #
> # Section "InputDevice"
> # Identifier "touchscreen1"
> # Driver "elo2300"
> # Option "Device" "/dev/ttyS0"
> # Option "MinX" "231"
> # Option "MaxX" "3868"
> # Option "MinY" "3858"
> # Option "MaxY" "272"
> # Option "ScreenNumber" "0"
> # Option "ReportingMode" "Scaled"
> # Option "ButtonThreshold" "17"
> # Option "ButtonNumber" "1"
> # Option "SendCoreEvents"
> # EndSection
>
> #
**********************************************************************
> # Monitor section
> #
**********************************************************************
>
> # Any number of monitor sections may be present
>
> Section "Monitor"
>
> Identifier "My Monitor"
>
> # HorizSync is in kHz unless units are specified.
> # HorizSync may be a comma separated list of discrete values, or a
> # comma separated list of ranges of values.
> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
> # USER MANUAL FOR THE CORRECT NUMBERS.
>
> HorizSync 31.5 - 50.0
>
> # HorizSync 30-64 # multisync
> # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
> # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
>
> # VertRefresh is in Hz unless units are specified.
> # VertRefresh may be a comma separated list of discrete values, or a
> # comma separated list of ranges of values.
> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
> # USER MANUAL FOR THE CORRECT NUMBERS.
>
> VertRefresh 40-90
>
> EndSection
>
>
> #
**********************************************************************
> # Graphics device section
> #
**********************************************************************
>
> # Any number of graphics device sections may be present
>
> Section "Device"
> Identifier "Intel 830"
> Driver "i810"
> #VideoRam 4096
> # Insert Clocks lines here if appropriate
> EndSection
>
> #
**********************************************************************
> # Screen sections
> #
**********************************************************************
>
> # Any number of screen sections may be present. Each describes
> # the configuration of a single screen. A single specific screen
section
> # may be specified from the X server command line with the "-screen"
> # option.
> Section "Screen"
> Identifier "Screen 1"
> Device "Intel 830"
> Monitor "My Monitor"
>
> # You shouldn't need to set a default depth as the server will use
> # whatever the framebuffer is set to. If you insist on setting it,
make
> # sure it matches the setting for your framebuffer.
> DefaultDepth 24
>
> Subsection "Display"
> Depth 8
> Modes "1024x768" "1280x1024
> EndSubsection
> Subsection "Display"
> Depth 16
> Modes "1024x768" "1280x1024"
> EndSubsection
> Subsection "Display"
> Depth 24
> Modes "1280x1024" "1024x768"
> EndSubsection
> Subsection "Display"
> Depth 32
> Modes "1024x768" "128004x1024"
> EndSubsection
>
> EndSection
>
> #
**********************************************************************
> # ServerLayout sections.
> #
**********************************************************************
>
> # Any number of ServerLayout sections may be present. Each describes
> # the way multiple screens are organised. A specific ServerLayout
> # section may be specified from the X server command line with the
> # "-layout" option. In the absence of this, the first section is
used.
> # When now ServerLayout section is present, the first Screen section
> # is used alone.
>
> Section "ServerLayout"
>
> # The Identifier line must be present
> Identifier "Simple Layout"
>
> # Each Screen line specifies a Screen section name, and optionally
> # the relative position of other screens. The four names after
> # primary screen name are the screens to the top, bottom, left and
right
> # of the primary screen. In this example, screen 2 is located to the
> # right of screen 1.
>
> Screen "Screen 1"
>
> # Each InputDevice line specifies an InputDevice section name and
> # optionally some options to specify the way the device is to be
> # used. Those options include "CorePointer", "CoreKeyboard" and
> # "SendCoreEvents".
>
> InputDevice "Mouse1" "CorePointer"
> InputDevice "Keyboard1" "CoreKeyboard"
>
> EndSection
>
>
>
> XFree86 Version 4.2.0 / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 18 January 2002
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/)
> Build Operating System: Linux 2.4.9-13smp i686 [ELF]
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??)
unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Wed Feb 27 00:07:09
2002
> (==) Using config file: "/etc/X11/XF86Config"
> (WW) I810: No matching Device section for instance (BusID PCI:0:2:1)
found
> (EE) I810(0): [dri] DRIScreenInit failed. Disabling DRI.
> Xlib: extension "RENDER" missing on display ":0.0".
> LD_LIBRARY_PATH=/opt/kde/lib
> kdeinit: Launched DCOPServer, pid = 172 result = 0
> DCOPServer: SetAProc_loc: conn 0, prot=local, file=/tmp/.ICE-unix/174
> DCOP: register 'anonymous-172' -> number of clients is now 1
> DCOPServer up and running.
> DCOP: unregister 'anonymous-172'
> DCOP: number of clients is now down to 0
> kdeinit: Launched KLauncher, pid = 175 result = 0
> DCOP: register 'klauncher' -> number of clients is now 1
> DCOP: register 'anonymous-175' -> number of clients is now 2
> DCOP: new daemon klauncher
> DCOP: unregister 'anonymous-175'
> DCOP: number of clients is now down to 0
> kdeinit: Launched KDED, pid = 177 result = 0
> DCOP: register 'kded' -> number of clients is now 1
> DCOP: register 'anonymous-177' -> number of clients is now 2
> kded: Does not exist! (/home/enoch/.kde/share/servicetypes/)
> DCOP: register 'anonymous-178' -> number of clients is now 3
> kio (KLauncher): KLauncher: Got kdeinit_exec_wait('kbuildsycoca',
..)
> KInit: Got EXEC 'kbuildsycoca' from klauncher.
> kio (KLauncher): kbuildsycoca (pid 179) up and running.
> DCOP: register 'kbuildsycoca' -> number of clients is now 4
> kbuildsycoca: Recreating ksycoca file
> DCOP: register 'anonymous-170' -> number of clients is now 5
> DCOP: unregister 'anonymous-170'
> DCOP: number of clients is now down to 4
> DCOP: register 'ksplash' -> number of clients is now 5
> kio (KSycoca): KSycocaDict: 155 entries.
> kio (KSycoca): KSycocaDict: 61 entries.
> kio (KSycoca): KSycocaDict: 4 entries.
> kio (KSycoca): KSycocaDict: 465 entries.
> kio (KSycoca): KSycocaDict: 465 entries.
> kio (KSycoca): KSycocaDict: 465 entries.
> kio (KSycoca): KSycocaDict: 13 entries.
> kio (KSycoca): KSycocaDict: 30 entries.
> kbuildsycoca: endOfData : 5db61
> kbuildsycoca: Build = 1s Save = 1s
> kdeinit: PID 179 terminated.
> DCOP: unregister 'kbuildsycoca'
> DCOP: number of clients is now down to 4
> DCOP: unregister 'anonymous-178'
> DCOP: number of clients is now down to 3
> DCOP: new daemon kded
> kdeinit: PID 177 terminated.
> kdeinit: opened connection to :0.0
> DCOP: unregister 'anonymous-177'
> DCOP: number of clients is now down to 1
> kdeinit: Launched 'kcminit', pid = 180 result = 0
> Xlib: extension "RENDER" missing on display ":0.0".
> DCOP: register 'anonymous-180' -> number of clients is now 2
> Initializing libkcm_arts: init_arts
> kdeinit: Got SETENV 'KDE_DISPLAY=:0.0' from klauncher.
> kio (KLauncher): KLauncher: Got kdeinit_exec('artsd', ...)
> KInit: Got EXEC 'artsd' from klauncher.
> library=artsd.la: No file names artsd.la found in paths.
> Could not load library! Trying exec....
> kio (KLauncher): artsd (pid 181) up and running.
> kdecore (KLibLoader): closing library libkcm_arts
> kdecore (KLibLoader): Deleting KLibrary 0x8080ae0 libkcm_arts
> kdecore (KLibLoader): library libkcm_kmix.la not found under 'module'
but
> under 'lib'
> kcminit: Initializing libkcm_kmix: init_kmix
> kdeinit: Got SETENV 'KDE_DISPLAY=:0.0' from klauncher.
> kio (KLauncher): KLauncher: Got
> start_service_by_desktop_name('kmixctrl_restore', ...)
> KInit: Got EXEC 'kmixctrl' from klauncher.
> kio (KLauncher): kmixctrl (pid 182) up and running.
> kdecore (KLibLoader): closing library libkcm_kmix
> kdecore (KLibLoader): Deleting KLibrary 0x8081528 libkcm_kmix
> kdecore (KLibLoader): Will not unload libkcm_energy
> kcminit: Initializing libkcm_energy: init_energy
> Xlib: extension "RENDER" missing on display ":0.0".
> kdecore (KLibLoader): closing library libkcm_energy
> kdecore (KLibLoader): Deleting KLibrary 0x80884d0 libkcm_energy
> kdecore (KLibLoader): library libkcm_layout.la not found under
'module' but
> under 'lib'
> kdeinit: PID 182 terminated.
> kcminit: Initializing libkcm_layout: init_layout
> kdecore (KLibLoader): closing library libkcm_layout
> kdecore (KLibLoader): Deleting KLibrary 0x8088c00 libkcm_layout
> kdecore (KLibLoader): library libkcm_laptop.la not found under
'module' but
> under 'lib'
> kcminit: Initializing libkcm_laptop: init_battery
> kdecore (KLibLoader): closing library libkcm_laptop
> kdecore (KLibLoader): Deleting KLibrary 0x80894a0 libkcm_laptop
> kdecore (KLibLoader): library libkcm_xmlrpcd.la not found under
'module' but
> under 'lib'
> kcminit: Initializing libkcm_xmlrpcd: init_xmlrpcd
> kdeinit: Got SETENV 'KDE_DISPLAY=:0.0' from klauncher.
> kio (KLauncher): KLauncher: Got
start_service_by_desktop_name('kxmlrpcd', ...)
> KInit: Got EXEC 'kxmlrpcd' from klauncher.
> kio (KLauncher): kxmlrpcd (pid 183) up and running.
> kdecore (KLibLoader): closing library libkcm_xmlrpcd
> kdecore (KLibLoader): Deleting KLibrary 0x8089630 libkcm_xmlrpcd
> DCOP: register 'kxmlrpcd' -> number of clients is now 3
> DCOP: register 'anonymous-183' -> number of clients is now 4
> DCOP: unregister 'anonymous-183'
> DCOP: number of clients is now down to 3
> kdeinit: PID 183 terminated.
> kcminit: Initializing libkcm_input: init_keyboard
> kdecore (KLibLoader): closing library libkcm_input
> kdecore (KLibLoader): Deleting KLibrary 0x808cbc8 libkcm_input
> kcminit: Initializing libkcm_access: init_access
> kdecore (KLibLoader): closing library libkcm_access
> kdecore (KLibLoader): Deleting KLibrary 0x808cd10 libkcm_access
> kdecore (KLibLoader): library libkcm_nsplugin.la not found under
'module' but
> under 'lib'
> kcminit: Initializing libkcm_nsplugin: init_nsplugin
> kdecore (KLibLoader): closing library libkcm_nsplugin
> kdecore (KLibLoader): Deleting KLibrary 0x808da98 libkcm_nsplugin
> kcminit: Initializing libkcm_style: init_style
>
> [artsd] ** Warning ** unix_connect: can't connect to server
> (unix:/tmp/mcop-enoch/eruditorum_localdomain-00c4-3c7bab99)
> There are already artsd objects registered, looking if they are
active...
> kdecore (KLibLoader): closing library libkcm_style
> kdecore (KLibLoader): Deleting KLibrary 0x808e150 libkcm_style
> kdeinit: Got SETENV
>
'GTK_RC_FILES=/etc/gtk/gtkrc:/home/enoch/.gtkrc:/home/enoch/.gtkrc-kde'
from
> klauncher.
> kdeinit: Got SETENV 'KDE_MULTIHEAD=false' from klauncher.
> kdeinit: Got SETENV 'QT_XFT=0' from klauncher.
> kcminit: Initializing libkcm_bell: init_bell
> kdecore (KLibLoader): closing library libkcm_bell
> kdecore (KLibLoader): Deleting KLibrary 0x808e718 libkcm_bell
> kdecore (KLibLoader): Deleting KLibLoader 0x807ade0 unnamed
> DCOP: unregister 'anonymous-180'
> DCOP: number of clients is now down to 2
> kdeinit: PID 180 terminated.
>
> [artsd] ** Warning ** unix_connect: can't connect to server
> (unix:/tmp/mcop-enoch/eruditorum_localdomain-00c4-3c7bab99)
>
> [artsd] ** Warning ** unix_connect: can't connect to server
> (unix:/tmp/mcop-enoch/eruditorum_localdomain-00c4-3c7bab99)
>
> [artsd] ** Warning ** unix_connect: can't connect to server
> (unix:/tmp/mcop-enoch/eruditorum_localdomain-00c4-3c7bab99)
>
> [artsd] ** Warning ** unix_connect: can't connect to server
> (unix:/tmp/mcop-enoch/eruditorum_localdomain-00c4-3c7bab99)
> .... cleaned 4 unused mcop global references.
>
> DCOP: register 'knotify' -> number of clients is now 3
> DCOP: register 'anonymous-190' -> number of clients is now 4
> Xlib: extension "RENDER" missing on display ":0.0".
> DCOP: new daemon knotify
> DCOP: unregister 'anonymous-190'
> DCOP: number of clients is now down to 2
> Xlib: extension "RENDER" missing on display ":0.0".
> DCOP: register 'ksmserver' -> number of clients is now 3
> kdeinit: Got SETENV
'SESSION_MANAGER=local/eruditorum:/tmp/.ICE-unix/192' from
> klauncher.
> KSMServer: SetAProc_loc: conn 0, prot=local, file=/tmp/.ICE-unix/192
> QSocketNotifier: Multiple socket notifiers for same socket 6 and type
read
> KSMServer::restoreSession
> kio (KLauncher): KLauncher: Got exec_blind('kwin', ...)
> KInit: Got EXEC 'kwin' from klauncher.
> kio (KLauncher): kwin (pid 193) up and running.
> Xlib: extension "RENDER" missing on display ":0.0".
> DCOP: register 'anonymous-193' -> number of clients is now 4
> DCOP: unregister 'anonymous-193'
> DCOP: number of clients is now down to 3
> DCOP: register 'anonymous-193' -> number of clients is now 4
> DCOP: unregister 'anonymous-193'
> DCOP: number of clients is now down to 3
> DCOP: register 'kwin' -> number of clients is now 4
> klauncher: KLauncher::process ---> autoStart
> KInit: Got EXEC 'kdesktop' from klauncher.
> kio (KLauncher): kdesktop (pid 194) up and running.
> DCOP: register 'kdesktop' -> number of clients is now 5
> DCOP: register 'anonymous-194' -> number of clients is now 6
> Xlib: extension "RENDER" missing on display ":0.0".
> relPath=System/ScreenSavers/
> kdesktop: Reading saver: Rubik.desktop
> kdesktop: Saver-exec: kxsrun rubik -- -root
> kdesktop: Saver Engine started
> kdesktop: KDesktop constructor -> workAreaChanged
> kdesktop: KDesktop::workAreaChanged() -> starting timer
> kdesktop: KDesktop::slotStart
> libkonq: KonqIconViewWidget::setIcons( 0 , )
> kio (KDirLister): KDirLister::openURL file:/home/enoch/Desktop/
keep=false
> kdesktop: KDesktop::slotStarted
> libkonq: KNewMenu::KNewMenu 0x80e78a0
> libkonq: KBookmarkMenu::KBookmarkMenu 0x80ea868 address :
> libkonq: KBookmarkManager::parse
> /home/enoch/.kde/share/apps/konqueror/bookmarks.xml
> kdesktop: KRootWm::initConfig
> kdesktop: KRootWm::buildMenus
> kdeinit: PID 194 terminated.
> KInit: Got EXEC 'kicker' from klauncher.
> DCOP: unregister 'anonymous-194'
> DCOP: number of clients is now down to 5
> kio (KLauncher): kicker (pid 196) up and running.
> DCOP: register 'kicker' -> number of clients is now 6
> DCOP: register 'anonymous-196' -> number of clients is now 7
> kio (Slave): createSlave for file:/home/enoch/Desktop/
> kio (KLauncher): requestSlave file
> kio (KLauncher): KLauncher::requestSlave for file: looking for a
slave
> handling file
> kio (KLauncher): KLauncher: launching new slave kio_file with
protocol=file
> KInit: Got EXEC 'kio_file' from klauncher.
> Xlib: extension "RENDER" missing on display ":0.0".
> kio_file: Starting 198
> kio (KLauncher): kio_file (pid 198) up and running.
> kio (KLauncher): Slave launched, pid = 198
> kio (KLauncher): requestSlave got pid 198
> kio (Slave): PID of slave = 198
> kdesktop: KDesktop::updateWorkArea wr: 0,0 1024x768
> kdesktop: resizeContents 1024x768
> kio (Slave): slave has connected to application
> kio (kioslave): setHost( host = )
> kicker: ContainerArea::loadContainerConfig()
> kio_file: ========= LIST file:/home/enoch/Desktop/ =========
> kio (kioslave): listEntries 6
> kio_file: ============= COMPLETED LIST ============
> kio_file: =============== BYE ===========
> kio (Slave): got answer 10
> libkonq: KonqIconViewWidget::setIcons( 0 , )
> kdesktop: KDesktop::slotCompleted 0 1
> kicker: RecentlyLaunchedApps::init
> libkonq: KBookmarkMenu::KBookmarkMenu 0x80b5d80 address :
> libkonq: KBookmarkManager::parse
> /home/enoch/.kde/share/apps/konqueror/bookmarks.xml
> kicker: ExtensionManager::loadContainerConfig()
> kicker: ContainerArea::configure()
> libkonq: KBookmarkMenu::KBookmarkMenu 0x80b5d80 address :
> kicker: Panel sets new strut.
> kdesktop: KDesktop::workAreaChanged() -> starting timer
> kdeinit: PID 196 terminated.
> KInit: Got EXEC 'klipper' from klauncher.
> DCOP: unregister 'anonymous-196'
> DCOP: number of clients is now down to 6
> kio (KLauncher): klipper (pid 199) up and running.
> KInit: Got EXEC 'khotkeys' from klauncher.
> DCOP: register 'klipper' -> number of clients is now 7
> DCOP: register 'anonymous-199' -> number of clients is now 8
> kio (KLauncher): khotkeys (pid 201) up and running.
> KInit: Got EXEC 'kwrited' from klauncher.
> DCOP: register 'khotkeys' -> number of clients is now 9
> kdesktop: KDesktop::updateWorkArea wr: 30,0 994x768
> kdesktop: resizeContents 994x768
> DCOP: register 'anonymous-201' -> number of clients is now 10
> Xlib: extension "RENDER" missing on display ":0.0".
> DCOP: unregister 'anonymous-201'
> DCOP: number of clients is now down to 9
> kio (KLauncher): kwrited (pid 203) up and running.
> kio (KLauncher): KLauncher: Got exec_blind('kmix', ...)
> kdeinit: PID 201 terminated.
> KInit: Got EXEC 'kmix' from klauncher.
> library=kmix.la: No file names kmix.la found in paths.
> Could not load library! Trying exec....
> Xlib: extension "RENDER" missing on display ":0.0".
> DCOP: register 'kwrited' -> number of clients is now 10
> DCOP: register 'anonymous-203' -> number of clients is now 11
> kio (KLauncher): kmix (pid 205) up and running.
> kio (KLauncher): KLauncher: Got exec_blind('xmms', ...)
> KInit: Got EXEC 'xmms' from klauncher.
> library=xmms.la: No file names xmms.la found in paths.
> Could not load library! Trying exec....
> Xlib: extension "RENDER" missing on display ":0.0".
> kio (KLauncher): xmms (pid 206) up and running.
> DCOP: new daemon kwrited
> DCOP: unregister 'anonymous-199'
> DCOP: number of clients is now down to 9
> kdeinit: PID 199 terminated.
> DCOP: register 'kmix' -> number of clients is now 10
> DCOP: register 'anonymous-205' -> number of clients is now 11
> kdeinit: PID 203 terminated.
> DCOP: unregister 'anonymous-203'
> DCOP: number of clients is now down to 10
> Xlib: extension "RENDER" missing on display ":0.0".
> kdeinit: PID 205 terminated.
> DCOP: unregister 'anonymous-205'
> DCOP: number of clients is now down to 9
> DCOP: unregister 'ksplash'
> DCOP: number of clients is now down to 8
> kio (KService*): WARNING: The desktop entry file
> /opt/kde/share/applnk/System/konsole.desktop has no Name
> kdeinit: Got SETENV 'KDE_INITIAL_DESKTOP=1' from klauncher.
> kdeinit: Got SETENV 'KDE_DISPLAY=:0.0' from klauncher.
> kio (KLauncher): KLauncher: Got
>
start_service_by_desktop_path('/opt/kde/share/applnk/System/konsole.desk
top',
> ....)
> kio (KService*): WARNING: The desktop entry file
> /opt/kde/share/applnk/System/konsole.desktop has no Name
> KInit: Got EXEC 'konsole' from klauncher.
> kio (KLauncher): konsole (pid 212) up and running.
> Xlib: extension "RENDER" missing on display ":0.0".
> DCOP: register 'anonymous-212' -> number of clients is now 9
> QObject::connect: Cannot connect KAction::activated() to
Konsole::(null)
> konsole: Got new color list
> konsole: Checking for new schemas
> konsole: Updating time stamps
> konsole: Looking for schema
> /opt/kde/share/apps/konsole/BlackOnLightYellow.schema
> konsole: Found new schema
/opt/kde/share/apps/konsole/BlackOnLightYellow.schema
> konsole: Rereading schema file
> /opt/kde/share/apps/konsole/BlackOnLightYellow.schema
> konsole: Looking for schema
/opt/kde/share/apps/konsole/BlackOnWhite.schema
> konsole: Found new schema
/opt/kde/share/apps/konsole/BlackOnWhite.schema
> konsole: Rereading schema file
/opt/kde/share/apps/konsole/BlackOnWhite.schema
> konsole: Looking for schema
/opt/kde/share/apps/konsole/DarkPicture.schema
> konsole: Found new schema
/opt/kde/share/apps/konsole/DarkPicture.schema
> konsole: Rereading schema file
/opt/kde/share/apps/konsole/DarkPicture.schema
> konsole: Looking for schema
/opt/kde/share/apps/konsole/GreenOnBlack.schema
> konsole: Found new schema
/opt/kde/share/apps/konsole/GreenOnBlack.schema
> konsole: Rereading schema file
/opt/kde/share/apps/konsole/GreenOnBlack.schema
> konsole: Looking for schema
/opt/kde/share/apps/konsole/GreenTint.schema
> konsole: Found new schema
/opt/kde/share/apps/konsole/GreenTint.schema
> konsole: Rereading schema file
/opt/kde/share/apps/konsole/GreenTint.schema
> konsole: Looking for schema
/opt/kde/share/apps/konsole/GreenTint_MC.schema
> konsole: Found new schema
/opt/kde/share/apps/konsole/GreenTint_MC.schema
> konsole: Rereading schema file
/opt/kde/share/apps/konsole/GreenTint_MC.schema
> konsole: Looking for schema
/opt/kde/share/apps/konsole/LightPicture.schema
> konsole: Found new schema
/opt/kde/share/apps/konsole/LightPicture.schema
> konsole: Rereading schema file
/opt/kde/share/apps/konsole/LightPicture.schema
> konsole: Looking for schema /opt/kde/share/apps/konsole/Linux.schema
> konsole: Found new schema /opt/kde/share/apps/konsole/Linux.schema
> konsole: Rereading schema file
/opt/kde/share/apps/konsole/Linux.schema
> konsole: Looking for schema
/opt/kde/share/apps/konsole/Transparent.schema
> konsole: Found new schema
/opt/kde/share/apps/konsole/Transparent.schema
> konsole: Rereading schema file
/opt/kde/share/apps/konsole/Transparent.schema
> konsole: Looking for schema
/opt/kde/share/apps/konsole/Transparent_MC.schema
> konsole: Found new schema
/opt/kde/share/apps/konsole/Transparent_MC.schema
> konsole: Rereading schema file
> /opt/kde/share/apps/konsole/Transparent_MC.schema
> konsole: Looking for schema
> /opt/kde/share/apps/konsole/Transparent_lightbg.schema
> konsole: Found new schema
> /opt/kde/share/apps/konsole/Transparent_lightbg.schema
> konsole: Rereading schema file
> /opt/kde/share/apps/konsole/Transparent_lightbg.schema
> konsole: Looking for schema
/opt/kde/share/apps/konsole/WhiteOnBlack.schema
> konsole: Found new schema
/opt/kde/share/apps/konsole/WhiteOnBlack.schema
> konsole: Rereading schema file
/opt/kde/share/apps/konsole/WhiteOnBlack.schema
> konsole: Looking for schema /opt/kde/share/apps/konsole/XTerm.schema
> konsole: Found new schema /opt/kde/share/apps/konsole/XTerm.schema
> konsole: Rereading schema file
/opt/kde/share/apps/konsole/XTerm.schema
> konsole: Looking for schema
/opt/kde/share/apps/konsole/syscolor.schema
> konsole: Found new schema /opt/kde/share/apps/konsole/syscolor.schema
> konsole: Rereading schema file
/opt/kde/share/apps/konsole/syscolor.schema
> konsole: Looking for schema /opt/kde/share/apps/konsole/vim.schema
> konsole: Found new schema /opt/kde/share/apps/konsole/vim.schema
> konsole: Rereading schema file /opt/kde/share/apps/konsole/vim.schema
> konsole: Updating schema menu with 16 items.
> konsole: Looking for schema /opt/kde/share/apps/konsole/Linux.schema
> konsole: Checking schema file
/opt/kde/share/apps/konsole/Linux.schema
> konsole: Checking menu items
> konsole: Remembering schema data
> konsole: Stopping transparency
> konsole: Doing the rest
> konsole: Looking for schema /opt/kde/share/apps/konsole/Linux.schema
>
> waiting for X server to shut down DCOP: unregister 'knotify'
> DCOP: unregister 'kwin'
> DCOP: number of clients is now down to 8
> ICE default IO error handler doing an exit(), pid = 206, errno = 0
> ICE default IO error handler doing an exit(), pid = 207, errno = 0
> ICE default IO error handler doing an exit(), pid = 202, errno = 0
> ICE default IO error handler doing an exit(), pid = 200, errno = 0
> ICE default IO error handler doing an exit(), pid = 197, errno = 0
> DCOP: unregister 'kicker'
> DCOP: number of clients is now down to 7
> DCOP: unregister 'klipper'
> DCOP: number of clients is now down to 6
> DCOP: unregister 'khotkeys'
> DCOP: number of clients is now down to 5
> DCOP: unregister 'kmix'
> DCOP: number of clients is now down to 4
> DCOP: unregister 'ksmserver'
> DCOP: number of clients is now down to 3
> kdeinit: Fatal IO error: client killed
> kdeinit: sending SIGHUP to children.
> kdeinit: sending SIGTERM to children.
> kdeinit: Exit.
> KLauncher: Exiting on signal 15
> DCOP: unregister 'kded'
> DCOP: unregister 'kxmlrpcd'
> DCOP: number of clients is now down to 2
> DCOP: unregister 'klauncher'
> DCOP: unregister 'kwrited'
>
>
> xinit: unexpected signal 1.
>
> _______________________________________________
> Xpert mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xpert
>
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
