Hi
Not sure if this is an X problem. Can do 1024x768 with another
monitor and same Trio card but not this Apple 1705 that I
acquired recently. Have tried numerous modelines and modeline
calculators but on 800x600 and above just get varying degrees of
blizzard effects.
Also cannot get higher than 600x480 on windows either - same effect
occurs.
Could this be a faulty monitor?
Thanx for any suggestions.
Please see parts of XF86Config and the "X.out" below
--
Eric Smith
XF86Config
==========
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
Section "ServerFlags"
EndSection
Section "Keyboard"
Protocol "Standard"
AutoRepeat 500 30
XkbKeymap "xfree86(us)"
EndSection
Section "Pointer"
Protocol "Microsoft"
Device "/dev/mouse"
ChordMiddle
EndSection
Section "Monitor"
Identifier "Apple Multiscan 1705 (only cookin at 600x480)"
VendorName "db"
ModelName "bg"
HorizSync 30-65
VertRefresh 50-120
Mode "640x480"
DotClock 25.175
HTimings 640 664 760 800
VTimings 480 491 493 525
EndMode
Modeline "faq" 85 1024 1032 1152 1360 768 784 787 823
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
Mode "web"
DotClock 75.75
Htimings 1024 1048 1128 1264
Vtimings 768 771 774 799
EndMode
# 800x600 @ 75Hz, 46.80 kHz hsync
Mode "800x600 @ 75Hz"
DotClock 44.18
HTimings 800 816 864 944
VTimings 600 602 604 624
EndMode
# 800x600 @ 60Hz, 37.20 kHz hsync
Mode "800x600 @60Hz"
DotClock 32.74
HTimings 800 808 848 880
VTimings 600 602 604 620
EndMode
EndSection
Section "Device"
Identifier "Trio32/64"
#VideoRam 1024
# Clockchip "s3_sdac"
EndSection
Section "Screen"
Driver "accel"
Device "Trio32/64"
Monitor "Apple Multiscan 1705 (only cookin at 600x480)"
Subsection "Display"
Depth 8
Modes "640x480" "800x600 @60Hz" "800x600 @75Hz"
ViewPort 0 0
#Virtual 1024 768
Virtual 800 600
#Virtual 640 480
EndSubsection
EndSection
EndSection
X.out
======
Operating System: Linux 2.4.13 i686 [ELF]
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
newmmio, mmio_928, s3_generic
(using VT number 9)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3, Chorded middle button
(**) S3: Graphics device ID: "Trio32/64"
(**) S3: Monitor ID: "Apple Multiscan 1705 (only cookin at 600x480)"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"
[2] 2965
(--) S3: PCI: Trio32/64 rev 0, Linear FB @ 0xff000000
(--) S3: chipset: Trio64 rev. 20
(--) S3: chipset driver: mmio_928
(--) S3: card type: PCI
(--) S3: Diamond Stealth BIOS found
(--) S3: videoram: 1024k
(--) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135 MHz
(--) S3: Using Trio32/64 programmable clock (MCLK 59.957 MHz)
(--) S3: Maximum allowed dot-clock: 135.000 MHz
(**) S3: Mode "640x480": mode clock = 25.175
(**) S3: Mode "800x600 @60Hz": mode clock = 32.740
(--) S3: There is no mode definition named "800x600 @75Hz"
(--) S3: Removing mode "800x600 @75Hz" from list of valid modes.
(--) S3: Using 6 bits per RGB value
(**) S3: Virtual resolution set to 800x600
(--) S3: Local bus LAW is 0xFF000000
(--) S3: Using a banksize of 1024k, line width of 800
(--) S3: Using a single 64x64 area at (736,602) for expanding pixmaps
(--) S3: Using 8 planes of 736x708 at (0,602) aligned 8 as font cache
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
