On Sun, 24 Mar 2002, Ian Truelsen wrote:
> I have been trying to get this working for a while but without much luck,
> and I was advised that this list would be the place to go for an answer.
>
> What I would like to know is whether it is possible to get the xvideo
> overlay extension working in both screens of a xinerama setup? And if so,
> could you give me some advise on how to get it functioning?
>
> Here is my hardware: Voodoo 3 3000 AGP and ATI Xpert 98 PCI (reports as Rage
> XL chipset) If this needs to be updated/replaced, I would have no problem,
> but could you let me know what hardware is most likely to work?
>
> I am using XFree 4.2.0 with a January 18, 2002 build date. My linux kernel
> is 2.4.18.
>
> I am able to get either head to overlay individually, however only the
> primary (screen1) will work when xinerama is set up. I am including my
> current XF86Config file below, in case someone can see something that I have
> done incorrectly.
>
If in a non-Xinerama multihead situation the overlay on each
head works individually, then it should work in Xinerama.
When you say you were able to get either head to work, was
that with both cards running simultaneouly in a non-Xinerama
multihead mode?
Mark.
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
