Hello,
One last problem in my XFree86.0.log. r182 is complaining about not being able to
determine panel dimensions, and none specified. How can I specify the required panel
dimensions, and how do I determine what that specification should be?
Here's a clip from my XFree86.0.log that talks about the subject.
************** START CLIP **************
(**) R128(0): Depth 16, (--) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 RF (AGP)" (ChipID = 0x5246)
(--) R128(0): Linear framebuffer at 0xd4000000
(--) R128(0): MMIO registers at 0xd9000000
(--) R128(0): VideoRAM: 16384 kByte (64-bit SDR SGRAM 2:1)
(WW) R128(0): Can't determine panel dimensions, and none specified.
Disabling programming of FP registers.
************** END CLIP **************
--
Mark LaPierre
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
