Hi, J. Grant. I think most laptops have options in their bios about that, particularly the power management menus.
If you're running acpid, I think the laptop lid acts like another button. Just some starters. -- Derek. ----- Original Message ----- From: "J. Grant" <[EMAIL PROTECTED]> To: "xpert" <[EMAIL PROTECTED]> Sent: Wednesday, May 15, 2002 1:19 AM Subject: [Xpert]How to stop a laptop going into standby when i close the lid? > Hello, not sure if this got though, i could not find it on the mailing > list log. > > Has anyone any thoughts on how to get this working please? > > JG > > -------- Original Message -------- > Subject: How to stop a laptop going into standby when i close the lid? > Date: Mon, 13 May 2002 17:11:59 +0900 > From: "J. Grant" <[EMAIL PROTECTED]> > To: xpert <[EMAIL PROTECTED]> > > Hi, > Could someone tell me how can I stop a laptop going into standby when i > close the lid? > > I checked apm but could not find this option that triggers the whole > process, could someone point me to the file that contains this > ON_LID_CLOSE=/usr/bin/apm suspend now > or similar command please? I can not find it in the bios. Another OS can > disable it... > > JG > > I have tired the following > > server flags section > > Option "NoPM" "boolean" > > Monitor section > > Option "DPMS" "off" > > and > > Section "Device" > > Option "power_saver" > > > > All with no luck, it still 'Saves to RAM' > In the bios i had it on custom with each one disabled, now i have it > just on all disabled instead of custom. > > occasionall it does not go off, which is odd, but every time while i > have been testing today it has. > > I dont want to cut off the switch and then leave the screen light on, i > would like to just close the lid for carrying around the office, but it > goes into suspend each time tho.. > > > --- > Laptop Adagio (38W2) Same as DELL Inspiron 7500 > > > Chipset: "ATI Rage 128 Mobility LF (AGP)" (ChipID = 0x4c46) > ATI Mobility 128 AGP 2X (English) > ASIC Mobility 128 > ASIC ID 4c46 > Bios 004.039.064.023 > Date 31/8/2000 > Tuner Type: Philips FI1236 MK1 NTSC M/C > Tuner Type: BT819 > > Linear framebuffer at 0xf8000000 > MMIO registers at 0xf4100000 > VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1) SDRAM > > Using flat panel for display > Panel size: 1400x1050 > Panel ID: IBM ITSX93 > Panel Type: Color, Single, TFT > Panel Interface: LVDS > PLL parameters: rf=2700 rd=60 min=12500 max=25000; xclk=10500 > Resolutions supported > 1600 x 1200 but not all visible. > 1400 x 1050 full > 1280 x 1024 > 1024 x 768 > all 32 or 16 bpp or 256 > no 24bit mode > > ---------------------------------------------------------------------------- ---- > > XFree86 Version 4.1.0 / X Window System > (protocol Version 11, revision 0, vendor release 6510) > Release Date: 2 June 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) > Build Operating System: Linux 2.4.8-5mdkenterprise i686 [ELF] > Module Loader present > (==) Log file: "/var/log/XFree86.0.log", Time: Mon May 13 16:47:52 2002 > (==) Using config file: "/etc/X11/XF86Config-4" > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) ServerLayout "2" > (**) |-->Screen "screen1" (0) > (**) | |-->Monitor "Generic|Generic Monitor, 1600x1200 @ 70 Hz" > (**) | |-->Device "ATI Rage 128 Mobility" > (**) |-->Input Device "mouse2" > (**) |-->Input Device "Keyboard1" > (**) Option "AutoRepeat" "250 30" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc105" > (**) XKB: model: "pc105" > (**) Option "XkbLayout" "gb" > (**) XKB: layout: "gb" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to "unix/:-1" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (**) Option "NoPM" "1" > (--) using VT number 7 > > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.4 > XFree86 XInput driver : 0.2 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.2 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00 > (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01 > (II) PCI: 00:04:0: chip 104c,ac51 card 0000,0000 rev 00 class 06,07,00 hdr 82 > (II) PCI: 00:04:1: chip 104c,ac51 card 0000,0000 rev 00 class 06,07,00 hdr 82 > (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80 > (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 > (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 > (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 03 class 06,80,00 hdr 00 > (II) PCI: 00:08:0: chip 125d,1978 card 14c0,0011 rev 10 class 04,01,00 hdr 00 > (II) PCI: 00:10:0: chip 11c1,0450 card 144f,4005 rev 00 class 07,80,00 hdr 00 > (II) PCI: 01:00:0: chip 1002,4c46 card 14c0,0011 rev 02 class 03,00,00 hdr 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) PCI-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x8c (VGA_EN is set) > (II) Bus 1 I/O range: > [0] -1 0x00002000 - 0x000020ff (0x100) IX[B] > [1] -1 0x00002400 - 0x000024ff (0x100) IX[B] > [2] -1 0x00002800 - 0x000028ff (0x100) IX[B] > [3] -1 0x00002c00 - 0x00002cff (0x100) IX[B] > (II) Bus 1 non-prefetchable memory range: > [0] -1 0xf4100000 - 0xf41fffff (0x100000) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B] > (--) PCI:*(1:0:0) ATI Rage 128 Mobility LF rev 2, Mem @ 0xf8000000/26, 0xf4100000/14, I/O @ 0x2000/8 > (II) Addressable bus resource ranges are > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0xf4000000 - 0xf40000ff (0x100) MX[B] > [1] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [2] -1 0xf4100000 - 0xf4103fff (0x4000) MX[B](B) > [3] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) > [4] -1 0x00001800 - 0x000018ff (0x100) IX[B] > [5] -1 0x00001080 - 0x00001087 (0x8) IX[B] > [6] -1 0x00001400 - 0x000014ff (0x100) IX[B] > [7] -1 0x00001060 - 0x0000107f (0x20) IX[B] > [8] -1 0x00001090 - 0x0000109f (0x10) IX[B] > [9] -1 0x00002000 - 0x000020ff (0x100) IX[B](B) > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0xf4000000 - 0xf40000ff (0x100) MX[B] > [1] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [2] -1 0xf4100000 - 0xf4103fff (0x4000) MX[B](B) > [3] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) > [4] -1 0x00001800 - 0x000018ff (0x100) IX[B] > [5] -1 0x00001080 - 0x00001087 (0x8) IX[B] > [6] -1 0x00001400 - 0x000014ff (0x100) IX[B] > [7] -1 0x00001060 - 0x0000107f (0x20) IX[B] > [8] -1 0x00001090 - 0x0000109f (0x10) IX[B] > [9] -1 0x00002000 - 0x000020ff (0x100) IX[B](B) > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xf4000000 - 0xf40000ff (0x100) MX[B] > [6] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [7] -1 0xf4100000 - 0xf4103fff (0x4000) MX[B](B) > [8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) > [9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [10] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [11] -1 0x00001800 - 0x000018ff (0x100) IX[B] > [12] -1 0x00001080 - 0x00001087 (0x8) IX[B] > [13] -1 0x00001400 - 0x000014ff (0x100) IX[B] > [14] -1 0x00001060 - 0x0000107f (0x20) IX[B] > [15] -1 0x00001090 - 0x0000109f (0x10) IX[B] > [16] -1 0x00002000 - 0x000020ff (0x100) IX[B](B) > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading sub module "GLcore" > (II) LoadModule: "GLcore" > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Module GLcore: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension GLX > (II) LoadModule: "dri" > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a > (II) Module dri: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading sub module "drm" > (II) LoadModule: "drm" > (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a > (II) Module drm: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension XFree86-DRI > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.1.9 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font FreeType > (II) LoadModule: "r128" > (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o > (II) Module r128: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 4.0.1 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.4 > (II) LoadModule: "ati" > (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o > (II) Module ati: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 6.3.6 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.4 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.2 > (II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga > (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), > ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), > ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP), > ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP), > ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP), > ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI), > ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), > ATI Rage 128 Mobility ML (AGP) > (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), > ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), > ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP), > ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP), > ATI Radeon Mobility LZ (AGP) > (II) Primary Device is: PCI 01:00:0 > (--) Assigning device section with no busID to primary device > (--) Chipset ATI Rage 128 Mobility LF (AGP) found > (II) Loading sub module "r128" > (II) LoadModule: "r128" > (II) Reloading /usr/X11R6/lib/modules/drivers/r128_drv.o > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xf4000000 - 0xf40000ff (0x100) MX[B] > [6] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [7] -1 0xf4100000 - 0xf4103fff (0x4000) MX[B](B) > [8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) > [9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [10] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [11] -1 0x00001800 - 0x000018ff (0x100) IX[B] > [12] -1 0x00001080 - 0x00001087 (0x8) IX[B] > [13] -1 0x00001400 - 0x000014ff (0x100) IX[B] > [14] -1 0x00001060 - 0x0000107f (0x20) IX[B] > [15] -1 0x00001090 - 0x0000109f (0x10) IX[B] > [16] -1 0x00002000 - 0x000020ff (0x100) IX[B](B) > (II) resource ranges after probing: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xf4000000 - 0xf40000ff (0x100) MX[B] > [6] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [7] -1 0xf4100000 - 0xf4103fff (0x4000) MX[B](B) > [8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) > [9] 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [10] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [11] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [13] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [14] -1 0x00001800 - 0x000018ff (0x100) IX[B] > [15] -1 0x00001080 - 0x00001087 (0x8) IX[B] > [16] -1 0x00001400 - 0x000014ff (0x100) IX[B] > [17] -1 0x00001060 - 0x0000107f (0x20) IX[B] > [18] -1 0x00001090 - 0x0000109f (0x10) IX[B] > [19] -1 0x00002000 - 0x000020ff (0x100) IX[B](B) > [20] 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [21] 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) R128(0): PCI bus 1 card 0 func 0 > (**) R128(0): Depth 16, (--) framebuffer bpp 16 > (II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps) > (==) R128(0): Default visual is TrueColor > (**) R128(0): Option "AGPMode" "1" > (**) R128(0): Option "UseCCEfor2D" "false" > (==) R128(0): RGB weight 565 > (II) R128(0): Using 6 bits per RGB (8 bit DAC) > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) R128(0): initializing int10 > (II) R128(0): Primary V_BIOS segment is: 0xc000 > (--) R128(0): Chipset: "ATI Rage 128 Mobility LF (AGP)" (ChipID = 0x4c46) > (--) R128(0): Linear framebuffer at 0xf8000000 > (--) R128(0): MMIO registers at 0xf4100000 > (--) R128(0): VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1) > (**) R128(0): Using flat panel for display > (II) R128(0): Panel size: 1400x1050 > (II) R128(0): Panel ID: IBM ITSX93 > (II) R128(0): Panel Type: Color, Single, TFT > (II) R128(0): Panel Interface: LVDS > (II) R128(0): PLL parameters: rf=2700 rd=60 min=12500 max=25000; xclk=10500 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) R128(0): VESA BIOS detected > (II) R128(0): VESA VBE Version 2.0 > (II) R128(0): VESA VBE Total Mem: 16384 kB > (II) R128(0): VESA VBE OEM: ATI MOBILE M3 > (II) R128(0): VESA VBE OEM Software Rev: 1.0 > (II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc. > (II) R128(0): VESA VBE OEM Product: M3 > (II) R128(0): VESA VBE OEM Product Rev: 01.00 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Reloading /usr/X11R6/lib/modules/libddc.a > (II) R128(0): VESA VBE DDC supported > (II) R128(0): VESA VBE DDC Level none > (II) R128(0): VESA VBE DDC transfer in appr. 2 sec. > (II) R128(0): VESA VBE DDC read failed > (==) R128(0): Using gamma correction (1.0, 1.0, 1.0) > (II) R128(0): Generic|Generic Monitor, 1600x1200 @ 70 Hz: Using hsync range of 31.50-88.00 kHz > (II) R128(0): Generic|Generic Monitor, 1600x1200 @ 70 Hz: Using vrefresh range of 50.00-90.00 Hz > (II) R128(0): Clock range: 12.50 to 250.00 MHz > (II) R128(0): Not using mode "1024x480" (no mode of this name) > (II) R128(0): Not using mode "768x576" (no mode of this name) > (II) R128(0): Not using mode "768x576" (no mode of this name) > (II) R128(0): Not using default mode "640x350" (vrefresh out of range) > (II) R128(0): Not using default mode "720x400" (no mode of this name) > (II) R128(0): Not using default mode "640x480" (hsync out of range) > (II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) > (II) R128(0): Not using default mode "1024x768" (vrefresh out of range) > (II) R128(0): Not using default mode "1152x864" (no mode of this name) > (II) R128(0): Not using default mode "1280x960" (no mode of this name) > (II) R128(0): Not using default mode "1280x960" (no mode of this name) > (II) R128(0): Not using default mode "1280x1024" (hsync out of range) > (II) R128(0): Not using default mode "1600x1200" (no mode of this name) > (II) R128(0): Not using default mode "1600x1200" (no mode of this name) > (II) R128(0): Not using default mode "1600x1200" (no mode of this name) > (II) R128(0): Not using default mode "1600x1200" (no mode of this name) > (II) R128(0): Not using default mode "1600x1200" (no mode of this name) > (II) R128(0): Not using default mode "1792x1344" (no mode of this name) > (II) R128(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) > (II) R128(0): Not using default mode "1856x1392" (no mode of this name) > (II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) > (II) R128(0): Not using default mode "1920x1440" (no mode of this name) > (II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) > (II) R128(0): Not using default mode "1400x1050" (hsync out of range) > (II) R128(0): Not using mode "1600x1200" (no mode of this name) > (--) R128(0): Virtual size is 1280x1024 (pitch 1280) > (**) R128(0): Default mode "1280x1024": 108.0 MHz, 86.1 kHz, 82.8 Hz > (II) R128(0): Modeline "1280x1024" 108.00 1280 1328 1342 1568 1024 1025 1028 1040 +hsync +vsync > (**) R128(0): Default mode "1024x768": 108.0 MHz, 60.1 kHz, 76.6 Hz > (II) R128(0): Modeline "1024x768" 108.00 1024 1072 1086 1312 768 769 772 784 +hsync +vsync > (**) R128(0): Default mode "800x600": 108.0 MHz, 51.7 kHz, 84.0 Hz > (II) R128(0): Modeline "800x600" 108.00 800 848 862 1088 600 600 603 616 +hsync +vsync > (**) R128(0): Default mode "640x480": 108.0 MHz, 38.8 kHz, 78.2 Hz > (II) R128(0): Modeline "640x480" 108.00 640 688 702 928 480 480 483 496 -hsync -vsync > (==) R128(0): DPI set to (75, 75) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.1 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.4 > (**) R128(0): Using AGP 1x mode > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0xf4100000 - 0xf4103fff (0x4000) MS[B] > [1] 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B] > [2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [5] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [7] -1 0xf4000000 - 0xf40000ff (0x100) MX[B] > [8] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] > [9] -1 0xf4100000 - 0xf4103fff (0x4000) MX[B](B) > [10] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) > [11] 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [14] 0 0x00002000 - 0x000020ff (0x100) IS[B] > [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [16] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [17] -1 0x00001800 - 0x000018ff (0x100) IX[B] > [18] -1 0x00001080 - 0x00001087 (0x8) IX[B] > [19] -1 0x00001400 - 0x000014ff (0x100) IX[B] > [20] -1 0x00001060 - 0x0000107f (0x20) IX[B] > [21] -1 0x00001090 - 0x0000109f (0x10) IX[B] > [22] -1 0x00002000 - 0x000020ff (0x100) IX[B](B) > [23] 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [24] 0 0x000003c0 - 0x000003df (0x20) IS[B] > (==) R128(0): Write-combining range (0xf8000000,0x1000000) > (WW) R128(0): Cannot read colourmap from VGA. Will restore with default > (II) R128(0): [drm] created "r128" driver at busid "PCI:1:0:0" > (II) R128(0): [drm] added 4096 byte SAREA at 0xd1943000 > (II) R128(0): [drm] mapped SAREA 0xd1943000 to 0x40027000 > (II) R128(0): [drm] framebuffer handle = 0xf8000000 > (II) R128(0): [drm] added 1 reserved context for kernel > (II) R128(0): [agp] Mode 0x1f000201 [AGP 0x8086/0x7190; Card 0x1002/0x4c46] > (II) R128(0): [agp] 8192 kB allocated with handle 0xd1945000 > (II) R128(0): [agp] ring handle = 0xe0000000 > (II) R128(0): [agp] Ring mapped at 0x4124f000 > (II) R128(0): [agp] ring read ptr handle = 0xe0101000 > (II) R128(0): [agp] Ring read ptr mapped at 0x40028000 > (II) R128(0): [agp] vertex/indirect buffers handle = 0xe0102000 > (II) R128(0): [agp] Vertex/indirect buffers mapped at 0x41350000 > (II) R128(0): [agp] AGP texture map handle = 0xe0302000 > (II) R128(0): [agp] AGP Texture map mapped at 0x41550000 > (II) R128(0): [drm] register handle = 0xf4100000 > (II) R128(0): [dri] Visual configs initialized > (II) R128(0): CCE in BM mode > (II) R128(0): Using 8 MB AGP aperture > (II) R128(0): Using 1 MB for the ring buffer > (II) R128(0): Using 2 MB for vertex/indirect buffers > (II) R128(0): Using 5 MB for AGP textures > (II) R128(0): Memory manager initialized to (0,0) (1280,4096) > (II) R128(0): Reserved area from (0,1024) to (1280,1026) > (II) R128(0): Largest offscreen area available: 1280 x 3070 > (II) R128(0): Reserved back buffer from (0,1026) to (1280,2050) > (II) R128(0): Reserved depth buffer from (0,2050) to (1280,3075) > (II) R128(0): Reserved depth span from (0,3074) offset 0x781400 > (II) R128(0): Reserved 6144 kb for textures at offset 0xa00000 > (==) R128(0): Backing store disabled > (==) R128(0): Silken mouse enabled > (II) R128(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Lines > Dashed Lines > Scanline Image Writes > Offscreen Pixmaps > Setting up tile and stipple cache: > 32 128x128 slots > 9 256x256 slots > (II) R128(0): Acceleration enabled > (II) R128(0): Using hardware cursor (scanline 6150) > (II) R128(0): Largest offscreen area available: 1280 x 1019 > (WW) R128(0): Option "power_saver" is not used > (WW) R128(0): Option "DPMS" is not used > (II) R128(0): X context handle = 0x00000001 > (II) R128(0): [drm] installed DRM signal handler > (II) R128(0): [DRI] installation complete > (II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers > (II) R128(0): [drm] Mapped 128 vertex/indirect buffers > (II) R128(0): Direct rendering enabled > (II) Setting vga for screen 0. > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (**) Option "Protocol" "IMPS/2" > (**) mouse2: Protocol: "IMPS/2" > (**) Option "CorePointer" > (**) mouse2: Core Pointer > (**) Option "Device" "/dev/mouse" > (==) mouse2: Buttons: 3 > (**) Option "ZAxisMapping" "4 5" > (**) mouse2: ZAxisMapping: buttons 4 and 5 > (II) Keyboard "Keyboard1" handled by legacy driver > (II) XINPUT: Adding extended input device "mouse2" (type: MOUSE) > _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
