On Tue, 11 Jun 2002, Jeffery S. Norman wrote:
> Hmmm, my GeForce 4 MX 440 (VisionTek) works beautifully under 4.2.0 under
> Linux ... so unless there are real differences in the server code between
> FreeBSD and Linux, I would expect this to work.
Only the early board revisions work with the 4.2 "nv" driver, which
were all I had access to at the time. After 4.2 I found that the nv
driver was too simple to support many if not most of the newer NV17
boards. All should work in CVS, however.
Mark.
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
> Of Mark Vojkovich
> Sent: Tuesday, June 11, 2002 4:39 PM
> To: XFree86 mailing list
> Subject: Re: [Xpert]Geforce4 MX 440
>
>
> On Tue, 11 Jun 2002, Stephen Wenzler wrote:
>
> > does 4.2.0. supports Geforce4 MX 440 video card?
>
> GeForce4 cards aren't likely to work properly with 4.2.0.
> They should work fine in XFree86 CVS, however.
>
>
> Mark.
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
