Hi,
I'm having a problem with XFree86 4.2.0 and my Thinkpad A20p
(mobility 128 m3). X only recognizes my two highest resolutions:
1400x1050 and 1280x1024. All the lower resolutions get tossed
due to either hsync or vrefresh out of range.
I've been running Linux and XFree86 on this notebook for 2 years
now, and all X versions since 4.0.1 have worked great. My
current setup is with Mandrake 8.2 and its stock 4.2.0 packages.
I experience the same problem with a stock RedHat 7.3 install. I
re-installed XFree86 4.1.0 to verify that everything still works
correctly under the old version...it does.
Now I have managed to get all my resolutions working by setting
insanely high upper bounds for the hsync and vrefresh. As I
increase the values, lower and lower resolutions become available
(inverse relationship). Finally, after bumping both the upper
bounds well beyond 200 all the resolutions are available again.
But my LCD panel is normally set to run with an hsync of 31.5-90
and a vrefresh of 50-100. Is my computer going to explode if I
use these ridiculous settings?
Thanks for any help!
-jwd
------------ /var/log/XFree86.0.log excert ---------------
[...]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) R128(0): PCI bus 1 card 0 func 0
(**) R128(0): Depth 16, (--) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp
pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "AGPMode" "1"
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) R128(0): initializing int10 (nil)
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Mobility LF (AGP)" (ChipID =
0x4c46)
(--) R128(0): Linear framebuffer at 0xf8000000
(--) R128(0): MMIO registers at 0xf0200000
(--) R128(0): VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using flat panel for display
(II) R128(0): Panel size: 1400x1050
(II) R128(0): Panel ID: IBM ITSX93
(II) R128(0): Panel Type: Color, Single, TFT
(II) R128(0): Panel Interface: LVDS
(II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=25000;
xclk=10500
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 16384 kB
(II) R128(0): VESA VBE OEM: ATI MOBILE M3
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: M3
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level none
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read failed
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): Generic|Generic Laptop Display Panel 1400x1050:
Using hsync range
of 31.50-90.00 kHz
(II) R128(0): Generic|Generic Laptop Display Panel 1400x1050:
Using vrefresh ran
ge of 50.00-100.50 Hz
(II) R128(0): Clock range: 12.50 to 250.00 MHz
(II) R128(0): Not using mode "1024x480" (no mode of this name)
(II) R128(0): Not using mode "768x576" (no mode of this name)
(II) R128(0): Not using mode "768x576" (no mode of this name)
(II) R128(0): Not using default mode "640x350" (hsync out of
range)
(II) R128(0): Not using default mode "320x175" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "640x400" (hsync out of
range)
(II) R128(0): Not using default mode "320x200" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "720x400" (no mode of this
name)
(II) R128(0): Not using default mode "360x200" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "640x480" (hsync out of
range)
(II) R128(0): Not using default mode "320x240" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "640x480" (hsync out of
range)
(II) R128(0): Not using default mode "320x240" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "640x480" (hsync out of
range)
(II) R128(0): Not using default mode "320x240" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "640x480" (hsync out of
range)
(II) R128(0): Not using default mode "320x240" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "800x600" (hsync out of
range)
(II) R128(0): Not using default mode "400x300" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "800x600" (hsync out of
range)
(II) R128(0): Not using default mode "400x300" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "800x600" (hsync out of
range)
(II) R128(0): Not using default mode "400x300" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "800x600" (hsync out of
range)
(II) R128(0): Not using default mode "400x300" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "800x600" (hsync out of
range)
(II) R128(0): Not using default mode "400x300" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1024x768" (bad mode
clock/interlace/double
scan)
(II) R128(0): Not using default mode "512x384" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of
range)
(II) R128(0): Not using default mode "512x384" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of
range)
(II) R128(0): Not using default mode "512x384" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of
range)
(II) R128(0): Not using default mode "512x384" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1024x768" (vrefresh out of
range)
(II) R128(0): Not using default mode "512x384" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1152x864" (no mode of this
name)
(II) R128(0): Not using default mode "576x432" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1280x960" (no mode of this
name)
(II) R128(0): Not using default mode "640x480" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1280x960" (no mode of this
name)
(II) R128(0): Not using default mode "640x480" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "640x512" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "640x512" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1280x1024" (hsync out of
range)
(II) R128(0): Not using default mode "640x512" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1600x1200" (no mode of this
name)
(II) R128(0): Not using default mode "800x600" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1600x1200" (no mode of this
name)
(II) R128(0): Not using default mode "800x600" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1600x1200" (no mode of this
name)
(II) R128(0): Not using default mode "800x600" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1600x1200" (no mode of this
name)
(II) R128(0): Not using default mode "800x600" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1600x1200" (no mode of this
name)
(II) R128(0): Not using default mode "800x600" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1792x1344" (no mode of this
name)
(II) R128(0): Not using default mode "896x672" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doubl
escan)
(II) R128(0): Not using default mode "896x672" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1856x1392" (no mode of this
name)
(II) R128(0): Not using default mode "928x696" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doubl
escan)
(II) R128(0): Not using default mode "928x696" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1920x1440" (no mode of this
name)
(II) R128(0): Not using default mode "960x720" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doubl
escan)
(II) R128(0): Not using default mode "960x720" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "832x624" (no mode of this
name)
(II) R128(0): Not using default mode "416x312" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "700x525" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1400x1050" (hsync out of
range)
(II) R128(0): Not using default mode "700x525" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using default mode "1600x1024" (no mode of this
name)
(II) R128(0): Not using default mode "800x512" (bad mode
clock/interlace/doubles
can)
(II) R128(0): Not using mode "1152x864" (no mode of this name)
(II) R128(0): Not using mode "1024x768" (no mode of this name)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(II) R128(0): Not using mode "640x480" (no mode of this name)
(--) R128(0): Virtual size is 1400x1050 (pitch 1408)
(**) R128(0): Default mode "1400x1050": 108.0 MHz, 72.3 kHz, 67.8
Hz
(II) R128(0): Modeline "1400x1050" 108.00 1400 1448 1462 1688
1050 1050 1053
1066 +hsync +vsync
(**) R128(0): Default mode "1280x1024": 108.0 MHz, 86.1 kHz, 82.8
Hz
(II) R128(0): Modeline "1280x1024" 108.00 1280 1328 1342 1568
1024 1025 1028
1040 +hsync +vsync
(**) R128(0): Display dimensions: (304, 228) mm
(**) R128(0): DPI set to (116, 116)
=====
= Joseph W. Dixon -- [EMAIL PROTECTED]
=====
"A common mistake that people make when trying to design
something completely foolproof was to underestimate the
ingenuity of complete fools" -- Douglas Adams
__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
