James H. Cloos Jr. wrote: >>>>>>"Fabrice" == Fabrice Bellet <[EMAIL PROTECTED]> writes: >>>>>> > >>the FireGL driver does not enable bus mastering on the graphics card, but >>this is essential. So you have to do before starting the Xserver with setpci >>by setting bit 2 of the command register- >> > > Fabrice> Wow it works, and it's damn fast! > > Fabrice> glxgears gives these results : > > Fabrice> 11305 frames in 5.0 seconds = 2261.000 FPS > Fabrice> 14153 frames in 5.0 seconds = 2830.600 FPS > Fabrice> 14106 frames in 5.0 seconds = 2821.200 FPS > Fabrice> 14142 frames in 5.0 seconds = 2828.400 FPS > Fabrice> 13498 frames in 5.0 seconds = 2699.600 FPS > Fabrice> 2121 frames in 5.0 seconds = 424.200 FPS > Fabrice> 2119 frames in 5.0 seconds = 423.800 FPS > > Fabrice> The last two values are obtained in full screen 1024x768. > > That is a significant improvement over the 7500 M7 LW which gives: > > [default size] > 4293 frames in 5.0 seconds = 858.600 FPS > 4626 frames in 5.0 seconds = 925.200 FPS > 4723 frames in 5.0 seconds = 944.600 FPS > 4703 frames in 5.0 seconds = 940.600 FPS > 4722 frames in 5.0 seconds = 944.400 FPS > 3048 frames in 5.0 seconds = 609.600 FPS
The tcl driver on dri.sf.net gives me 2200 FPS on a 7500 if I turn on page flipping. Did I meantion gears wasn't a good benchmark? Keith _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
