Hi everybody,
I recently got an embedded computer (Intel CPU) with a Savage4/IX
chipset. The board had both a CRT and an LCD connector.
I would like to be able to turn the LCD backlight on and off. The
backlight inverter has an enable input, and the LCD connector on the
board has a ENABLK signal.
I haven't been able to find any information about that signal, but I
suppose it comes directly from the Savage4/IX chip.
I looked in the savage driver code, and found nothing related to the
backlight.
Could someone tell me if backlight support for the Savage4/IX chipset is
implemented ? If so, where in the XFree86 code, and if not, does anyone
have enough information (maybe the Savage4/IX datasheet) to implement
such support ?
I can code, but need technical specifications of the chip, and some help
about the XFree86 architecture as I'm quite new to this.
Thanks in advance for your help.
Laurent Pinchart
--
VisioFlex *Laurent Pinchart*
Visio/Flex/ Development Engineer - Capflow S.A.
40, Chemin de la Procession - B-7000 Mons - Belgium
Tel : +32 65 321 000 - Fax : +32 65 847 215
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
