This really just sounds like a poor quality cable between the
monitor and the video card. Was the same cable used in both cases?
Mark.
On Thu, 11 Jul 2002, andre duarte bueno wrote:
> I Brazilian.
>
> I use a monitor SUN 0567, 21 inch
> in one workstation SUN enterprise e450 and video board elite 3D.
> and in
> a PC with a video board riva tnt ultra2 32mb.
> Using Linux/RedHat 7.3, Xfree 4.2
>
> ENTERPRISE PC/LINUX/REDHAT73
> | |
> | |
> \ /
> MONITOR 21"
> model: sun 0567
>
> I conect the monitor Sun 21"
> to enterprise (input 1) and to PC (input 2)
> this is ok, and run.
>
> But in PC the image apear duplicated (shaded)
> (To present a shadow or image of; to shadow forth; to represent.)
>
> When I click in on screem menu the resolution apear
> Modes On screen resolution Apearence
> "1600x1200" 93.8Khz and 75Hz. bad - shadon's
> "1400x1050" 91.1Khz and 85Hz. bad - shadon's
> "1280x1024" 77.4Khz and 85Hz. bad - shadon's
> "1152x864" Khz and 85Hz. bad - shadon's
> "1024x768" 687Khz and 85Hz. bad - shadon's
> "800x600" 53.8Khz and 85Hz. good - ok
>
>
> this is suported by monitor and by video card,
> what is the problem ?
>
> How I set the configuration correctly do this monitor/Video ?
> Thanks for your interest
>
> report to [EMAIL PROTECTED]
>
> _______________________________________________
> Xpert mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xpert
>
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
