Hi List,
we have two machines with identical software environments but little
difference in the hardware configuration.
Hardware configuration differs as following:
Machine1 Machine2
Motherboard: SUPER P6SBA MS-6309 ATX VA5 motherboard
Display card 1: ATI RADEON (AGP) ATI RADEON (AGP)
Display Card 2: ATI Rage XL (PCI) ATI Rage XL (PCI)
We connect a projector to the DVI port of ATI RADEON(AGP Card) and
monitor (NEC LCD1530V) to ATI Rage XL (PCI) card.
Primary card is set to AGP in BIOS.
We have the same configuration file, XF86Config-4 on both the machines.
This config file only has entries to config the Rage card. We config
the AGP Radeon card using the vesafb driver.
Our problem :
On machine1, when we try to run Xwindows, we get following Error
message:
(II) Primary Device is: PCI:01:00:00 /* this is right */
(II) ATI: Candidate \"Device\" section \"ATI Rage XL\" /* this is fine */
(WW) ATI: PCI/AGP Mach64 in slot 0:15:0 could not be detected
(WW) ATI: PCI/AGP Mach64 in slot 1:00:0 could not be detected
(EE) No Devices detected
whereas on machine2 which has almost same configuration, it works
absolutely fine.
Please let us know where should we look to solve this problem, what
could be the probable solution?
Thanks in advance,
Regards,
Vikram B, Jing Xu
Graduate Students - CS Dept
University of New Mexico
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
