I was playing with an old box and a PCI GVX1 card I have.
After building X4.2.0 from source, the first time I ran XF86Config it noticed
that the box also has an S3trio64 on-board, but X crashed before I could set
it up.
After that I had to resort to using XF86Config -textmode to configure it.
The problem I have is the S3trio64 reports no memory at all, hence, no valid
modelines and no display. The GVX1 card is working fine.
Is it possible to get Dualhead working with this setup?
I've tried adding a VideoRam line to the device entry, but this does not seem
to make any difference.
Any Ideas?
Cheers,
John Gay
johngay@debian:~$ cat XF86Config
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "xie"
Load "pex5"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "extmod"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 42.5
VertRefresh 40.0 - 150.0
EndSection
Section "Monitor"
Identifier "Monitor1"
HorizSync 31.5 - 42.5
VertRefresh 40.0 - 150.0
EndSection
Section "Device"
# ChipSet "pm3"
Identifier "Card0"
Driver "glint"
Card "3Dlabs pm3"
BusID "PCI:0:13:0"
EndSection
Section "Device"
# ChipSet "Trio32/64"
Identifier "Card1"
Driver "s3"
Card "S3 Trio32/64"
VideoRam 4096
Option "slow_vram" "on"
BusID "PCI:0:16:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480" "640x400"
"512x384" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480" "640x400"
"512x384" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 8
Black 0x0000 0x0000 0x0000
White 0x0000 0x0000 0x0000
Modes "1152x864" "1024x768" "800x600" "640x480" "640x400"
"512x384" "400x300" "320x240" "320x200"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x960" "1152x864" "1024x768" "800x600" "640x480"
"640x400" "512x384" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 16
Black 0x0000 0x0000 0x0000
White 0x0000 0x0000 0x0000
Modes "1280x960" "1152x864" "1024x768" "800x600" "640x480"
"640x400" "512x384" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 8
Black 0x0000 0x0000 0x0000
White 0x0000 0x0000 0x0000
Modes "1280x960" "1152x864" "1024x768" "800x600" "640x480"
"640x400" "512x384" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 4
Black 0x0000 0x0000 0x0000
White 0x0000 0x0000 0x0000
Modes "1280x960" "1152x864" "1024x768" "800x600" "640x480"
"640x400" "512x384" "400x300" "320x240" "320x200"
EndSubSection
EndSection
johngay@debian:~$
johngay@debian:~$ cat XFree86.0.log
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.2.20 i586 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.(==)
Log file: "/var/log/XFree86.0.log", Time: Sat Jul 20 21:29:00 2002
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse0"
(==) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II)
PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,122d card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,122e card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,1230 card 0000,0000 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:0d:0: chip 3d3d,000a card 3d3d,0134 rev 01 class 03,00,00 hdr 80
(II) PCI: 00:0d:1: chip 3d3d,0008 card 3d3d,0134 rev 01 class 0b,40,00 hdr 80
(II) PCI: 00:10:0: chip 5333,8811 card 0000,0000 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:13:0) 3Dlabs GLINT Permedia 3 rev 1, Mem @ 0xfd860000/17,
0xf8000000/26, 0xf4000000/26, BIOS @ 0x80000000/16
(--) PCI: (0:13:1) 3Dlabs GLINT Gamma rev 1, Mem @ 0xfd840000/17
(--) PCI: (0:16:0) S3 Trio32/64 rev 0, Mem @ 0xfd000000/23, BIOS @
0x000c0000/16
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xfd840000 - 0xfd85ffff (0x20000) MX[B]
[1] -1 0x80000000 - 0x8000ffff (0x10000) MX[B](B)
[2] -1 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[3] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[4] -1 0xfd860000 - 0xfd87ffff (0x20000) MX[B](B)
[5] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) Inactive PCI resource ranges:
[0] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[1] -1 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xfd840000 - 0xfd85ffff (0x20000) MX[B]
[1] -1 0x80000000 - 0x8000ffff (0x10000) MX[B](B)
[2] -1 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[3] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[4] -1 0xfd860000 - 0xfd87ffff (0x20000) MX[B](B)
[5] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[1] -1 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfd840000 - 0xfd85ffff (0x20000) MX[B]
[6] -1 0x80000000 - 0x8000ffff (0x10000) MX[B](B)
[7] -1 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0xfd860000 - 0xfd87ffff (0x20000) MX[B](B)
[10] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[11] -1 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B)
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) LoadModule: "xie"
(WW) Warning, couldn't open module xie
(II) UnloadModule: "xie"
(EE) Failed to load module "xie" (module does not exist, 0)
(II) LoadModule: "pex5"
(WW) Warning, couldn't open module pex5
(II) UnloadModule: "pex5"
(EE) Failed to load module "pex5" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "glint"
(II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o
(II) Module glint: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "s3"
(II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o
(II) Module s3: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.3.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
Trio32/64, Aurora64V+
(II) Primary Device is: PCI 00:0d:0
(WW) GLINT: No matching Device section for instance (BusID PCI:0:13:1) found
(--) Chipset pm3 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfd840000 - 0xfd85ffff (0x20000) MX[B]
[6] -1 0x80000000 - 0x8000ffff (0x10000) MX[B](B)
[7] -1 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0xfd860000 - 0xfd87ffff (0x20000) MX[B](B)
[10] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[11] -1 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B)
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(--) Chipset Trio32/64 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfd840000 - 0xfd85ffff (0x20000) MX[B]
[6] -1 0x80000000 - 0x8000ffff (0x10000) MX[B](B)
[7] -1 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0xfd860000 - 0xfd87ffff (0x20000) MX[B](B)
[10] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[11] -1 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B)
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xfd840000 - 0xfd85ffff (0x20000) MX[B]
[6] -1 0x80000000 - 0x8000ffff (0x10000) MX[B](B)
[7] -1 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0xfd860000 - 0xfd87ffff (0x20000) MX[B](B)
[10] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[11] -1 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B)
[12] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] 1 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 1 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 1 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[21] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[22] 0 0x000003c0 - 0x000003df (0x20) IS[B]
[23] 1 0x000003b0 - 0x000003bb (0xc) IS[B]
[24] 1 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(**) GLINT(0): Depth 24, (--) framebuffer bpp 32
(==) GLINT(0): RGB weight 888
(==) GLINT(0): Default visual is TrueColor
(==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0)
(==) GLINT(0): Using HW cursor
(--) GLINT(0): Not using Linux framebuffer device
(--) GLINT(0): Chipset: "pm3"
(--) GLINT(0): Linear framebuffer at 0xF4000000
(--) GLINT(0): MMIO registers at 0xFD860000
(WW) System lacks support for changing MTRRs
(II) GLINT(0): Using SGRAM memory
(--) GLINT(0): VideoRAM: 32768 kByte
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(--) GLINT(0): FIFO Size is 120 DWORDS
(==) GLINT(0): Min pixel clock is 16 MHz
(--) GLINT(0): Max pixel clock is 300 MHz
(II) GLINT(0): Monitor0: Using hsync range of 31.50-42.50 kHz
(II) GLINT(0): Monitor0: Using vrefresh range of 40.00-150.00 Hz
(II) GLINT(0): Clock range: 16.25 to 300.00 MHz
(II) GLINT(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x480" (hsync out of range)
(II) GLINT(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (hsync out of range)
(II) GLINT(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (hsync out of range)
(II) GLINT(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (hsync out of range)
(II) GLINT(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (hsync out of range) (II)
GLINT(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (hsync out of range) (II)
GLINT(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (hsync out of range) (II)
GLINT(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (hsync out of range) (II)
GLINT(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1152x864" (hsync out of range) (II)
GLINT(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x960" (hsync out of range) (II)
GLINT(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x960" (hsync out of range) (II)
GLINT(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x1024" (hsync out of range)(II)
GLINT(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x1024" (hsync out of range)(II)
GLINT(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x1024" (hsync out of range)(II)
GLINT(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (hsync out of range)(II)
GLINT(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (hsync out of range)(II)
GLINT(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (hsync out of range)(II)
GLINT(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (hsync out of range)(II)
GLINT(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (hsync out of range)(II)
GLINT(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1792x1344" (hsync out of range)(II)
GLINT(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1792x1344" (hsync out of range)(II)
GLINT(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1856x1392" (hsync out of range)(II)
GLINT(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1856x1392" (hsync out of range)(II)
GLINT(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1920x1440" (hsync out of range)(II)
GLINT(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1920x1440" (hsync out of range)(II)
GLINT(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "832x624" (hsync out of range)
(II) GLINT(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1400x1050" (hsync out of range)(II)
GLINT(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1400x1050" (hsync out of range)(II)
GLINT(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1024" (hsync out of range)(II)
GLINT(0): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(II) GLINT(0): Not using mode "1152x864" (no mode of this name)
(II) GLINT(0): Not using mode "1024x768" (no mode of this name)
(II) GLINT(0): Not using mode "512x384" (no mode of this name)
(II) GLINT(0): Not using mode "400x300" (no mode of this name)
(II) GLINT(0): Not using mode "320x240" (no mode of this name)
(II) GLINT(0): Not using mode "320x200" (no mode of this name)
(--) GLINT(0): Virtual size is 800x600 (pitch 800)
(**) GLINT(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) GLINT(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
+hsync +vsync
(**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) GLINT(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500
-hsync -vsync
(**) GLINT(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445
-hsync +vsync
(==) GLINT(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.5
(II) GLINT(0): I2C bus "DDC" initialized.
(II) GLINT(0): I2C bus "Video" initialized.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) s3(1): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) s3(1): Depth 24, (--) framebuffer bpp 32
(==) s3(1): RGB weight 888
(==) s3(1): Default visual is TrueColor
(**) s3(1): Option "slow_vram" "on"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(EE) s3(1): Cannot read V_BIOS
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) s3(1): initializing int10
(EE) s3(1): Cannot read V_BIOS
(==) s3(1): Using gamma correction (1.0, 1.0, 1.0)
(**) s3(1): Chipset: "Trio32/64"
(--) s3(1): Framebuffer @ 0xfd000000
(--) s3(1): videoRam = 0 Kb
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Reloading /usr/X11R6/lib/modules/libramdac.a
(--) s3(1): MCLK 6.996 Mhz
(--) s3(1): RefClock: 16000
(--) s3(1): Max pixel clock at this depth is 50 Mhz
(II) s3(1): Monitor1: Using hsync range of 31.50-42.50 kHz
(II) s3(1): Monitor1: Using vrefresh range of 40.00-150.00 Hz
(II) s3(1): Clock range: 16.00 to 50.00 MHz
(II) s3(1): Not using default mode "640x350" (insufficient memory for mode)
(II) s3(1): Not using default mode "320x175" (insufficient memory for mode)
(II) s3(1): Not using default mode "640x400" (insufficient memory for mode)
(II) s3(1): Not using default mode "320x200" (insufficient memory for mode)
(II) s3(1): Not using default mode "720x400" (insufficient memory for mode)
(II) s3(1): Not using default mode "360x200" (insufficient memory for mode)
(II) s3(1): Not using default mode "640x480" (insufficient memory for mode)
(II) s3(1): Not using default mode "320x240" (insufficient memory for mode)
(II) s3(1): Not using default mode "640x480" (insufficient memory for mode)
(II) s3(1): Not using default mode "320x240" (insufficient memory for mode)
(II) s3(1): Not using default mode "640x480" (insufficient memory for mode)
(II) s3(1): Not using default mode "320x240" (insufficient memory for mode)
(II) s3(1): Not using default mode "640x480" (insufficient memory for mode)
(II) s3(1): Not using default mode "320x240" (insufficient memory for mode)
(II) s3(1): Not using default mode "800x600" (insufficient memory for mode)
(II) s3(1): Not using default mode "400x300" (insufficient memory for mode)
(II) s3(1): Not using default mode "800x600" (insufficient memory for mode)
(II) s3(1): Not using default mode "400x300" (insufficient memory for mode)
(II) s3(1): Not using default mode "800x600" (insufficient memory for mode)
(II) s3(1): Not using default mode "400x300" (insufficient memory for mode)
(II) s3(1): Not using default mode "800x600" (insufficient memory for mode)
(II) s3(1): Not using default mode "400x300" (insufficient memory for mode)
(II) s3(1): Not using default mode "800x600" (insufficient memory for mode)
(II) s3(1): Not using default mode "400x300" (insufficient memory for mode)
(II) s3(1): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(1): Not using default mode "512x384" (insufficient memory for mode)
(II) s3(1): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(1): Not using default mode "512x384" (insufficient memory for mode)
(II) s3(1): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(1): Not using default mode "512x384" (insufficient memory for mode)
(II) s3(1): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(1): Not using default mode "512x384" (insufficient memory for mode)
(II) s3(1): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(1): Not using default mode "512x384" (insufficient memory for mode)
(II) s3(1): Not using default mode "1152x864" (insufficient memory for mode)
(II) s3(1): Not using default mode "576x432" (insufficient memory for mode)
(II) s3(1): Not using default mode "1280x960" (insufficient memory for mode)
(II) s3(1): Not using default mode "640x480" (insufficient memory for mode)
(II) s3(1): Not using default mode "1280x960" (insufficient memory for mode)
(II) s3(1): Not using default mode "640x480" (insufficient memory for mode)
(II) s3(1): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(1): Not using default mode "640x512" (insufficient memory for mode)
(II) s3(1): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(1): Not using default mode "640x512" (insufficient memory for mode)
(II) s3(1): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(1): Not using default mode "640x512" (insufficient memory for mode)
(II) s3(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(1): Not using default mode "800x600" (insufficient memory for mode)
(II) s3(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(1): Not using default mode "800x600" (insufficient memory for mode)
(II) s3(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(1): Not using default mode "800x600" (insufficient memory for mode)
(II) s3(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(1): Not using default mode "800x600" (insufficient memory for mode)
(II) s3(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(1): Not using default mode "800x600" (insufficient memory for mode)
(II) s3(1): Not using default mode "1792x1344" (insufficient memory for mode)
(II) s3(1): Not using default mode "896x672" (insufficient memory for mode)
(II) s3(1): Not using default mode "1792x1344" (insufficient memory for mode)
(II) s3(1): Not using default mode "896x672" (insufficient memory for mode)
(II) s3(1): Not using default mode "1856x1392" (insufficient memory for mode)
(II) s3(1): Not using default mode "928x696" (insufficient memory for mode)
(II) s3(1): Not using default mode "1856x1392" (insufficient memory for mode)
(II) s3(1): Not using default mode "928x696" (insufficient memory for mode)
(II) s3(1): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(1): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(1): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(1): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(1): Not using default mode "832x624" (insufficient memory for mode)
(II) s3(1): Not using default mode "416x312" (insufficient memory for mode)
(II) s3(1): Not using default mode "1400x1050" (insufficient memory for mode)
(II) s3(1): Not using default mode "700x525" (insufficient memory for mode)
(II) s3(1): Not using default mode "1400x1050" (insufficient memory for mode)
(II) s3(1): Not using default mode "700x525" (insufficient memory for mode)
(II) s3(1): Not using default mode "1600x1024" (insufficient memory for mode)
(II) s3(1): Not using default mode "800x512" (insufficient memory for mode)
(WW) s3(1): Mode pool is empty
(EE) s3(1): no valid modes found
(II) UnloadModule: "s3"
(II) UnloadModule: "ramdac"
(II) UnloadModule: "int10"
(II) UnloadModule: "vbe"
(II) Unloading /usr/X11R6/lib/modules/libvbe.a
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 1 0xfd000000 - 0xfd7fffff (0x800000) MS[B]
[1] 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
[2] 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[3] 0 0xfd860000 - 0xfd87ffff (0x20000) MX[B]
[4] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[5] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[6] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[7] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[8] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[9] -1 0xfd840000 - 0xfd85ffff (0x20000) MX[B]
[10] -1 0x80000000 - 0x8000ffff (0x10000) MX[B](B)
[11] -1 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[12] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[13] -1 0xfd860000 - 0xfd87ffff (0x20000) MX[B](B)
[14] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[15] -1 0xfd000000 - 0xfd7fffff (0x800000) MX[B](B)
[16] 1 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[17] 1 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[18] 1 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[19] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[22] 1 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[23] 1 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) GLINT(0): I2C device "DDC:ddc2" registered.
(II) GLINT(0): I2C device "DDC:ddc2" removed.
(II) GLINT(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided WriteBitmap replacement
Driver provided WritePixmap replacement
Setting up tile and stipple cache:
32 128x128 slots
12 256x256 slots
5 512x512 slots
(==) GLINT(0): Backing store disabled
(==) GLINT(0): Silken mouse enabled
(II) GLINT(0): direct rendering disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Keyboard "Keyboard0" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse0: Buttons: 3
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing
from list!
johngay@debian:~$
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
