Oh. Well, this could be it. But I have no idea what to put as MHz for the FPClock# option.. any ideas?
Erik. ----- Original Message ----- From: "David Bateman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, July 26, 2002 10:10 AM Subject: Re: [Xpert]XFree86 4.2.0 on a Toshiba Satellite Pro 410CDDT (C&T CT65548) > According to Erik Paulsen Sk�lerud <[EMAIL PROTECTED]> (on 07/24/02): > > I wonder if anyone knows the solution to this: > > > > http://www.xfree86.org/pipermail/xpert/2002-March/016093.html > > > > I suffer of the same problems with my laptop, but there were no replies to > > the post mentioned above. > > > > One difference between 3.x and 4.x is that the panel dotclock is not > programmed by default, since it is assumed that the BIOS has correctly > set the dotclock and it won't need changing. Perhaps yours does need > to be changed, so use the option "FPClock8", "FPClock16" or > "FPClock24". > > One thing with the 65548 is that you can't read the programmed clock > from the chip. So we won't be able to restore the clock set by the > BIOS for the test console. For this reason you might need the > "TextClockFreq" option to set the console clock back to a sane > value when X quits. > > Regards > David > _______________________________________________ > Xpert mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xpert > > _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
